From ae3bc727320274c264ae2101f79d90a2c377b751 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:20:15 -0400 Subject: [PATCH 1/9] switch most of the setup to pyproject.toml\ --- .flake8 | 7 + .pre-commit-config.yaml | 54 ++--- bids/ext/reports/__init__.py | 4 + bids/ext/reports/_version.py | 75 +++++-- bids/ext/reports/utils.py | 2 +- pyproject.toml | 96 ++++++++- setup.cfg | 85 -------- setup.py | 21 +- versioneer.py | 394 ++++++++++++++++++++++++----------- 9 files changed, 465 insertions(+), 273 deletions(-) create mode 100644 .flake8 mode change 100755 => 100644 setup.py diff --git a/.flake8 b/.flake8 new file mode 100644 index 0000000..1f4ee0f --- /dev/null +++ b/.flake8 @@ -0,0 +1,7 @@ +[flake8] +max-line-length = 99 +exclude = *build/,_version.py,due.py +putty-ignore = + */__init__.py : +F401 +ignore = E203,E402,E722,W503 +docstring-convention = numpy diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml index ddda83e..e1dc080 100644 --- a/.pre-commit-config.yaml +++ b/.pre-commit-config.yaml @@ -12,28 +12,12 @@ repos: - id: check-added-large-files - id: check-case-conflict - -- repo: https://github.com/psf/black - rev: 23.3.0 - hooks: - - id: black - -- repo: https://github.com/pycqa/flake8 - rev: 6.0.0 - hooks: - - id: flake8 - args: [--config=setup.cfg] - -# - repo: https://github.com/pre-commit/mirrors-mypy -# rev: v0.991 -# hooks: -# - id: mypy - -- repo: https://github.com/pyCQA/isort - rev: 5.12.0 +- repo: https://github.com/codespell-project/codespell + rev: v2.2.4 hooks: - - id: isort - + - id: codespell + args: [--toml=pyproject.toml] + additional_dependencies: [tomli] - repo: https://github.com/jumanjihouse/pre-commit-hook-yamlfmt rev: 0.2.3 @@ -41,15 +25,35 @@ repos: - id: yamlfmt args: [--mapping, '2', --sequence, '2', --offset, '0'] +# - repo: https://github.com/asottile/setup-cfg-fmt +# rev: v2.2.0 +# hooks: +# - id: setup-cfg-fmt - repo: https://github.com/asottile/pyupgrade rev: v3.3.1 hooks: - id: pyupgrade - args: [--py37-plus] + args: [--py38-plus] +- repo: https://github.com/psf/black + rev: 22.12.0 + hooks: + - id: black + args: [--config=pyproject.toml, --verbose] -- repo: https://github.com/asottile/setup-cfg-fmt - rev: v2.2.0 +# - repo: https://github.com/pre-commit/mirrors-mypy +# rev: v0.991 +# hooks: +# - id: mypy + +# - repo: https://github.com/pyCQA/isort +# rev: 5.11.4 +# hooks: +# - id: isort + +- repo: https://github.com/pycqa/flake8 + rev: 6.0.0 hooks: - - id: setup-cfg-fmt + - id: flake8 + args: [--config=.flake8] diff --git a/bids/ext/reports/__init__.py b/bids/ext/reports/__init__.py index 63d5e21..aa3a306 100644 --- a/bids/ext/reports/__init__.py +++ b/bids/ext/reports/__init__.py @@ -15,3 +15,7 @@ del due, Doi __version__ = _version.get_versions()["version"] + +from . import _version + +__version__ = _version.get_versions()["version"] diff --git a/bids/ext/reports/_version.py b/bids/ext/reports/_version.py index 26ebc09..3e9c8b1 100644 --- a/bids/ext/reports/_version.py +++ b/bids/ext/reports/_version.py @@ -4,8 +4,9 @@ # directories (produced by setup.py build) will contain a much shorter file # that just contains the computed version number. -# This file is released into the public domain. Generated by -# versioneer-0.20 (https://github.com/python-versioneer/python-versioneer) +# This file is released into the public domain. +# Generated by versioneer-0.28 +# https://github.com/python-versioneer/python-versioneer """Git implementation of _version.py.""" @@ -14,6 +15,8 @@ import re import subprocess import sys +from typing import Callable, Dict +import functools def get_keywords(): @@ -29,7 +32,7 @@ def get_keywords(): return keywords -class VersioneerConfig: # pylint: disable=too-few-public-methods +class VersioneerConfig: """Container for Versioneer configuration parameters.""" @@ -39,10 +42,10 @@ def get_config(): # _version.py cfg = VersioneerConfig() cfg.VCS = "git" - cfg.style = "pep440-pre" + cfg.style = "pep440" cfg.tag_prefix = "" - cfg.parentdir_prefix = "" - cfg.versionfile_source = "bids/_version.py" + cfg.parentdir_prefix = "None" + cfg.versionfile_source = "bids/ext/reports/_version.py" cfg.verbose = False return cfg @@ -51,8 +54,8 @@ class NotThisMethod(Exception): """Exception raised if a method is not valid for the current scenario.""" -LONG_VERSION_PY = {} -HANDLERS = {} +LONG_VERSION_PY: Dict[str, str] = {} +HANDLERS: Dict[str, Dict[str, Callable]] = {} def register_vcs_handler(vcs, method): # decorator @@ -68,11 +71,18 @@ def decorate(f): return decorate -# pylint:disable=too-many-arguments,consider-using-with # noqa def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env=None): """Call the given command(s).""" assert isinstance(commands, list) process = None + + popen_kwargs = {} + if sys.platform == "win32": + # This hides the console window if pythonw.exe is used + startupinfo = subprocess.STARTUPINFO() + startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW + popen_kwargs["startupinfo"] = startupinfo + for command in commands: try: dispcmd = str([command] + args) @@ -83,6 +93,7 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= env=env, stdout=subprocess.PIPE, stderr=(subprocess.PIPE if hide_stderr else None), + **popen_kwargs, ) break except OSError: @@ -95,7 +106,7 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= return None, None else: if verbose: - print("unable to find command, tried {}".format(commands)) + print(f"unable to find command, tried {commands}") return None, None stdout = process.communicate()[0].strip().decode() if process.returncode != 0: @@ -247,7 +258,14 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): if sys.platform == "win32": GITS = ["git.cmd", "git.exe"] - _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=True) + # GIT_DIR can interfere with correct operation of Versioneer. + # It may be intended to be passed to the Versioneer-versioned project, + # but that should not change where we get our version from. + env = os.environ.copy() + env.pop("GIT_DIR", None) + runner = functools.partial(runner, env=env) + + _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=not verbose) if rc != 0: if verbose: print("Directory %s not under git control" % root) @@ -264,7 +282,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): "--always", "--long", "--match", - "%s*" % tag_prefix, + f"{tag_prefix}[[:digit:]]*", ], cwd=root, ) @@ -330,7 +348,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): # TAG-NUM-gHEX mo = re.search(r"^(.+)-(\d+)-g([0-9a-f]+)$", git_describe) if not mo: - # unparseable. Maybe git-describe is misbehaving? + # unparsable. Maybe git-describe is misbehaving? pieces["error"] = "unable to parse git-describe output: '%s'" % describe_out return pieces @@ -341,8 +359,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): fmt = "tag '%s' doesn't start with prefix '%s'" print(fmt % (full_tag, tag_prefix)) pieces["error"] = "tag '{}' doesn't start with prefix '{}'".format( - full_tag, - tag_prefix, + full_tag, tag_prefix ) return pieces pieces["closest-tag"] = full_tag[len(tag_prefix) :] @@ -356,8 +373,8 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): else: # HEX: no tags pieces["closest-tag"] = None - count_out, rc = runner(GITS, ["rev-list", "HEAD", "--count"], cwd=root) - pieces["distance"] = int(count_out) # total number of commits + out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) + pieces["distance"] = len(out.split()) # total number of commits # commit date: see ISO-8601 comment in git_versions_from_keywords() date = runner(GITS, ["show", "-s", "--format=%ci", "HEAD"], cwd=root)[0].strip() @@ -429,16 +446,34 @@ def render_pep440_branch(pieces): return rendered +def pep440_split_post(ver): + """Split pep440 version string at the post-release segment. + + Returns the release segments before the post-release and the + post-release version number (or -1 if no post-release segment is present). + """ + vc = str.split(ver, ".post") + return vc[0], int(vc[1] or 0) if len(vc) == 2 else None + + def render_pep440_pre(pieces): - """TAG[.post0.devDISTANCE] -- No -dirty. + """TAG[.postN.devDISTANCE] -- No -dirty. Exceptions: 1: no tags. 0.post0.devDISTANCE """ if pieces["closest-tag"]: - rendered = pieces["closest-tag"] if pieces["distance"]: - rendered += ".post0.dev%d" % pieces["distance"] + # update the post release segment + tag_version, post_version = pep440_split_post(pieces["closest-tag"]) + rendered = tag_version + if post_version is not None: + rendered += ".post%d.dev%d" % (post_version + 1, pieces["distance"]) + else: + rendered += ".post0.dev%d" % (pieces["distance"]) + else: + # no commits, use the tag as the version + rendered = pieces["closest-tag"] else: # exception #1 rendered = "0.post0.dev%d" % pieces["distance"] diff --git a/bids/ext/reports/utils.py b/bids/ext/reports/utils.py index 5ca01f0..f154a5d 100644 --- a/bids/ext/reports/utils.py +++ b/bids/ext/reports/utils.py @@ -6,7 +6,7 @@ methods section from a BIDS dataset. """ import logging -from typing import Any, List, Set +from typing import Any logging.basicConfig() LOGGER = logging.getLogger("pybids-reports.utils") diff --git a/pyproject.toml b/pyproject.toml index e62edb4..fa6fb06 100644 --- a/pyproject.toml +++ b/pyproject.toml @@ -1,5 +1,81 @@ [build-system] -requires = ["setuptools >= 30.3.0", "wheel"] +requires = ["setuptools", "versioneer[toml]"] +build-backend = "setuptools.build_meta" + +# [build-system] +# requires = ["hatchling", "hatch-vcs", "versioneer[toml]"] +# build-backend = "hatchling.build" + +# [tool.hatch.build.targets.wheel] +# packages = ["bids/ext/reports"] + +# [tool.hatch.version] +# source = "vcs" + +# [tool.hatch.build.hooks.vcs] +# version-file = "bids/ext/reports/_version.py" + +[project] +name = "pybids_reports" +description = "pybids-reports: report generator for BIDS datasets" +authors = [{ name = "PyBIDS Developers", email = "bids-discussion@googlegroups.com"}] +maintainers = [{ name = "PyBIDS Developers", email = "bids-discussion@googlegroups.com" }] +readme = "README.md" +license = { file = "LICENSE" } +requires-python = ">=3.8" +dependencies = [ + "chevron", + "pybids>=0.15", + "nibabel", + "num2words", +] +classifiers = [ + "Development Status :: 3 - Alpha", + "Environment :: Console", + "Intended Audience :: Science/Research", + "License :: OSI Approved :: MIT License", + "Operating System :: OS Independent", + "Programming Language :: Python", + "Programming Language :: Python :: 3", + "Programming Language :: Python :: 3 :: Only", + "Topic :: Scientific/Engineering", +] +# Version from setuptools_scm +dynamic = ["version"] + +[project.urls] +Homepage = "http://github.com/bids-standard/pybids-reports" + +[project.optional-dependencies] +doc = [ + "numpydoc", + "sphinx>=2.2", + "sphinx-rtd-theme", +] +test = [ + "codecov", + "flake8-black", + "flake8-docstrings", + "flake8-isort", + "pytest>=3.3", + "pytest-cov", + 'rich' +] +docs=["pybids_reports[doc]"] +ci_tests = [ + "pybids_reports[test]", + "pytest-xdist" +] +dev = [ + "pybids_reports[doc]", + "pybids_reports[test]" +] + +[tool.versioneer] +VCS = "git" +style = "pep440" +versionfile_source = "bids/ext/reports/_version.py" +versionfile_build = "bids/ext/reports/_version.py" [tool.black] line-length = 99 @@ -26,3 +102,21 @@ exclude = ''' [tool.isort] profile = "black" multi_line_output = 3 + + +[tool.codespell] +skip = "./.git,versioneer.py,_version.py,bids/ext/reports/tests/data/*" +ignore-words-list = "te" + + +[tool.mypy] +exclude = ['bids/ext/reports/tests/'] + +[[tool.mypy.overrides]] +module = [ + 'ext.reports.tests.*', + 'ext.reports._version.*', + 'ext.reports.due.*', + 'ext.versioneer.*', +] +ignore_errors = true diff --git a/setup.cfg b/setup.cfg index f38180f..39a1d53 100644 --- a/setup.cfg +++ b/setup.cfg @@ -1,35 +1,5 @@ -[metadata] -name = pybids_reports -description = pybids-reports: report generator for BIDS datasets -long_description = file: README.md -long_description_content_type = text/markdown -url = http://github.com/bids-standard/pybids-reports -author = PyBIDS Developers -author_email = bids-discussion@googlegroups.com -maintainer = PyBIDS Developers -maintainer_email = bids-discussion@googlegroups.com -license = MIT -license_file = LICENSE -platforms = OS Independent -classifiers = - Development Status :: 3 - Alpha - Environment :: Console - Intended Audience :: Science/Research - License :: OSI Approved :: MIT License - Operating System :: OS Independent - Programming Language :: Python - Programming Language :: Python :: 3 - Programming Language :: Python :: 3 :: Only - Topic :: Scientific/Engineering - [options] packages = find_namespace: -install_requires = - chevron - nibabel - num2words - pybids>=0.15 -python_requires = >=3.7 include_package_data = False [options.packages.find] @@ -37,62 +7,7 @@ include = bids.ext.EXTENSION bids.ext.EXTENSION.* -[options.extras_require] -ci_tests = - %(test)s - pytest-xdist -dev = - %(doc)s - %(test)s -doc = - numpydoc - sphinx>=2.2 - sphinx-rtd-theme -docs = - %(doc)s -test = - codecov - flake8-black - flake8-docstrings - flake8-isort - pytest>=3.3 - pytest-cov -tests = - %(test)s [options.package_data] * = config/* - -[versioneer] -VCS = git -style = pep440 -versionfile_source = bids/ext/reports/_version.py -versionfile_build = bids/ext/reports/_version.py - -[codespell] -skip = ./.git,external,versioneer.py,_version.py -ignore-words = .github/codespell_ignore_words.txt - -[flake8] -max-line-length = 99 -exclude = *build/,_version.py,due.py -putty-ignore = - */__init__.py : +F401 -ignore = E203,E402,E722,W503 -docstring-convention = numpy - -[mypy] -exclude = ['bids/ext/reports/tests/'] - -[mypy-ext.reports.tests.*] -ignore_errors = True - -[mypy-ext.reports._version.*] -ignore_errors = True - -[mypy-ext.reports.due.*] -ignore_errors = True - -[mypy-versioneer.*] -ignore_errors = True diff --git a/setup.py b/setup.py old mode 100755 new mode 100644 index b3c413e..f01ff7f --- a/setup.py +++ b/setup.py @@ -1,21 +1,8 @@ #!/usr/bin/env python -import sys - from setuptools import setup - import versioneer -# Give setuptools a hint to complain if it's too old a version -# 30.3.0 allows us to put most metadata in setup.cfg -# Should match pyproject.toml -SETUP_REQUIRES = ["setuptools >= 30.3.0"] -# This enables setuptools to install wheel on-the-fly -SETUP_REQUIRES += ["wheel"] if "bdist_wheel" in sys.argv else [] - -if __name__ == "__main__": - setup( - name="pybids-reports", - version=versioneer.get_version(), - cmdclass=versioneer.get_cmdclass(), - setup_requires=SETUP_REQUIRES, - ) +setup( + version=versioneer.get_version(), + cmdclass=versioneer.get_cmdclass(), +) diff --git a/versioneer.py b/versioneer.py index bfc5828..777e4bb 100644 --- a/versioneer.py +++ b/versioneer.py @@ -1,4 +1,4 @@ -# Version: 0.20 +# Version: 0.28 """The Versioneer - like a rocketeer, but for versions. @@ -8,12 +8,12 @@ * like a rocketeer, but for versions! * https://github.com/python-versioneer/python-versioneer * Brian Warner -* License: Public Domain -* Compatible with: Python 3.6, 3.7, 3.8, 3.9 and pypy3 +* License: Public Domain (Unlicense) +* Compatible with: Python 3.7, 3.8, 3.9, 3.10 and pypy3 * [![Latest Version][pypi-image]][pypi-url] * [![Build Status][travis-image]][travis-url] -This is a tool for managing a recorded version number in distutils-based +This is a tool for managing a recorded version number in setuptools-based python projects. The goal is to remove the tedious and error-prone "update the embedded version string" step from your release process. Making a new release should be as easy as recording a new tag in your version-control @@ -22,10 +22,38 @@ ## Quick Install +Versioneer provides two installation modes. The "classic" vendored mode installs +a copy of versioneer into your repository. The experimental build-time dependency mode +is intended to allow you to skip this step and simplify the process of upgrading. + +### Vendored mode + +* `pip install versioneer` to somewhere in your $PATH + * A [conda-forge recipe](https://github.com/conda-forge/versioneer-feedstock) is + available, so you can also use `conda install -c conda-forge versioneer` +* add a `[tool.versioneer]` section to your `pyproject.toml` or a + `[versioneer]` section to your `setup.cfg` (see [Install](INSTALL.md)) + * Note that you will need to add `tomli; python_version < "3.11"` to your + build-time dependencies if you use `pyproject.toml` +* run `versioneer install --vendor` in your source tree, commit the results +* verify version information with `python setup.py version` + +### Build-time dependency mode + * `pip install versioneer` to somewhere in your $PATH -* add a `[versioneer]` section to your setup.cfg (see [Install](INSTALL.md)) -* run `versioneer install` in your source tree, commit the results -* Verify version information with `python setup.py version` + * A [conda-forge recipe](https://github.com/conda-forge/versioneer-feedstock) is + available, so you can also use `conda install -c conda-forge versioneer` +* add a `[tool.versioneer]` section to your `pyproject.toml` or a + `[versioneer]` section to your `setup.cfg` (see [Install](INSTALL.md)) +* add `versioneer` (with `[toml]` extra, if configuring in `pyproject.toml`) + to the `requires` key of the `build-system` table in `pyproject.toml`: + ```toml + [build-system] + requires = ["setuptools", "versioneer[toml]"] + build-backend = "setuptools.build_meta" + ``` +* run `versioneer install --no-vendor` in your source tree, commit the results +* verify version information with `python setup.py version` ## Version Identifiers @@ -230,9 +258,10 @@ To upgrade your project to a new release of Versioneer, do the following: * install the new Versioneer (`pip install -U versioneer` or equivalent) -* edit `setup.cfg`, if necessary, to include any new configuration settings - indicated by the release notes. See [UPGRADING](./UPGRADING.md) for details. -* re-run `versioneer install` in your source tree, to replace +* edit `setup.cfg` and `pyproject.toml`, if necessary, + to include any new configuration settings indicated by the release notes. + See [UPGRADING](./UPGRADING.md) for details. +* re-run `versioneer install --[no-]vendor` in your source tree, to replace `SRC/_version.py` * commit any changed files @@ -262,9 +291,8 @@ To make Versioneer easier to embed, all its code is dedicated to the public domain. The `_version.py` that it creates is also in the public domain. -Specifically, both are released under the Creative Commons "Public Domain -Dedication" license (CC0-1.0), as described in -https://creativecommons.org/publicdomain/zero/1.0/ . +Specifically, both are released under the "Unlicense", as described in +https://unlicense.org/. [pypi-image]: https://img.shields.io/pypi/v/versioneer.svg [pypi-url]: https://pypi.python.org/pypi/versioneer/ @@ -273,6 +301,11 @@ [travis-url]: https://travis-ci.com/github/python-versioneer/python-versioneer """ +# pylint:disable=invalid-name,import-outside-toplevel,missing-function-docstring +# pylint:disable=missing-class-docstring,too-many-branches,too-many-statements +# pylint:disable=raise-missing-from,too-many-lines,too-many-locals,import-error +# pylint:disable=too-few-public-methods,redefined-outer-name,consider-using-with +# pylint:disable=attribute-defined-outside-init,too-many-arguments import configparser import errno @@ -281,9 +314,21 @@ import re import subprocess import sys +from pathlib import Path +from typing import Callable, Dict +import functools + +have_tomllib = True +if sys.version_info >= (3, 11): + import tomllib +else: + try: + import tomli as tomllib + except ImportError: + have_tomllib = False -class VersioneerConfig: # pylint: disable=too-few-public-methods # noqa +class VersioneerConfig: """Container for Versioneer configuration parameters.""" @@ -320,7 +365,7 @@ def get_root(): my_path = os.path.realpath(os.path.abspath(__file__)) me_dir = os.path.normcase(os.path.splitext(my_path)[0]) vsr_dir = os.path.normcase(os.path.splitext(versioneer_py)[0]) - if me_dir != vsr_dir: + if me_dir != vsr_dir and "VERSIONEER_PEP518" not in globals(): print( "Warning: build in %s is using versioneer.py from %s" % (os.path.dirname(my_path), versioneer_py) @@ -332,27 +377,36 @@ def get_root(): def get_config_from_root(root): """Read the project setup.cfg file to determine Versioneer config.""" - # This might raise EnvironmentError (if setup.cfg is missing), or + # This might raise OSError (if setup.cfg is missing), or # configparser.NoSectionError (if it lacks a [versioneer] section), or # configparser.NoOptionError (if it lacks "VCS="). See the docstring at # the top of versioneer.py for instructions on writing your setup.cfg . - setup_cfg = os.path.join(root, "setup.cfg") - parser = configparser.ConfigParser() - with open(setup_cfg) as cfg_file: - parser.read_file(cfg_file) - VCS = parser.get("versioneer", "VCS") # mandatory + root = Path(root) + pyproject_toml = root / "pyproject.toml" + setup_cfg = root / "setup.cfg" + section = None + if pyproject_toml.exists() and have_tomllib: + try: + with open(pyproject_toml, "rb") as fobj: + pp = tomllib.load(fobj) + section = pp["tool"]["versioneer"] + except (tomllib.TOMLDecodeError, KeyError): + pass + if not section: + parser = configparser.ConfigParser() + with open(setup_cfg) as cfg_file: + parser.read_file(cfg_file) + parser.get("versioneer", "VCS") # raise error if missing - # Dict-like interface for non-mandatory entries - section = parser["versioneer"] + section = parser["versioneer"] - # pylint:disable=attribute-defined-outside-init # noqa cfg = VersioneerConfig() - cfg.VCS = VCS + cfg.VCS = section["VCS"] cfg.style = section.get("style", "") cfg.versionfile_source = section.get("versionfile_source") cfg.versionfile_build = section.get("versionfile_build") cfg.tag_prefix = section.get("tag_prefix") - if cfg.tag_prefix in ("''", '""'): + if cfg.tag_prefix in ("''", '""', None): cfg.tag_prefix = "" cfg.parentdir_prefix = section.get("parentdir_prefix") cfg.verbose = section.get("verbose") @@ -364,8 +418,8 @@ class NotThisMethod(Exception): # these dictionaries contain VCS-specific tools -LONG_VERSION_PY = {} -HANDLERS = {} +LONG_VERSION_PY: Dict[str, str] = {} +HANDLERS: Dict[str, Dict[str, Callable]] = {} def register_vcs_handler(vcs, method): # decorator @@ -379,11 +433,18 @@ def decorate(f): return decorate -# pylint:disable=too-many-arguments,consider-using-with # noqa def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env=None): """Call the given command(s).""" assert isinstance(commands, list) process = None + + popen_kwargs = {} + if sys.platform == "win32": + # This hides the console window if pythonw.exe is used + startupinfo = subprocess.STARTUPINFO() + startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW + popen_kwargs["startupinfo"] = startupinfo + for command in commands: try: dispcmd = str([command] + args) @@ -394,6 +455,7 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= env=env, stdout=subprocess.PIPE, stderr=(subprocess.PIPE if hide_stderr else None), + **popen_kwargs, ) break except OSError: @@ -406,7 +468,7 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= return None, None else: if verbose: - print("unable to find command, tried {}".format(commands)) + print(f"unable to find command, tried {commands}") return None, None stdout = process.communicate()[0].strip().decode() if process.returncode != 0: @@ -426,8 +488,9 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= # directories (produced by setup.py build) will contain a much shorter file # that just contains the computed version number. -# This file is released into the public domain. Generated by -# versioneer-0.20 (https://github.com/python-versioneer/python-versioneer) +# This file is released into the public domain. +# Generated by versioneer-0.28 +# https://github.com/python-versioneer/python-versioneer """Git implementation of _version.py.""" @@ -436,6 +499,8 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= import re import subprocess import sys +from typing import Callable, Dict +import functools def get_keywords(): @@ -451,7 +516,7 @@ def get_keywords(): return keywords -class VersioneerConfig: # pylint: disable=too-few-public-methods +class VersioneerConfig: """Container for Versioneer configuration parameters.""" @@ -473,8 +538,8 @@ class NotThisMethod(Exception): """Exception raised if a method is not valid for the current scenario.""" -LONG_VERSION_PY = {} -HANDLERS = {} +LONG_VERSION_PY: Dict[str, str] = {} +HANDLERS: Dict[str, Dict[str, Callable]] = {} def register_vcs_handler(vcs, method): # decorator @@ -488,12 +553,19 @@ def decorate(f): return decorate -# pylint:disable=too-many-arguments,consider-using-with # noqa def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env=None): """Call the given command(s).""" assert isinstance(commands, list) process = None + + popen_kwargs = {} + if sys.platform == "win32": + # This hides the console window if pythonw.exe is used + startupinfo = subprocess.STARTUPINFO() + startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW + popen_kwargs["startupinfo"] = startupinfo + for command in commands: try: dispcmd = str([command] + args) @@ -501,9 +573,9 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, process = subprocess.Popen([command] + args, cwd=cwd, env=env, stdout=subprocess.PIPE, stderr=(subprocess.PIPE if hide_stderr - else None)) + else None), **popen_kwargs) break - except EnvironmentError: + except OSError: e = sys.exc_info()[1] if e.errno == errno.ENOENT: continue @@ -571,7 +643,7 @@ def git_get_keywords(versionfile_abs): mo = re.search(r'=\s*"(.*)"', line) if mo: keywords["date"] = mo.group(1) - except EnvironmentError: + except OSError: pass return keywords @@ -652,8 +724,15 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): if sys.platform == "win32": GITS = ["git.cmd", "git.exe"] + # GIT_DIR can interfere with correct operation of Versioneer. + # It may be intended to be passed to the Versioneer-versioned project, + # but that should not change where we get our version from. + env = os.environ.copy() + env.pop("GIT_DIR", None) + runner = functools.partial(runner, env=env) + _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, - hide_stderr=True) + hide_stderr=not verbose) if rc != 0: if verbose: print("Directory %%s not under git control" %% root) @@ -661,10 +740,10 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = runner(GITS, ["describe", "--tags", "--dirty", - "--always", "--long", - "--match", "%%s*" %% tag_prefix], - cwd=root) + describe_out, rc = runner(GITS, [ + "describe", "--tags", "--dirty", "--always", "--long", + "--match", f"{tag_prefix}[[:digit:]]*" + ], cwd=root) # --long was added in git-1.5.5 if describe_out is None: raise NotThisMethod("'git describe' failed") @@ -728,7 +807,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): # TAG-NUM-gHEX mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) if not mo: - # unparseable. Maybe git-describe is misbehaving? + # unparsable. Maybe git-describe is misbehaving? pieces["error"] = ("unable to parse git-describe output: '%%s'" %% describe_out) return pieces @@ -753,8 +832,8 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): else: # HEX: no tags pieces["closest-tag"] = None - count_out, rc = runner(GITS, ["rev-list", "HEAD", "--count"], cwd=root) - pieces["distance"] = int(count_out) # total number of commits + out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) + pieces["distance"] = len(out.split()) # total number of commits # commit date: see ISO-8601 comment in git_versions_from_keywords() date = runner(GITS, ["show", "-s", "--format=%%ci", "HEAD"], cwd=root)[0].strip() @@ -828,16 +907,34 @@ def render_pep440_branch(pieces): return rendered +def pep440_split_post(ver): + """Split pep440 version string at the post-release segment. + + Returns the release segments before the post-release and the + post-release version number (or -1 if no post-release segment is present). + """ + vc = str.split(ver, ".post") + return vc[0], int(vc[1] or 0) if len(vc) == 2 else None + + def render_pep440_pre(pieces): - """TAG[.post0.devDISTANCE] -- No -dirty. + """TAG[.postN.devDISTANCE] -- No -dirty. Exceptions: 1: no tags. 0.post0.devDISTANCE """ if pieces["closest-tag"]: - rendered = pieces["closest-tag"] if pieces["distance"]: - rendered += ".post0.dev%%d" %% pieces["distance"] + # update the post release segment + tag_version, post_version = pep440_split_post(pieces["closest-tag"]) + rendered = tag_version + if post_version is not None: + rendered += ".post%%d.dev%%d" %% (post_version + 1, pieces["distance"]) + else: + rendered += ".post0.dev%%d" %% (pieces["distance"]) + else: + # no commits, use the tag as the version + rendered = pieces["closest-tag"] else: # exception #1 rendered = "0.post0.dev%%d" %% pieces["distance"] @@ -1156,7 +1253,14 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): if sys.platform == "win32": GITS = ["git.cmd", "git.exe"] - _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=True) + # GIT_DIR can interfere with correct operation of Versioneer. + # It may be intended to be passed to the Versioneer-versioned project, + # but that should not change where we get our version from. + env = os.environ.copy() + env.pop("GIT_DIR", None) + runner = functools.partial(runner, env=env) + + _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=not verbose) if rc != 0: if verbose: print("Directory %s not under git control" % root) @@ -1173,7 +1277,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): "--always", "--long", "--match", - "%s*" % tag_prefix, + f"{tag_prefix}[[:digit:]]*", ], cwd=root, ) @@ -1239,7 +1343,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): # TAG-NUM-gHEX mo = re.search(r"^(.+)-(\d+)-g([0-9a-f]+)$", git_describe) if not mo: - # unparseable. Maybe git-describe is misbehaving? + # unparsable. Maybe git-describe is misbehaving? pieces["error"] = "unable to parse git-describe output: '%s'" % describe_out return pieces @@ -1250,8 +1354,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): fmt = "tag '%s' doesn't start with prefix '%s'" print(fmt % (full_tag, tag_prefix)) pieces["error"] = "tag '{}' doesn't start with prefix '{}'".format( - full_tag, - tag_prefix, + full_tag, tag_prefix ) return pieces pieces["closest-tag"] = full_tag[len(tag_prefix) :] @@ -1265,8 +1368,8 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): else: # HEX: no tags pieces["closest-tag"] = None - count_out, rc = runner(GITS, ["rev-list", "HEAD", "--count"], cwd=root) - pieces["distance"] = int(count_out) # total number of commits + out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) + pieces["distance"] = len(out.split()) # total number of commits # commit date: see ISO-8601 comment in git_versions_from_keywords() date = runner(GITS, ["show", "-s", "--format=%ci", "HEAD"], cwd=root)[0].strip() @@ -1278,7 +1381,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): return pieces -def do_vcs_install(manifest_in, versionfile_source, ipy): +def do_vcs_install(versionfile_source, ipy): """Git-specific installation logic for Versioneer. For Git, this means creating/changing .gitattributes to mark _version.py @@ -1287,17 +1390,18 @@ def do_vcs_install(manifest_in, versionfile_source, ipy): GITS = ["git"] if sys.platform == "win32": GITS = ["git.cmd", "git.exe"] - files = [manifest_in, versionfile_source] + files = [versionfile_source] if ipy: files.append(ipy) - try: - my_path = __file__ - if my_path.endswith(".pyc") or my_path.endswith(".pyo"): - my_path = os.path.splitext(my_path)[0] + ".py" - versioneer_file = os.path.relpath(my_path) - except NameError: - versioneer_file = "versioneer.py" - files.append(versioneer_file) + if "VERSIONEER_PEP518" not in globals(): + try: + my_path = __file__ + if my_path.endswith((".pyc", ".pyo")): + my_path = os.path.splitext(my_path)[0] + ".py" + versioneer_file = os.path.relpath(my_path) + except NameError: + versioneer_file = "versioneer.py" + files.append(versioneer_file) present = False try: with open(".gitattributes") as fobj: @@ -1346,7 +1450,7 @@ def versions_from_parentdir(parentdir_prefix, root, verbose): SHORT_VERSION_PY = """ -# This file was generated by 'versioneer.py' (0.20) from +# This file was generated by 'versioneer.py' (0.28) from # revision-control system data, or from the parent directory name of an # unpacked source archive. Distribution tarballs contain a pre-generated copy # of this file. @@ -1448,16 +1552,34 @@ def render_pep440_branch(pieces): return rendered +def pep440_split_post(ver): + """Split pep440 version string at the post-release segment. + + Returns the release segments before the post-release and the + post-release version number (or -1 if no post-release segment is present). + """ + vc = str.split(ver, ".post") + return vc[0], int(vc[1] or 0) if len(vc) == 2 else None + + def render_pep440_pre(pieces): - """TAG[.post0.devDISTANCE] -- No -dirty. + """TAG[.postN.devDISTANCE] -- No -dirty. Exceptions: 1: no tags. 0.post0.devDISTANCE """ if pieces["closest-tag"]: - rendered = pieces["closest-tag"] if pieces["distance"]: - rendered += ".post0.dev%d" % pieces["distance"] + # update the post release segment + tag_version, post_version = pep440_split_post(pieces["closest-tag"]) + rendered = tag_version + if post_version is not None: + rendered += ".post%d.dev%d" % (post_version + 1, pieces["distance"]) + else: + rendered += ".post0.dev%d" % (pieces["distance"]) + else: + # no commits, use the tag as the version + rendered = pieces["closest-tag"] else: # exception #1 rendered = "0.post0.dev%d" % pieces["distance"] @@ -1670,7 +1792,7 @@ def get_versions(verbose=False): try: ver = versions_from_file(versionfile_abs) if verbose: - print("got version from file {} {}".format(versionfile_abs, ver)) + print(f"got version from file {versionfile_abs} {ver}") return ver except NotThisMethod: pass @@ -1713,7 +1835,7 @@ def get_version(): def get_cmdclass(cmdclass=None): - """Get the custom setuptools/distutils subclasses used by Versioneer. + """Get the custom setuptools subclasses used by Versioneer. If the package uses a different cmdclass (e.g. one from numpy), it should be provide as an argument. @@ -1735,8 +1857,8 @@ def get_cmdclass(cmdclass=None): cmds = {} if cmdclass is None else cmdclass.copy() - # we add "version" to both distutils and setuptools - from distutils.core import Command + # we add "version" to setuptools + from setuptools import Command class cmd_version(Command): description = "report generated version string" @@ -1760,7 +1882,7 @@ def run(self): cmds["version"] = cmd_version - # we override "build_py" in both distutils and setuptools + # we override "build_py" in setuptools # # most invocation pathways end up running build_py: # distutils/build -> build_py @@ -1775,13 +1897,14 @@ def run(self): # then does setup.py bdist_wheel, or sometimes setup.py install # setup.py egg_info -> ? + # pip install -e . and setuptool/editable_wheel will invoke build_py + # but the build_py command is not expected to copy any files. + # we override different "build_py" commands for both environments if "build_py" in cmds: _build_py = cmds["build_py"] - elif "setuptools" in sys.modules: - from setuptools.command.build_py import build_py as _build_py else: - from distutils.command.build_py import build_py as _build_py + from setuptools.command.build_py import build_py as _build_py class cmd_build_py(_build_py): def run(self): @@ -1789,6 +1912,10 @@ def run(self): cfg = get_config_from_root(root) versions = get_versions() _build_py.run(self) + if getattr(self, "editable_mode", False): + # During editable installs `.py` and data files are + # not copied to build_lib + return # now locate _version.py in the new build/ directory and replace # it with an updated value if cfg.versionfile_build: @@ -1800,10 +1927,8 @@ def run(self): if "build_ext" in cmds: _build_ext = cmds["build_ext"] - elif "setuptools" in sys.modules: - from setuptools.command.build_ext import build_ext as _build_ext else: - from distutils.command.build_ext import build_ext as _build_ext + from setuptools.command.build_ext import build_ext as _build_ext class cmd_build_ext(_build_ext): def run(self): @@ -1819,7 +1944,16 @@ def run(self): return # now locate _version.py in the new build/ directory and replace # it with an updated value + if not cfg.versionfile_build: + return target_versionfile = os.path.join(self.build_lib, cfg.versionfile_build) + if not os.path.exists(target_versionfile): + print( + f"Warning: {target_versionfile} does not exist, skipping " + "version update. This can happen if you are running build_ext " + "without first running build_py." + ) + return print("UPDATING %s" % target_versionfile) write_to_version_file(target_versionfile, versions) @@ -1863,7 +1997,10 @@ def run(self): del cmds["build_py"] if "py2exe" in sys.modules: # py2exe enabled? - from py2exe.distutils_buildexe import py2exe as _py2exe + try: + from py2exe.setuptools_buildexe import py2exe as _py2exe + except ImportError: + from py2exe.distutils_buildexe import py2exe as _py2exe class cmd_py2exe(_py2exe): def run(self): @@ -1891,18 +2028,54 @@ def run(self): cmds["py2exe"] = cmd_py2exe + # sdist farms its file list building out to egg_info + if "egg_info" in cmds: + _egg_info = cmds["egg_info"] + else: + from setuptools.command.egg_info import egg_info as _egg_info + + class cmd_egg_info(_egg_info): + def find_sources(self): + # egg_info.find_sources builds the manifest list and writes it + # in one shot + super().find_sources() + + # Modify the filelist and normalize it + root = get_root() + cfg = get_config_from_root(root) + self.filelist.append("versioneer.py") + if cfg.versionfile_source: + # There are rare cases where versionfile_source might not be + # included by default, so we must be explicit + self.filelist.append(cfg.versionfile_source) + self.filelist.sort() + self.filelist.remove_duplicates() + + # The write method is hidden in the manifest_maker instance that + # generated the filelist and was thrown away + # We will instead replicate their final normalization (to unicode, + # and POSIX-style paths) + from setuptools import unicode_utils + + normalized = [ + unicode_utils.filesys_decode(f).replace(os.sep, "/") for f in self.filelist.files + ] + + manifest_filename = os.path.join(self.egg_info, "SOURCES.txt") + with open(manifest_filename, "w") as fobj: + fobj.write("\n".join(normalized)) + + cmds["egg_info"] = cmd_egg_info + # we override different "sdist" commands for both environments if "sdist" in cmds: _sdist = cmds["sdist"] - elif "setuptools" in sys.modules: - from setuptools.command.sdist import sdist as _sdist else: - from distutils.command.sdist import sdist as _sdist + from setuptools.command.sdist import sdist as _sdist class cmd_sdist(_sdist): def run(self): versions = get_versions() - # pylint:disable=attribute-defined-outside-init # noqa self._versioneer_generated_versions = versions # unless we update this, the command will keep using the old # version @@ -1980,7 +2153,7 @@ def do_setup(): try: cfg = get_config_from_root(root) except (OSError, configparser.NoSectionError, configparser.NoOptionError) as e: - if isinstance(e, (EnvironmentError, configparser.NoSectionError)): + if isinstance(e, (OSError, configparser.NoSectionError)): print("Adding sample versioneer config to setup.cfg", file=sys.stderr) with open(os.path.join(root, "setup.cfg"), "a") as f: f.write(SAMPLE_CONFIG) @@ -2024,41 +2197,10 @@ def do_setup(): print(" %s doesn't exist, ok" % ipy) ipy = None - # Make sure both the top-level "versioneer.py" and versionfile_source - # (PKG/_version.py, used by runtime code) are in MANIFEST.in, so - # they'll be copied into source distributions. Pip won't be able to - # install the package without this. - manifest_in = os.path.join(root, "MANIFEST.in") - simple_includes = set() - try: - with open(manifest_in) as f: - for line in f: - if line.startswith("include "): - for include in line.split()[1:]: - simple_includes.add(include) - except OSError: - pass - # That doesn't cover everything MANIFEST.in can do - # (http://docs.python.org/2/distutils/sourcedist.html#commands), so - # it might give some false negatives. Appending redundant 'include' - # lines is safe, though. - if "versioneer.py" not in simple_includes: - print(" appending 'versioneer.py' to MANIFEST.in") - with open(manifest_in, "a") as f: - f.write("include versioneer.py\n") - else: - print(" 'versioneer.py' already in MANIFEST.in") - if cfg.versionfile_source not in simple_includes: - print(" appending versionfile_source ('%s') to MANIFEST.in" % cfg.versionfile_source) - with open(manifest_in, "a") as f: - f.write("include %s\n" % cfg.versionfile_source) - else: - print(" versionfile_source already in MANIFEST.in") - # Make VCS-specific changes. For git, this means creating/changing # .gitattributes to mark _version.py for export-subst keyword # substitution. - do_vcs_install(manifest_in, cfg.versionfile_source, ipy) + do_vcs_install(cfg.versionfile_source, ipy) return 0 @@ -2099,10 +2241,14 @@ def scan_setup_py(): return errors +def setup_command(): + """Set up Versioneer and exit with appropriate error code.""" + errors = do_setup() + errors += scan_setup_py() + sys.exit(1 if errors else 0) + + if __name__ == "__main__": cmd = sys.argv[1] if cmd == "setup": - errors = do_setup() - errors += scan_setup_py() - if errors: - sys.exit(1) + setup_command() From b9ec9dabf725e719034ac52ec1bccc8e7ec0460c Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:26:06 -0400 Subject: [PATCH 2/9] use python 3.8 in CI --- .github/workflows/pypi-publish.yml | 2 +- .github/workflows/testing.yml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/.github/workflows/pypi-publish.yml b/.github/workflows/pypi-publish.yml index 04f9540..dca4117 100644 --- a/.github/workflows/pypi-publish.yml +++ b/.github/workflows/pypi-publish.yml @@ -18,7 +18,7 @@ jobs: - name: Set up Python uses: actions/setup-python@v4 with: - python-version: '3.7' + python-version: '3.8' - name: Install dependencies run: | python -m pip install --upgrade pip diff --git a/.github/workflows/testing.yml b/.github/workflows/testing.yml index 87b4780..2aca97e 100644 --- a/.github/workflows/testing.yml +++ b/.github/workflows/testing.yml @@ -37,7 +37,7 @@ jobs: fail-fast: false matrix: os: [ubuntu-latest, macos-latest] - python-version: ['3.7', '3.8', '3.9', '3.10', '3.11'] + python-version: ['3.8', '3.9', '3.10', '3.11'] name: ${{ matrix.os }} with Python ${{ matrix.python-version }} defaults: run: From 7fc60d2bdceb7a16728cb84343ca171ee7f11384 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:28:41 -0400 Subject: [PATCH 3/9] allow installs [tests] --- pyproject.toml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/pyproject.toml b/pyproject.toml index fa6fb06..a79d966 100644 --- a/pyproject.toml +++ b/pyproject.toml @@ -52,6 +52,7 @@ doc = [ "sphinx>=2.2", "sphinx-rtd-theme", ] +docs=["pybids_reports[doc]"] test = [ "codecov", "flake8-black", @@ -61,7 +62,7 @@ test = [ "pytest-cov", 'rich' ] -docs=["pybids_reports[doc]"] +tests=["pybids_reports[test]"] ci_tests = [ "pybids_reports[test]", "pytest-xdist" From 58b7ea3d3d3195f37f490245f2e044ea7ec7360e Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:33:37 -0400 Subject: [PATCH 4/9] try fix --- bids/ext/reports/tests/test_templates.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/bids/ext/reports/tests/test_templates.py b/bids/ext/reports/tests/test_templates.py index 12fa852..c7cf704 100644 --- a/bids/ext/reports/tests/test_templates.py +++ b/bids/ext/reports/tests/test_templates.py @@ -7,7 +7,7 @@ def test_pet(): - with (open(Path(__file__).parent.joinpath("data", "sub-01_ses-01_pet.json")) as f): + with (open(Path(__file__).parent / "data" / "sub-01_ses-01_pet.json") as f): metadata = json.load(f) desc_data = {**parsing.device_info(metadata), **metadata} From 6aaf1e910491bcd5208bcac5597e07647dd8f268 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:34:48 -0400 Subject: [PATCH 5/9] test in non editable mode --- .github/workflows/testing.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/testing.yml b/.github/workflows/testing.yml index 2aca97e..f3d9196 100644 --- a/.github/workflows/testing.yml +++ b/.github/workflows/testing.yml @@ -53,7 +53,7 @@ jobs: run: python -c "import sys; print(sys.version)" - name: Install pybids-reports shell: bash {0} - run: pip install -e .[tests] + run: pip install .[tests] - name: Run tests shell: bash {0} run: python -m pytest --pyargs bids/ext/reports --cov=bids/ext/reports From 66ececedd419bd53a304082d93b04c7aafd71540 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:43:46 -0400 Subject: [PATCH 6/9] checkout submodules --- .github/workflows/testing.yml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/.github/workflows/testing.yml b/.github/workflows/testing.yml index f3d9196..a3882d5 100644 --- a/.github/workflows/testing.yml +++ b/.github/workflows/testing.yml @@ -20,9 +20,6 @@ jobs: outputs: skip: ${{ steps.result_step.outputs.ci-skip }} steps: - - uses: actions/checkout@v3 - with: - fetch-depth: 0 - id: result_step uses: mstachniuk/ci-skip@master with: @@ -32,18 +29,20 @@ jobs: run_tests: needs: check_skip if: ${{ needs.check_skip.outputs.skip == 'false' }} - runs-on: ${{ matrix.os }} strategy: fail-fast: false matrix: os: [ubuntu-latest, macos-latest] python-version: ['3.8', '3.9', '3.10', '3.11'] + runs-on: ${{ matrix.os }} name: ${{ matrix.os }} with Python ${{ matrix.python-version }} defaults: run: shell: bash steps: - uses: actions/checkout@v3 + with: + submodules: recursive - name: Set up python uses: actions/setup-python@v4 with: From 871188214408e077b87491d6ebe87405b548ee56 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:47:12 -0400 Subject: [PATCH 7/9] update submodule --- bids/ext/reports/templates | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/bids/ext/reports/templates b/bids/ext/reports/templates index 3571c22..d9f083d 160000 --- a/bids/ext/reports/templates +++ b/bids/ext/reports/templates @@ -1 +1 @@ -Subproject commit 3571c22b4ee7b08fb6cbe606eb8faf6a79130d6b +Subproject commit d9f083df5a0df48cb64c105f99f201bae1a83818 From 84c7ef044d8219386220b7834ed8a13a94a7fd68 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 22 May 2023 23:57:45 -0400 Subject: [PATCH 8/9] fix syntax --- bids/ext/reports/tests/test_templates.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/bids/ext/reports/tests/test_templates.py b/bids/ext/reports/tests/test_templates.py index c7cf704..b73ecac 100644 --- a/bids/ext/reports/tests/test_templates.py +++ b/bids/ext/reports/tests/test_templates.py @@ -7,7 +7,7 @@ def test_pet(): - with (open(Path(__file__).parent / "data" / "sub-01_ses-01_pet.json") as f): + with open(Path(__file__).parent / "data" / "sub-01_ses-01_pet.json") as f: metadata = json.load(f) desc_data = {**parsing.device_info(metadata), **metadata} From 5a4015f1bde3a9a738ecfbf6c3dcbdca385fbc60 Mon Sep 17 00:00:00 2001 From: Remi Gau Date: Mon, 29 May 2023 18:09:45 -0400 Subject: [PATCH 9/9] switch to hatch --- .gitignore | 3 + bids/ext/reports/__init__.py | 6 +- bids/ext/reports/_version.py | 692 ----------- pyproject.toml | 25 +- setup.cfg | 13 - setup.py | 8 - versioneer.py | 2254 ---------------------------------- 7 files changed, 16 insertions(+), 2985 deletions(-) delete mode 100644 bids/ext/reports/_version.py delete mode 100644 setup.cfg delete mode 100644 setup.py delete mode 100644 versioneer.py diff --git a/.gitignore b/.gitignore index 0d1e7f6..72f92e3 100644 --- a/.gitignore +++ b/.gitignore @@ -1,3 +1,6 @@ +# do not track _version.py for hatch +bids/ext/reports/_version.py + tmp.py # Byte-compiled / optimized / DLL files diff --git a/bids/ext/reports/__init__.py b/bids/ext/reports/__init__.py index aa3a306..89117d0 100644 --- a/bids/ext/reports/__init__.py +++ b/bids/ext/reports/__init__.py @@ -14,8 +14,4 @@ del due, Doi -__version__ = _version.get_versions()["version"] - -from . import _version - -__version__ = _version.get_versions()["version"] +__version__ = _version.__version__ diff --git a/bids/ext/reports/_version.py b/bids/ext/reports/_version.py deleted file mode 100644 index 3e9c8b1..0000000 --- a/bids/ext/reports/_version.py +++ /dev/null @@ -1,692 +0,0 @@ -# This file helps to compute a version number in source trees obtained from -# git-archive tarball (such as those provided by githubs download-from-tag -# feature). Distribution tarballs (built by setup.py sdist) and build -# directories (produced by setup.py build) will contain a much shorter file -# that just contains the computed version number. - -# This file is released into the public domain. -# Generated by versioneer-0.28 -# https://github.com/python-versioneer/python-versioneer - -"""Git implementation of _version.py.""" - -import errno -import os -import re -import subprocess -import sys -from typing import Callable, Dict -import functools - - -def get_keywords(): - """Get the keywords needed to look up the version information.""" - # these strings will be replaced by git during git-archive. - # setup.py/versioneer.py will grep for the variable names, so they must - # each be defined on a line of their own. _version.py will just call - # get_keywords(). - git_refnames = "$Format:%d$" - git_full = "$Format:%H$" - git_date = "$Format:%ci$" - keywords = {"refnames": git_refnames, "full": git_full, "date": git_date} - return keywords - - -class VersioneerConfig: - """Container for Versioneer configuration parameters.""" - - -def get_config(): - """Create, populate and return the VersioneerConfig() object.""" - # these strings are filled in when 'setup.py versioneer' creates - # _version.py - cfg = VersioneerConfig() - cfg.VCS = "git" - cfg.style = "pep440" - cfg.tag_prefix = "" - cfg.parentdir_prefix = "None" - cfg.versionfile_source = "bids/ext/reports/_version.py" - cfg.verbose = False - return cfg - - -class NotThisMethod(Exception): - """Exception raised if a method is not valid for the current scenario.""" - - -LONG_VERSION_PY: Dict[str, str] = {} -HANDLERS: Dict[str, Dict[str, Callable]] = {} - - -def register_vcs_handler(vcs, method): # decorator - """Create decorator to mark a method as the handler of a VCS.""" - - def decorate(f): - """Store f in HANDLERS[vcs][method].""" - if vcs not in HANDLERS: - HANDLERS[vcs] = {} - HANDLERS[vcs][method] = f - return f - - return decorate - - -def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env=None): - """Call the given command(s).""" - assert isinstance(commands, list) - process = None - - popen_kwargs = {} - if sys.platform == "win32": - # This hides the console window if pythonw.exe is used - startupinfo = subprocess.STARTUPINFO() - startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW - popen_kwargs["startupinfo"] = startupinfo - - for command in commands: - try: - dispcmd = str([command] + args) - # remember shell=False, so use git.cmd on windows, not just git - process = subprocess.Popen( - [command] + args, - cwd=cwd, - env=env, - stdout=subprocess.PIPE, - stderr=(subprocess.PIPE if hide_stderr else None), - **popen_kwargs, - ) - break - except OSError: - e = sys.exc_info()[1] - if e.errno == errno.ENOENT: - continue - if verbose: - print("unable to run %s" % dispcmd) - print(e) - return None, None - else: - if verbose: - print(f"unable to find command, tried {commands}") - return None, None - stdout = process.communicate()[0].strip().decode() - if process.returncode != 0: - if verbose: - print("unable to run %s (error)" % dispcmd) - print("stdout was %s" % stdout) - return None, process.returncode - return stdout, process.returncode - - -def versions_from_parentdir(parentdir_prefix, root, verbose): - """Try to determine the version from the parent directory name. - - Source tarballs conventionally unpack into a directory that includes both - the project name and a version string. We will also support searching up - two directory levels for an appropriately named parent directory - """ - rootdirs = [] - - for _ in range(3): - dirname = os.path.basename(root) - if dirname.startswith(parentdir_prefix): - return { - "version": dirname[len(parentdir_prefix) :], - "full-revisionid": None, - "dirty": False, - "error": None, - "date": None, - } - rootdirs.append(root) - root = os.path.dirname(root) # up a level - - if verbose: - print( - "Tried directories %s but none started with prefix %s" - % (str(rootdirs), parentdir_prefix) - ) - raise NotThisMethod("rootdir doesn't start with parentdir_prefix") - - -@register_vcs_handler("git", "get_keywords") -def git_get_keywords(versionfile_abs): - """Extract version information from the given file.""" - # the code embedded in _version.py can just fetch the value of these - # keywords. When used from setup.py, we don't want to import _version.py, - # so we do it with a regexp instead. This function is not used from - # _version.py. - keywords = {} - try: - with open(versionfile_abs) as fobj: - for line in fobj: - if line.strip().startswith("git_refnames ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["refnames"] = mo.group(1) - if line.strip().startswith("git_full ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["full"] = mo.group(1) - if line.strip().startswith("git_date ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["date"] = mo.group(1) - except OSError: - pass - return keywords - - -@register_vcs_handler("git", "keywords") -def git_versions_from_keywords(keywords, tag_prefix, verbose): - """Get version information from git keywords.""" - if "refnames" not in keywords: - raise NotThisMethod("Short version file found") - date = keywords.get("date") - if date is not None: - # Use only the last line. Previous lines may contain GPG signature - # information. - date = date.splitlines()[-1] - - # git-2.2.0 added "%cI", which expands to an ISO-8601 -compliant - # datestamp. However we prefer "%ci" (which expands to an "ISO-8601 - # -like" string, which we must then edit to make compliant), because - # it's been around since git-1.5.3, and it's too difficult to - # discover which version we're using, or to work around using an - # older one. - date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - refnames = keywords["refnames"].strip() - if refnames.startswith("$Format"): - if verbose: - print("keywords are unexpanded, not using") - raise NotThisMethod("unexpanded keywords, not a git-archive tarball") - refs = {r.strip() for r in refnames.strip("()").split(",")} - # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of - # just "foo-1.0". If we see a "tag: " prefix, prefer those. - TAG = "tag: " - tags = {r[len(TAG) :] for r in refs if r.startswith(TAG)} - if not tags: - # Either we're using git < 1.8.3, or there really are no tags. We use - # a heuristic: assume all version tags have a digit. The old git %d - # expansion behaves like git log --decorate=short and strips out the - # refs/heads/ and refs/tags/ prefixes that would let us distinguish - # between branches and tags. By ignoring refnames without digits, we - # filter out many common branch names like "release" and - # "stabilization", as well as "HEAD" and "master". - tags = {r for r in refs if re.search(r"\d", r)} - if verbose: - print("discarding '%s', no digits" % ",".join(refs - tags)) - if verbose: - print("likely tags: %s" % ",".join(sorted(tags))) - for ref in sorted(tags): - # sorting will prefer e.g. "2.0" over "2.0rc1" - if ref.startswith(tag_prefix): - r = ref[len(tag_prefix) :] - # Filter out refs that exactly match prefix or that don't start - # with a number once the prefix is stripped (mostly a concern - # when prefix is '') - if not re.match(r"\d", r): - continue - if verbose: - print("picking %s" % r) - return { - "version": r, - "full-revisionid": keywords["full"].strip(), - "dirty": False, - "error": None, - "date": date, - } - # no suitable tags, so version is "0+unknown", but full hex is still there - if verbose: - print("no suitable tags, using unknown + full revision id") - return { - "version": "0+unknown", - "full-revisionid": keywords["full"].strip(), - "dirty": False, - "error": "no suitable tags", - "date": None, - } - - -@register_vcs_handler("git", "pieces_from_vcs") -def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): - """Get version from 'git describe' in the root of the source tree. - - This only gets called if the git-archive 'subst' keywords were *not* - expanded, and _version.py hasn't already been rewritten with a short - version string, meaning we're inside a checked out source tree. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - - # GIT_DIR can interfere with correct operation of Versioneer. - # It may be intended to be passed to the Versioneer-versioned project, - # but that should not change where we get our version from. - env = os.environ.copy() - env.pop("GIT_DIR", None) - runner = functools.partial(runner, env=env) - - _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=not verbose) - if rc != 0: - if verbose: - print("Directory %s not under git control" % root) - raise NotThisMethod("'git rev-parse --git-dir' returned error") - - # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] - # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = runner( - GITS, - [ - "describe", - "--tags", - "--dirty", - "--always", - "--long", - "--match", - f"{tag_prefix}[[:digit:]]*", - ], - cwd=root, - ) - # --long was added in git-1.5.5 - if describe_out is None: - raise NotThisMethod("'git describe' failed") - describe_out = describe_out.strip() - full_out, rc = runner(GITS, ["rev-parse", "HEAD"], cwd=root) - if full_out is None: - raise NotThisMethod("'git rev-parse' failed") - full_out = full_out.strip() - - pieces = {} - pieces["long"] = full_out - pieces["short"] = full_out[:7] # maybe improved later - pieces["error"] = None - - branch_name, rc = runner(GITS, ["rev-parse", "--abbrev-ref", "HEAD"], cwd=root) - # --abbrev-ref was added in git-1.6.3 - if rc != 0 or branch_name is None: - raise NotThisMethod("'git rev-parse --abbrev-ref' returned error") - branch_name = branch_name.strip() - - if branch_name == "HEAD": - # If we aren't exactly on a branch, pick a branch which represents - # the current commit. If all else fails, we are on a branchless - # commit. - branches, rc = runner(GITS, ["branch", "--contains"], cwd=root) - # --contains was added in git-1.5.4 - if rc != 0 or branches is None: - raise NotThisMethod("'git branch --contains' returned error") - branches = branches.split("\n") - - # Remove the first line if we're running detached - if "(" in branches[0]: - branches.pop(0) - - # Strip off the leading "* " from the list of branches. - branches = [branch[2:] for branch in branches] - if "master" in branches: - branch_name = "master" - elif not branches: - branch_name = None - else: - # Pick the first branch that is returned. Good or bad. - branch_name = branches[0] - - pieces["branch"] = branch_name - - # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] - # TAG might have hyphens. - git_describe = describe_out - - # look for -dirty suffix - dirty = git_describe.endswith("-dirty") - pieces["dirty"] = dirty - if dirty: - git_describe = git_describe[: git_describe.rindex("-dirty")] - - # now we have TAG-NUM-gHEX or HEX - - if "-" in git_describe: - # TAG-NUM-gHEX - mo = re.search(r"^(.+)-(\d+)-g([0-9a-f]+)$", git_describe) - if not mo: - # unparsable. Maybe git-describe is misbehaving? - pieces["error"] = "unable to parse git-describe output: '%s'" % describe_out - return pieces - - # tag - full_tag = mo.group(1) - if not full_tag.startswith(tag_prefix): - if verbose: - fmt = "tag '%s' doesn't start with prefix '%s'" - print(fmt % (full_tag, tag_prefix)) - pieces["error"] = "tag '{}' doesn't start with prefix '{}'".format( - full_tag, tag_prefix - ) - return pieces - pieces["closest-tag"] = full_tag[len(tag_prefix) :] - - # distance: number of commits since tag - pieces["distance"] = int(mo.group(2)) - - # commit: short hex revision ID - pieces["short"] = mo.group(3) - - else: - # HEX: no tags - pieces["closest-tag"] = None - out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) - pieces["distance"] = len(out.split()) # total number of commits - - # commit date: see ISO-8601 comment in git_versions_from_keywords() - date = runner(GITS, ["show", "-s", "--format=%ci", "HEAD"], cwd=root)[0].strip() - # Use only the last line. Previous lines may contain GPG signature - # information. - date = date.splitlines()[-1] - pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - - return pieces - - -def plus_or_dot(pieces): - """Return a + if we don't already have one, else return a .""" - if "+" in pieces.get("closest-tag", ""): - return "." - return "+" - - -def render_pep440(pieces): - """Build up version string, with post-release "local version identifier". - - Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you - get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty - - Exceptions: - 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += plus_or_dot(pieces) - rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0+untagged.%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_branch(pieces): - """TAG[[.dev0]+DISTANCE.gHEX[.dirty]] . - - The ".dev0" means not master branch. Note that .dev0 sorts backwards - (a feature branch will appear "older" than the master branch). - - Exceptions: - 1: no tags. 0[.dev0]+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0" - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += "+untagged.%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def pep440_split_post(ver): - """Split pep440 version string at the post-release segment. - - Returns the release segments before the post-release and the - post-release version number (or -1 if no post-release segment is present). - """ - vc = str.split(ver, ".post") - return vc[0], int(vc[1] or 0) if len(vc) == 2 else None - - -def render_pep440_pre(pieces): - """TAG[.postN.devDISTANCE] -- No -dirty. - - Exceptions: - 1: no tags. 0.post0.devDISTANCE - """ - if pieces["closest-tag"]: - if pieces["distance"]: - # update the post release segment - tag_version, post_version = pep440_split_post(pieces["closest-tag"]) - rendered = tag_version - if post_version is not None: - rendered += ".post%d.dev%d" % (post_version + 1, pieces["distance"]) - else: - rendered += ".post0.dev%d" % (pieces["distance"]) - else: - # no commits, use the tag as the version - rendered = pieces["closest-tag"] - else: - # exception #1 - rendered = "0.post0.dev%d" % pieces["distance"] - return rendered - - -def render_pep440_post(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX] . - - The ".dev0" means dirty. Note that .dev0 sorts backwards - (a dirty tree will appear "older" than the corresponding clean one), - but you shouldn't be releasing software with -dirty anyways. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%s" % pieces["short"] - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += "+g%s" % pieces["short"] - return rendered - - -def render_pep440_post_branch(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX[.dirty]] . - - The ".dev0" means not master branch. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0]+gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%s" % pieces["short"] - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += "+g%s" % pieces["short"] - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_old(pieces): - """TAG[.postDISTANCE[.dev0]] . - - The ".dev0" means dirty. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - return rendered - - -def render_git_describe(pieces): - """TAG[-DISTANCE-gHEX][-dirty]. - - Like 'git describe --tags --dirty --always'. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render_git_describe_long(pieces): - """TAG-DISTANCE-gHEX[-dirty]. - - Like 'git describe --tags --dirty --always -long'. - The distance/hash is unconditional. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render(pieces, style): - """Render the given version pieces into the requested style.""" - if pieces["error"]: - return { - "version": "unknown", - "full-revisionid": pieces.get("long"), - "dirty": None, - "error": pieces["error"], - "date": None, - } - - if not style or style == "default": - style = "pep440" # the default - - if style == "pep440": - rendered = render_pep440(pieces) - elif style == "pep440-branch": - rendered = render_pep440_branch(pieces) - elif style == "pep440-pre": - rendered = render_pep440_pre(pieces) - elif style == "pep440-post": - rendered = render_pep440_post(pieces) - elif style == "pep440-post-branch": - rendered = render_pep440_post_branch(pieces) - elif style == "pep440-old": - rendered = render_pep440_old(pieces) - elif style == "git-describe": - rendered = render_git_describe(pieces) - elif style == "git-describe-long": - rendered = render_git_describe_long(pieces) - else: - raise ValueError("unknown style '%s'" % style) - - return { - "version": rendered, - "full-revisionid": pieces["long"], - "dirty": pieces["dirty"], - "error": None, - "date": pieces.get("date"), - } - - -def get_versions(): - """Get version information or return default if unable to do so.""" - # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have - # __file__, we can work backwards from there to the root. Some - # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which - # case we can only use expanded keywords. - - cfg = get_config() - verbose = cfg.verbose - - try: - return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, verbose) - except NotThisMethod: - pass - - try: - root = os.path.realpath(__file__) - # versionfile_source is the relative path from the top of the source - # tree (where the .git directory might live) to this file. Invert - # this to find the root from __file__. - for _ in cfg.versionfile_source.split("/"): - root = os.path.dirname(root) - except NameError: - return { - "version": "0+unknown", - "full-revisionid": None, - "dirty": None, - "error": "unable to find root of source tree", - "date": None, - } - - try: - pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) - return render(pieces, cfg.style) - except NotThisMethod: - pass - - try: - if cfg.parentdir_prefix: - return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) - except NotThisMethod: - pass - - return { - "version": "0+unknown", - "full-revisionid": None, - "dirty": None, - "error": "unable to compute version", - "date": None, - } diff --git a/pyproject.toml b/pyproject.toml index a79d966..e2dcb06 100644 --- a/pyproject.toml +++ b/pyproject.toml @@ -1,19 +1,19 @@ -[build-system] -requires = ["setuptools", "versioneer[toml]"] -build-backend = "setuptools.build_meta" - # [build-system] -# requires = ["hatchling", "hatch-vcs", "versioneer[toml]"] -# build-backend = "hatchling.build" +# requires = ["setuptools", "versioneer[toml]"] +# build-backend = "setuptools.build_meta" + +[build-system] +requires = ["hatchling", "hatch-vcs"] +build-backend = "hatchling.build" -# [tool.hatch.build.targets.wheel] -# packages = ["bids/ext/reports"] +[tool.hatch.version] +source = "vcs" -# [tool.hatch.version] -# source = "vcs" +[tool.hatch.build.targets.wheel] +packages = ["bids/ext/reports"] -# [tool.hatch.build.hooks.vcs] -# version-file = "bids/ext/reports/_version.py" +[tool.hatch.build.hooks.vcs] +version-file = "bids/ext/reports/_version.py" [project] name = "pybids_reports" @@ -40,7 +40,6 @@ classifiers = [ "Programming Language :: Python :: 3 :: Only", "Topic :: Scientific/Engineering", ] -# Version from setuptools_scm dynamic = ["version"] [project.urls] diff --git a/setup.cfg b/setup.cfg deleted file mode 100644 index 39a1d53..0000000 --- a/setup.cfg +++ /dev/null @@ -1,13 +0,0 @@ -[options] -packages = find_namespace: -include_package_data = False - -[options.packages.find] -include = - bids.ext.EXTENSION - bids.ext.EXTENSION.* - - -[options.package_data] -* = - config/* diff --git a/setup.py b/setup.py deleted file mode 100644 index f01ff7f..0000000 --- a/setup.py +++ /dev/null @@ -1,8 +0,0 @@ -#!/usr/bin/env python -from setuptools import setup -import versioneer - -setup( - version=versioneer.get_version(), - cmdclass=versioneer.get_cmdclass(), -) diff --git a/versioneer.py b/versioneer.py deleted file mode 100644 index 777e4bb..0000000 --- a/versioneer.py +++ /dev/null @@ -1,2254 +0,0 @@ -# Version: 0.28 - -"""The Versioneer - like a rocketeer, but for versions. - -The Versioneer -============== - -* like a rocketeer, but for versions! -* https://github.com/python-versioneer/python-versioneer -* Brian Warner -* License: Public Domain (Unlicense) -* Compatible with: Python 3.7, 3.8, 3.9, 3.10 and pypy3 -* [![Latest Version][pypi-image]][pypi-url] -* [![Build Status][travis-image]][travis-url] - -This is a tool for managing a recorded version number in setuptools-based -python projects. The goal is to remove the tedious and error-prone "update -the embedded version string" step from your release process. Making a new -release should be as easy as recording a new tag in your version-control -system, and maybe making new tarballs. - - -## Quick Install - -Versioneer provides two installation modes. The "classic" vendored mode installs -a copy of versioneer into your repository. The experimental build-time dependency mode -is intended to allow you to skip this step and simplify the process of upgrading. - -### Vendored mode - -* `pip install versioneer` to somewhere in your $PATH - * A [conda-forge recipe](https://github.com/conda-forge/versioneer-feedstock) is - available, so you can also use `conda install -c conda-forge versioneer` -* add a `[tool.versioneer]` section to your `pyproject.toml` or a - `[versioneer]` section to your `setup.cfg` (see [Install](INSTALL.md)) - * Note that you will need to add `tomli; python_version < "3.11"` to your - build-time dependencies if you use `pyproject.toml` -* run `versioneer install --vendor` in your source tree, commit the results -* verify version information with `python setup.py version` - -### Build-time dependency mode - -* `pip install versioneer` to somewhere in your $PATH - * A [conda-forge recipe](https://github.com/conda-forge/versioneer-feedstock) is - available, so you can also use `conda install -c conda-forge versioneer` -* add a `[tool.versioneer]` section to your `pyproject.toml` or a - `[versioneer]` section to your `setup.cfg` (see [Install](INSTALL.md)) -* add `versioneer` (with `[toml]` extra, if configuring in `pyproject.toml`) - to the `requires` key of the `build-system` table in `pyproject.toml`: - ```toml - [build-system] - requires = ["setuptools", "versioneer[toml]"] - build-backend = "setuptools.build_meta" - ``` -* run `versioneer install --no-vendor` in your source tree, commit the results -* verify version information with `python setup.py version` - -## Version Identifiers - -Source trees come from a variety of places: - -* a version-control system checkout (mostly used by developers) -* a nightly tarball, produced by build automation -* a snapshot tarball, produced by a web-based VCS browser, like github's - "tarball from tag" feature -* a release tarball, produced by "setup.py sdist", distributed through PyPI - -Within each source tree, the version identifier (either a string or a number, -this tool is format-agnostic) can come from a variety of places: - -* ask the VCS tool itself, e.g. "git describe" (for checkouts), which knows - about recent "tags" and an absolute revision-id -* the name of the directory into which the tarball was unpacked -* an expanded VCS keyword ($Id$, etc) -* a `_version.py` created by some earlier build step - -For released software, the version identifier is closely related to a VCS -tag. Some projects use tag names that include more than just the version -string (e.g. "myproject-1.2" instead of just "1.2"), in which case the tool -needs to strip the tag prefix to extract the version identifier. For -unreleased software (between tags), the version identifier should provide -enough information to help developers recreate the same tree, while also -giving them an idea of roughly how old the tree is (after version 1.2, before -version 1.3). Many VCS systems can report a description that captures this, -for example `git describe --tags --dirty --always` reports things like -"0.7-1-g574ab98-dirty" to indicate that the checkout is one revision past the -0.7 tag, has a unique revision id of "574ab98", and is "dirty" (it has -uncommitted changes). - -The version identifier is used for multiple purposes: - -* to allow the module to self-identify its version: `myproject.__version__` -* to choose a name and prefix for a 'setup.py sdist' tarball - -## Theory of Operation - -Versioneer works by adding a special `_version.py` file into your source -tree, where your `__init__.py` can import it. This `_version.py` knows how to -dynamically ask the VCS tool for version information at import time. - -`_version.py` also contains `$Revision$` markers, and the installation -process marks `_version.py` to have this marker rewritten with a tag name -during the `git archive` command. As a result, generated tarballs will -contain enough information to get the proper version. - -To allow `setup.py` to compute a version too, a `versioneer.py` is added to -the top level of your source tree, next to `setup.py` and the `setup.cfg` -that configures it. This overrides several distutils/setuptools commands to -compute the version when invoked, and changes `setup.py build` and `setup.py -sdist` to replace `_version.py` with a small static file that contains just -the generated version data. - -## Installation - -See [INSTALL.md](./INSTALL.md) for detailed installation instructions. - -## Version-String Flavors - -Code which uses Versioneer can learn about its version string at runtime by -importing `_version` from your main `__init__.py` file and running the -`get_versions()` function. From the "outside" (e.g. in `setup.py`), you can -import the top-level `versioneer.py` and run `get_versions()`. - -Both functions return a dictionary with different flavors of version -information: - -* `['version']`: A condensed version string, rendered using the selected - style. This is the most commonly used value for the project's version - string. The default "pep440" style yields strings like `0.11`, - `0.11+2.g1076c97`, or `0.11+2.g1076c97.dirty`. See the "Styles" section - below for alternative styles. - -* `['full-revisionid']`: detailed revision identifier. For Git, this is the - full SHA1 commit id, e.g. "1076c978a8d3cfc70f408fe5974aa6c092c949ac". - -* `['date']`: Date and time of the latest `HEAD` commit. For Git, it is the - commit date in ISO 8601 format. This will be None if the date is not - available. - -* `['dirty']`: a boolean, True if the tree has uncommitted changes. Note that - this is only accurate if run in a VCS checkout, otherwise it is likely to - be False or None - -* `['error']`: if the version string could not be computed, this will be set - to a string describing the problem, otherwise it will be None. It may be - useful to throw an exception in setup.py if this is set, to avoid e.g. - creating tarballs with a version string of "unknown". - -Some variants are more useful than others. Including `full-revisionid` in a -bug report should allow developers to reconstruct the exact code being tested -(or indicate the presence of local changes that should be shared with the -developers). `version` is suitable for display in an "about" box or a CLI -`--version` output: it can be easily compared against release notes and lists -of bugs fixed in various releases. - -The installer adds the following text to your `__init__.py` to place a basic -version in `YOURPROJECT.__version__`: - - from ._version import get_versions - __version__ = get_versions()['version'] - del get_versions - -## Styles - -The setup.cfg `style=` configuration controls how the VCS information is -rendered into a version string. - -The default style, "pep440", produces a PEP440-compliant string, equal to the -un-prefixed tag name for actual releases, and containing an additional "local -version" section with more detail for in-between builds. For Git, this is -TAG[+DISTANCE.gHEX[.dirty]] , using information from `git describe --tags ---dirty --always`. For example "0.11+2.g1076c97.dirty" indicates that the -tree is like the "1076c97" commit but has uncommitted changes (".dirty"), and -that this commit is two revisions ("+2") beyond the "0.11" tag. For released -software (exactly equal to a known tag), the identifier will only contain the -stripped tag, e.g. "0.11". - -Other styles are available. See [details.md](details.md) in the Versioneer -source tree for descriptions. - -## Debugging - -Versioneer tries to avoid fatal errors: if something goes wrong, it will tend -to return a version of "0+unknown". To investigate the problem, run `setup.py -version`, which will run the version-lookup code in a verbose mode, and will -display the full contents of `get_versions()` (including the `error` string, -which may help identify what went wrong). - -## Known Limitations - -Some situations are known to cause problems for Versioneer. This details the -most significant ones. More can be found on Github -[issues page](https://github.com/python-versioneer/python-versioneer/issues). - -### Subprojects - -Versioneer has limited support for source trees in which `setup.py` is not in -the root directory (e.g. `setup.py` and `.git/` are *not* siblings). The are -two common reasons why `setup.py` might not be in the root: - -* Source trees which contain multiple subprojects, such as - [Buildbot](https://github.com/buildbot/buildbot), which contains both - "master" and "slave" subprojects, each with their own `setup.py`, - `setup.cfg`, and `tox.ini`. Projects like these produce multiple PyPI - distributions (and upload multiple independently-installable tarballs). -* Source trees whose main purpose is to contain a C library, but which also - provide bindings to Python (and perhaps other languages) in subdirectories. - -Versioneer will look for `.git` in parent directories, and most operations -should get the right version string. However `pip` and `setuptools` have bugs -and implementation details which frequently cause `pip install .` from a -subproject directory to fail to find a correct version string (so it usually -defaults to `0+unknown`). - -`pip install --editable .` should work correctly. `setup.py install` might -work too. - -Pip-8.1.1 is known to have this problem, but hopefully it will get fixed in -some later version. - -[Bug #38](https://github.com/python-versioneer/python-versioneer/issues/38) is tracking -this issue. The discussion in -[PR #61](https://github.com/python-versioneer/python-versioneer/pull/61) describes the -issue from the Versioneer side in more detail. -[pip PR#3176](https://github.com/pypa/pip/pull/3176) and -[pip PR#3615](https://github.com/pypa/pip/pull/3615) contain work to improve -pip to let Versioneer work correctly. - -Versioneer-0.16 and earlier only looked for a `.git` directory next to the -`setup.cfg`, so subprojects were completely unsupported with those releases. - -### Editable installs with setuptools <= 18.5 - -`setup.py develop` and `pip install --editable .` allow you to install a -project into a virtualenv once, then continue editing the source code (and -test) without re-installing after every change. - -"Entry-point scripts" (`setup(entry_points={"console_scripts": ..})`) are a -convenient way to specify executable scripts that should be installed along -with the python package. - -These both work as expected when using modern setuptools. When using -setuptools-18.5 or earlier, however, certain operations will cause -`pkg_resources.DistributionNotFound` errors when running the entrypoint -script, which must be resolved by re-installing the package. This happens -when the install happens with one version, then the egg_info data is -regenerated while a different version is checked out. Many setup.py commands -cause egg_info to be rebuilt (including `sdist`, `wheel`, and installing into -a different virtualenv), so this can be surprising. - -[Bug #83](https://github.com/python-versioneer/python-versioneer/issues/83) describes -this one, but upgrading to a newer version of setuptools should probably -resolve it. - - -## Updating Versioneer - -To upgrade your project to a new release of Versioneer, do the following: - -* install the new Versioneer (`pip install -U versioneer` or equivalent) -* edit `setup.cfg` and `pyproject.toml`, if necessary, - to include any new configuration settings indicated by the release notes. - See [UPGRADING](./UPGRADING.md) for details. -* re-run `versioneer install --[no-]vendor` in your source tree, to replace - `SRC/_version.py` -* commit any changed files - -## Future Directions - -This tool is designed to make it easily extended to other version-control -systems: all VCS-specific components are in separate directories like -src/git/ . The top-level `versioneer.py` script is assembled from these -components by running make-versioneer.py . In the future, make-versioneer.py -will take a VCS name as an argument, and will construct a version of -`versioneer.py` that is specific to the given VCS. It might also take the -configuration arguments that are currently provided manually during -installation by editing setup.py . Alternatively, it might go the other -direction and include code from all supported VCS systems, reducing the -number of intermediate scripts. - -## Similar projects - -* [setuptools_scm](https://github.com/pypa/setuptools_scm/) - a non-vendored build-time - dependency -* [minver](https://github.com/jbweston/miniver) - a lightweight reimplementation of - versioneer -* [versioningit](https://github.com/jwodder/versioningit) - a PEP 518-based setuptools - plugin - -## License - -To make Versioneer easier to embed, all its code is dedicated to the public -domain. The `_version.py` that it creates is also in the public domain. -Specifically, both are released under the "Unlicense", as described in -https://unlicense.org/. - -[pypi-image]: https://img.shields.io/pypi/v/versioneer.svg -[pypi-url]: https://pypi.python.org/pypi/versioneer/ -[travis-image]: -https://img.shields.io/travis/com/python-versioneer/python-versioneer.svg -[travis-url]: https://travis-ci.com/github/python-versioneer/python-versioneer - -""" -# pylint:disable=invalid-name,import-outside-toplevel,missing-function-docstring -# pylint:disable=missing-class-docstring,too-many-branches,too-many-statements -# pylint:disable=raise-missing-from,too-many-lines,too-many-locals,import-error -# pylint:disable=too-few-public-methods,redefined-outer-name,consider-using-with -# pylint:disable=attribute-defined-outside-init,too-many-arguments - -import configparser -import errno -import json -import os -import re -import subprocess -import sys -from pathlib import Path -from typing import Callable, Dict -import functools - -have_tomllib = True -if sys.version_info >= (3, 11): - import tomllib -else: - try: - import tomli as tomllib - except ImportError: - have_tomllib = False - - -class VersioneerConfig: - """Container for Versioneer configuration parameters.""" - - -def get_root(): - """Get the project root directory. - - We require that all commands are run from the project root, i.e. the - directory that contains setup.py, setup.cfg, and versioneer.py . - """ - root = os.path.realpath(os.path.abspath(os.getcwd())) - setup_py = os.path.join(root, "setup.py") - versioneer_py = os.path.join(root, "versioneer.py") - if not (os.path.exists(setup_py) or os.path.exists(versioneer_py)): - # allow 'python path/to/setup.py COMMAND' - root = os.path.dirname(os.path.realpath(os.path.abspath(sys.argv[0]))) - setup_py = os.path.join(root, "setup.py") - versioneer_py = os.path.join(root, "versioneer.py") - if not (os.path.exists(setup_py) or os.path.exists(versioneer_py)): - err = ( - "Versioneer was unable to run the project root directory. " - "Versioneer requires setup.py to be executed from " - "its immediate directory (like 'python setup.py COMMAND'), " - "or in a way that lets it use sys.argv[0] to find the root " - "(like 'python path/to/setup.py COMMAND')." - ) - raise VersioneerBadRootError(err) - try: - # Certain runtime workflows (setup.py install/develop in a setuptools - # tree) execute all dependencies in a single python process, so - # "versioneer" may be imported multiple times, and python's shared - # module-import table will cache the first one. So we can't use - # os.path.dirname(__file__), as that will find whichever - # versioneer.py was first imported, even in later projects. - my_path = os.path.realpath(os.path.abspath(__file__)) - me_dir = os.path.normcase(os.path.splitext(my_path)[0]) - vsr_dir = os.path.normcase(os.path.splitext(versioneer_py)[0]) - if me_dir != vsr_dir and "VERSIONEER_PEP518" not in globals(): - print( - "Warning: build in %s is using versioneer.py from %s" - % (os.path.dirname(my_path), versioneer_py) - ) - except NameError: - pass - return root - - -def get_config_from_root(root): - """Read the project setup.cfg file to determine Versioneer config.""" - # This might raise OSError (if setup.cfg is missing), or - # configparser.NoSectionError (if it lacks a [versioneer] section), or - # configparser.NoOptionError (if it lacks "VCS="). See the docstring at - # the top of versioneer.py for instructions on writing your setup.cfg . - root = Path(root) - pyproject_toml = root / "pyproject.toml" - setup_cfg = root / "setup.cfg" - section = None - if pyproject_toml.exists() and have_tomllib: - try: - with open(pyproject_toml, "rb") as fobj: - pp = tomllib.load(fobj) - section = pp["tool"]["versioneer"] - except (tomllib.TOMLDecodeError, KeyError): - pass - if not section: - parser = configparser.ConfigParser() - with open(setup_cfg) as cfg_file: - parser.read_file(cfg_file) - parser.get("versioneer", "VCS") # raise error if missing - - section = parser["versioneer"] - - cfg = VersioneerConfig() - cfg.VCS = section["VCS"] - cfg.style = section.get("style", "") - cfg.versionfile_source = section.get("versionfile_source") - cfg.versionfile_build = section.get("versionfile_build") - cfg.tag_prefix = section.get("tag_prefix") - if cfg.tag_prefix in ("''", '""', None): - cfg.tag_prefix = "" - cfg.parentdir_prefix = section.get("parentdir_prefix") - cfg.verbose = section.get("verbose") - return cfg - - -class NotThisMethod(Exception): - """Exception raised if a method is not valid for the current scenario.""" - - -# these dictionaries contain VCS-specific tools -LONG_VERSION_PY: Dict[str, str] = {} -HANDLERS: Dict[str, Dict[str, Callable]] = {} - - -def register_vcs_handler(vcs, method): # decorator - """Create decorator to mark a method as the handler of a VCS.""" - - def decorate(f): - """Store f in HANDLERS[vcs][method].""" - HANDLERS.setdefault(vcs, {})[method] = f - return f - - return decorate - - -def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env=None): - """Call the given command(s).""" - assert isinstance(commands, list) - process = None - - popen_kwargs = {} - if sys.platform == "win32": - # This hides the console window if pythonw.exe is used - startupinfo = subprocess.STARTUPINFO() - startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW - popen_kwargs["startupinfo"] = startupinfo - - for command in commands: - try: - dispcmd = str([command] + args) - # remember shell=False, so use git.cmd on windows, not just git - process = subprocess.Popen( - [command] + args, - cwd=cwd, - env=env, - stdout=subprocess.PIPE, - stderr=(subprocess.PIPE if hide_stderr else None), - **popen_kwargs, - ) - break - except OSError: - e = sys.exc_info()[1] - if e.errno == errno.ENOENT: - continue - if verbose: - print("unable to run %s" % dispcmd) - print(e) - return None, None - else: - if verbose: - print(f"unable to find command, tried {commands}") - return None, None - stdout = process.communicate()[0].strip().decode() - if process.returncode != 0: - if verbose: - print("unable to run %s (error)" % dispcmd) - print("stdout was %s" % stdout) - return None, process.returncode - return stdout, process.returncode - - -LONG_VERSION_PY[ - "git" -] = r''' -# This file helps to compute a version number in source trees obtained from -# git-archive tarball (such as those provided by githubs download-from-tag -# feature). Distribution tarballs (built by setup.py sdist) and build -# directories (produced by setup.py build) will contain a much shorter file -# that just contains the computed version number. - -# This file is released into the public domain. -# Generated by versioneer-0.28 -# https://github.com/python-versioneer/python-versioneer - -"""Git implementation of _version.py.""" - -import errno -import os -import re -import subprocess -import sys -from typing import Callable, Dict -import functools - - -def get_keywords(): - """Get the keywords needed to look up the version information.""" - # these strings will be replaced by git during git-archive. - # setup.py/versioneer.py will grep for the variable names, so they must - # each be defined on a line of their own. _version.py will just call - # get_keywords(). - git_refnames = "%(DOLLAR)sFormat:%%d%(DOLLAR)s" - git_full = "%(DOLLAR)sFormat:%%H%(DOLLAR)s" - git_date = "%(DOLLAR)sFormat:%%ci%(DOLLAR)s" - keywords = {"refnames": git_refnames, "full": git_full, "date": git_date} - return keywords - - -class VersioneerConfig: - """Container for Versioneer configuration parameters.""" - - -def get_config(): - """Create, populate and return the VersioneerConfig() object.""" - # these strings are filled in when 'setup.py versioneer' creates - # _version.py - cfg = VersioneerConfig() - cfg.VCS = "git" - cfg.style = "%(STYLE)s" - cfg.tag_prefix = "%(TAG_PREFIX)s" - cfg.parentdir_prefix = "%(PARENTDIR_PREFIX)s" - cfg.versionfile_source = "%(VERSIONFILE_SOURCE)s" - cfg.verbose = False - return cfg - - -class NotThisMethod(Exception): - """Exception raised if a method is not valid for the current scenario.""" - - -LONG_VERSION_PY: Dict[str, str] = {} -HANDLERS: Dict[str, Dict[str, Callable]] = {} - - -def register_vcs_handler(vcs, method): # decorator - """Create decorator to mark a method as the handler of a VCS.""" - def decorate(f): - """Store f in HANDLERS[vcs][method].""" - if vcs not in HANDLERS: - HANDLERS[vcs] = {} - HANDLERS[vcs][method] = f - return f - return decorate - - -def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, - env=None): - """Call the given command(s).""" - assert isinstance(commands, list) - process = None - - popen_kwargs = {} - if sys.platform == "win32": - # This hides the console window if pythonw.exe is used - startupinfo = subprocess.STARTUPINFO() - startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW - popen_kwargs["startupinfo"] = startupinfo - - for command in commands: - try: - dispcmd = str([command] + args) - # remember shell=False, so use git.cmd on windows, not just git - process = subprocess.Popen([command] + args, cwd=cwd, env=env, - stdout=subprocess.PIPE, - stderr=(subprocess.PIPE if hide_stderr - else None), **popen_kwargs) - break - except OSError: - e = sys.exc_info()[1] - if e.errno == errno.ENOENT: - continue - if verbose: - print("unable to run %%s" %% dispcmd) - print(e) - return None, None - else: - if verbose: - print("unable to find command, tried %%s" %% (commands,)) - return None, None - stdout = process.communicate()[0].strip().decode() - if process.returncode != 0: - if verbose: - print("unable to run %%s (error)" %% dispcmd) - print("stdout was %%s" %% stdout) - return None, process.returncode - return stdout, process.returncode - - -def versions_from_parentdir(parentdir_prefix, root, verbose): - """Try to determine the version from the parent directory name. - - Source tarballs conventionally unpack into a directory that includes both - the project name and a version string. We will also support searching up - two directory levels for an appropriately named parent directory - """ - rootdirs = [] - - for _ in range(3): - dirname = os.path.basename(root) - if dirname.startswith(parentdir_prefix): - return {"version": dirname[len(parentdir_prefix):], - "full-revisionid": None, - "dirty": False, "error": None, "date": None} - rootdirs.append(root) - root = os.path.dirname(root) # up a level - - if verbose: - print("Tried directories %%s but none started with prefix %%s" %% - (str(rootdirs), parentdir_prefix)) - raise NotThisMethod("rootdir doesn't start with parentdir_prefix") - - -@register_vcs_handler("git", "get_keywords") -def git_get_keywords(versionfile_abs): - """Extract version information from the given file.""" - # the code embedded in _version.py can just fetch the value of these - # keywords. When used from setup.py, we don't want to import _version.py, - # so we do it with a regexp instead. This function is not used from - # _version.py. - keywords = {} - try: - with open(versionfile_abs, "r") as fobj: - for line in fobj: - if line.strip().startswith("git_refnames ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["refnames"] = mo.group(1) - if line.strip().startswith("git_full ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["full"] = mo.group(1) - if line.strip().startswith("git_date ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["date"] = mo.group(1) - except OSError: - pass - return keywords - - -@register_vcs_handler("git", "keywords") -def git_versions_from_keywords(keywords, tag_prefix, verbose): - """Get version information from git keywords.""" - if "refnames" not in keywords: - raise NotThisMethod("Short version file found") - date = keywords.get("date") - if date is not None: - # Use only the last line. Previous lines may contain GPG signature - # information. - date = date.splitlines()[-1] - - # git-2.2.0 added "%%cI", which expands to an ISO-8601 -compliant - # datestamp. However we prefer "%%ci" (which expands to an "ISO-8601 - # -like" string, which we must then edit to make compliant), because - # it's been around since git-1.5.3, and it's too difficult to - # discover which version we're using, or to work around using an - # older one. - date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - refnames = keywords["refnames"].strip() - if refnames.startswith("$Format"): - if verbose: - print("keywords are unexpanded, not using") - raise NotThisMethod("unexpanded keywords, not a git-archive tarball") - refs = {r.strip() for r in refnames.strip("()").split(",")} - # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of - # just "foo-1.0". If we see a "tag: " prefix, prefer those. - TAG = "tag: " - tags = {r[len(TAG):] for r in refs if r.startswith(TAG)} - if not tags: - # Either we're using git < 1.8.3, or there really are no tags. We use - # a heuristic: assume all version tags have a digit. The old git %%d - # expansion behaves like git log --decorate=short and strips out the - # refs/heads/ and refs/tags/ prefixes that would let us distinguish - # between branches and tags. By ignoring refnames without digits, we - # filter out many common branch names like "release" and - # "stabilization", as well as "HEAD" and "master". - tags = {r for r in refs if re.search(r'\d', r)} - if verbose: - print("discarding '%%s', no digits" %% ",".join(refs - tags)) - if verbose: - print("likely tags: %%s" %% ",".join(sorted(tags))) - for ref in sorted(tags): - # sorting will prefer e.g. "2.0" over "2.0rc1" - if ref.startswith(tag_prefix): - r = ref[len(tag_prefix):] - # Filter out refs that exactly match prefix or that don't start - # with a number once the prefix is stripped (mostly a concern - # when prefix is '') - if not re.match(r'\d', r): - continue - if verbose: - print("picking %%s" %% r) - return {"version": r, - "full-revisionid": keywords["full"].strip(), - "dirty": False, "error": None, - "date": date} - # no suitable tags, so version is "0+unknown", but full hex is still there - if verbose: - print("no suitable tags, using unknown + full revision id") - return {"version": "0+unknown", - "full-revisionid": keywords["full"].strip(), - "dirty": False, "error": "no suitable tags", "date": None} - - -@register_vcs_handler("git", "pieces_from_vcs") -def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): - """Get version from 'git describe' in the root of the source tree. - - This only gets called if the git-archive 'subst' keywords were *not* - expanded, and _version.py hasn't already been rewritten with a short - version string, meaning we're inside a checked out source tree. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - - # GIT_DIR can interfere with correct operation of Versioneer. - # It may be intended to be passed to the Versioneer-versioned project, - # but that should not change where we get our version from. - env = os.environ.copy() - env.pop("GIT_DIR", None) - runner = functools.partial(runner, env=env) - - _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, - hide_stderr=not verbose) - if rc != 0: - if verbose: - print("Directory %%s not under git control" %% root) - raise NotThisMethod("'git rev-parse --git-dir' returned error") - - # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] - # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = runner(GITS, [ - "describe", "--tags", "--dirty", "--always", "--long", - "--match", f"{tag_prefix}[[:digit:]]*" - ], cwd=root) - # --long was added in git-1.5.5 - if describe_out is None: - raise NotThisMethod("'git describe' failed") - describe_out = describe_out.strip() - full_out, rc = runner(GITS, ["rev-parse", "HEAD"], cwd=root) - if full_out is None: - raise NotThisMethod("'git rev-parse' failed") - full_out = full_out.strip() - - pieces = {} - pieces["long"] = full_out - pieces["short"] = full_out[:7] # maybe improved later - pieces["error"] = None - - branch_name, rc = runner(GITS, ["rev-parse", "--abbrev-ref", "HEAD"], - cwd=root) - # --abbrev-ref was added in git-1.6.3 - if rc != 0 or branch_name is None: - raise NotThisMethod("'git rev-parse --abbrev-ref' returned error") - branch_name = branch_name.strip() - - if branch_name == "HEAD": - # If we aren't exactly on a branch, pick a branch which represents - # the current commit. If all else fails, we are on a branchless - # commit. - branches, rc = runner(GITS, ["branch", "--contains"], cwd=root) - # --contains was added in git-1.5.4 - if rc != 0 or branches is None: - raise NotThisMethod("'git branch --contains' returned error") - branches = branches.split("\n") - - # Remove the first line if we're running detached - if "(" in branches[0]: - branches.pop(0) - - # Strip off the leading "* " from the list of branches. - branches = [branch[2:] for branch in branches] - if "master" in branches: - branch_name = "master" - elif not branches: - branch_name = None - else: - # Pick the first branch that is returned. Good or bad. - branch_name = branches[0] - - pieces["branch"] = branch_name - - # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] - # TAG might have hyphens. - git_describe = describe_out - - # look for -dirty suffix - dirty = git_describe.endswith("-dirty") - pieces["dirty"] = dirty - if dirty: - git_describe = git_describe[:git_describe.rindex("-dirty")] - - # now we have TAG-NUM-gHEX or HEX - - if "-" in git_describe: - # TAG-NUM-gHEX - mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) - if not mo: - # unparsable. Maybe git-describe is misbehaving? - pieces["error"] = ("unable to parse git-describe output: '%%s'" - %% describe_out) - return pieces - - # tag - full_tag = mo.group(1) - if not full_tag.startswith(tag_prefix): - if verbose: - fmt = "tag '%%s' doesn't start with prefix '%%s'" - print(fmt %% (full_tag, tag_prefix)) - pieces["error"] = ("tag '%%s' doesn't start with prefix '%%s'" - %% (full_tag, tag_prefix)) - return pieces - pieces["closest-tag"] = full_tag[len(tag_prefix):] - - # distance: number of commits since tag - pieces["distance"] = int(mo.group(2)) - - # commit: short hex revision ID - pieces["short"] = mo.group(3) - - else: - # HEX: no tags - pieces["closest-tag"] = None - out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) - pieces["distance"] = len(out.split()) # total number of commits - - # commit date: see ISO-8601 comment in git_versions_from_keywords() - date = runner(GITS, ["show", "-s", "--format=%%ci", "HEAD"], cwd=root)[0].strip() - # Use only the last line. Previous lines may contain GPG signature - # information. - date = date.splitlines()[-1] - pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - - return pieces - - -def plus_or_dot(pieces): - """Return a + if we don't already have one, else return a .""" - if "+" in pieces.get("closest-tag", ""): - return "." - return "+" - - -def render_pep440(pieces): - """Build up version string, with post-release "local version identifier". - - Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you - get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty - - Exceptions: - 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += plus_or_dot(pieces) - rendered += "%%d.g%%s" %% (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0+untagged.%%d.g%%s" %% (pieces["distance"], - pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_branch(pieces): - """TAG[[.dev0]+DISTANCE.gHEX[.dirty]] . - - The ".dev0" means not master branch. Note that .dev0 sorts backwards - (a feature branch will appear "older" than the master branch). - - Exceptions: - 1: no tags. 0[.dev0]+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "%%d.g%%s" %% (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0" - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += "+untagged.%%d.g%%s" %% (pieces["distance"], - pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def pep440_split_post(ver): - """Split pep440 version string at the post-release segment. - - Returns the release segments before the post-release and the - post-release version number (or -1 if no post-release segment is present). - """ - vc = str.split(ver, ".post") - return vc[0], int(vc[1] or 0) if len(vc) == 2 else None - - -def render_pep440_pre(pieces): - """TAG[.postN.devDISTANCE] -- No -dirty. - - Exceptions: - 1: no tags. 0.post0.devDISTANCE - """ - if pieces["closest-tag"]: - if pieces["distance"]: - # update the post release segment - tag_version, post_version = pep440_split_post(pieces["closest-tag"]) - rendered = tag_version - if post_version is not None: - rendered += ".post%%d.dev%%d" %% (post_version + 1, pieces["distance"]) - else: - rendered += ".post0.dev%%d" %% (pieces["distance"]) - else: - # no commits, use the tag as the version - rendered = pieces["closest-tag"] - else: - # exception #1 - rendered = "0.post0.dev%%d" %% pieces["distance"] - return rendered - - -def render_pep440_post(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX] . - - The ".dev0" means dirty. Note that .dev0 sorts backwards - (a dirty tree will appear "older" than the corresponding clean one), - but you shouldn't be releasing software with -dirty anyways. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%%s" %% pieces["short"] - else: - # exception #1 - rendered = "0.post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += "+g%%s" %% pieces["short"] - return rendered - - -def render_pep440_post_branch(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX[.dirty]] . - - The ".dev0" means not master branch. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0]+gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%%d" %% pieces["distance"] - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%%s" %% pieces["short"] - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0.post%%d" %% pieces["distance"] - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += "+g%%s" %% pieces["short"] - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_old(pieces): - """TAG[.postDISTANCE[.dev0]] . - - The ".dev0" means dirty. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - else: - # exception #1 - rendered = "0.post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - return rendered - - -def render_git_describe(pieces): - """TAG[-DISTANCE-gHEX][-dirty]. - - Like 'git describe --tags --dirty --always'. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render_git_describe_long(pieces): - """TAG-DISTANCE-gHEX[-dirty]. - - Like 'git describe --tags --dirty --always -long'. - The distance/hash is unconditional. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render(pieces, style): - """Render the given version pieces into the requested style.""" - if pieces["error"]: - return {"version": "unknown", - "full-revisionid": pieces.get("long"), - "dirty": None, - "error": pieces["error"], - "date": None} - - if not style or style == "default": - style = "pep440" # the default - - if style == "pep440": - rendered = render_pep440(pieces) - elif style == "pep440-branch": - rendered = render_pep440_branch(pieces) - elif style == "pep440-pre": - rendered = render_pep440_pre(pieces) - elif style == "pep440-post": - rendered = render_pep440_post(pieces) - elif style == "pep440-post-branch": - rendered = render_pep440_post_branch(pieces) - elif style == "pep440-old": - rendered = render_pep440_old(pieces) - elif style == "git-describe": - rendered = render_git_describe(pieces) - elif style == "git-describe-long": - rendered = render_git_describe_long(pieces) - else: - raise ValueError("unknown style '%%s'" %% style) - - return {"version": rendered, "full-revisionid": pieces["long"], - "dirty": pieces["dirty"], "error": None, - "date": pieces.get("date")} - - -def get_versions(): - """Get version information or return default if unable to do so.""" - # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have - # __file__, we can work backwards from there to the root. Some - # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which - # case we can only use expanded keywords. - - cfg = get_config() - verbose = cfg.verbose - - try: - return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, - verbose) - except NotThisMethod: - pass - - try: - root = os.path.realpath(__file__) - # versionfile_source is the relative path from the top of the source - # tree (where the .git directory might live) to this file. Invert - # this to find the root from __file__. - for _ in cfg.versionfile_source.split('/'): - root = os.path.dirname(root) - except NameError: - return {"version": "0+unknown", "full-revisionid": None, - "dirty": None, - "error": "unable to find root of source tree", - "date": None} - - try: - pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) - return render(pieces, cfg.style) - except NotThisMethod: - pass - - try: - if cfg.parentdir_prefix: - return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) - except NotThisMethod: - pass - - return {"version": "0+unknown", "full-revisionid": None, - "dirty": None, - "error": "unable to compute version", "date": None} -''' - - -@register_vcs_handler("git", "get_keywords") -def git_get_keywords(versionfile_abs): - """Extract version information from the given file.""" - # the code embedded in _version.py can just fetch the value of these - # keywords. When used from setup.py, we don't want to import _version.py, - # so we do it with a regexp instead. This function is not used from - # _version.py. - keywords = {} - try: - with open(versionfile_abs) as fobj: - for line in fobj: - if line.strip().startswith("git_refnames ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["refnames"] = mo.group(1) - if line.strip().startswith("git_full ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["full"] = mo.group(1) - if line.strip().startswith("git_date ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["date"] = mo.group(1) - except OSError: - pass - return keywords - - -@register_vcs_handler("git", "keywords") -def git_versions_from_keywords(keywords, tag_prefix, verbose): - """Get version information from git keywords.""" - if "refnames" not in keywords: - raise NotThisMethod("Short version file found") - date = keywords.get("date") - if date is not None: - # Use only the last line. Previous lines may contain GPG signature - # information. - date = date.splitlines()[-1] - - # git-2.2.0 added "%cI", which expands to an ISO-8601 -compliant - # datestamp. However we prefer "%ci" (which expands to an "ISO-8601 - # -like" string, which we must then edit to make compliant), because - # it's been around since git-1.5.3, and it's too difficult to - # discover which version we're using, or to work around using an - # older one. - date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - refnames = keywords["refnames"].strip() - if refnames.startswith("$Format"): - if verbose: - print("keywords are unexpanded, not using") - raise NotThisMethod("unexpanded keywords, not a git-archive tarball") - refs = {r.strip() for r in refnames.strip("()").split(",")} - # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of - # just "foo-1.0". If we see a "tag: " prefix, prefer those. - TAG = "tag: " - tags = {r[len(TAG) :] for r in refs if r.startswith(TAG)} - if not tags: - # Either we're using git < 1.8.3, or there really are no tags. We use - # a heuristic: assume all version tags have a digit. The old git %d - # expansion behaves like git log --decorate=short and strips out the - # refs/heads/ and refs/tags/ prefixes that would let us distinguish - # between branches and tags. By ignoring refnames without digits, we - # filter out many common branch names like "release" and - # "stabilization", as well as "HEAD" and "master". - tags = {r for r in refs if re.search(r"\d", r)} - if verbose: - print("discarding '%s', no digits" % ",".join(refs - tags)) - if verbose: - print("likely tags: %s" % ",".join(sorted(tags))) - for ref in sorted(tags): - # sorting will prefer e.g. "2.0" over "2.0rc1" - if ref.startswith(tag_prefix): - r = ref[len(tag_prefix) :] - # Filter out refs that exactly match prefix or that don't start - # with a number once the prefix is stripped (mostly a concern - # when prefix is '') - if not re.match(r"\d", r): - continue - if verbose: - print("picking %s" % r) - return { - "version": r, - "full-revisionid": keywords["full"].strip(), - "dirty": False, - "error": None, - "date": date, - } - # no suitable tags, so version is "0+unknown", but full hex is still there - if verbose: - print("no suitable tags, using unknown + full revision id") - return { - "version": "0+unknown", - "full-revisionid": keywords["full"].strip(), - "dirty": False, - "error": "no suitable tags", - "date": None, - } - - -@register_vcs_handler("git", "pieces_from_vcs") -def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): - """Get version from 'git describe' in the root of the source tree. - - This only gets called if the git-archive 'subst' keywords were *not* - expanded, and _version.py hasn't already been rewritten with a short - version string, meaning we're inside a checked out source tree. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - - # GIT_DIR can interfere with correct operation of Versioneer. - # It may be intended to be passed to the Versioneer-versioned project, - # but that should not change where we get our version from. - env = os.environ.copy() - env.pop("GIT_DIR", None) - runner = functools.partial(runner, env=env) - - _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=not verbose) - if rc != 0: - if verbose: - print("Directory %s not under git control" % root) - raise NotThisMethod("'git rev-parse --git-dir' returned error") - - # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] - # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = runner( - GITS, - [ - "describe", - "--tags", - "--dirty", - "--always", - "--long", - "--match", - f"{tag_prefix}[[:digit:]]*", - ], - cwd=root, - ) - # --long was added in git-1.5.5 - if describe_out is None: - raise NotThisMethod("'git describe' failed") - describe_out = describe_out.strip() - full_out, rc = runner(GITS, ["rev-parse", "HEAD"], cwd=root) - if full_out is None: - raise NotThisMethod("'git rev-parse' failed") - full_out = full_out.strip() - - pieces = {} - pieces["long"] = full_out - pieces["short"] = full_out[:7] # maybe improved later - pieces["error"] = None - - branch_name, rc = runner(GITS, ["rev-parse", "--abbrev-ref", "HEAD"], cwd=root) - # --abbrev-ref was added in git-1.6.3 - if rc != 0 or branch_name is None: - raise NotThisMethod("'git rev-parse --abbrev-ref' returned error") - branch_name = branch_name.strip() - - if branch_name == "HEAD": - # If we aren't exactly on a branch, pick a branch which represents - # the current commit. If all else fails, we are on a branchless - # commit. - branches, rc = runner(GITS, ["branch", "--contains"], cwd=root) - # --contains was added in git-1.5.4 - if rc != 0 or branches is None: - raise NotThisMethod("'git branch --contains' returned error") - branches = branches.split("\n") - - # Remove the first line if we're running detached - if "(" in branches[0]: - branches.pop(0) - - # Strip off the leading "* " from the list of branches. - branches = [branch[2:] for branch in branches] - if "master" in branches: - branch_name = "master" - elif not branches: - branch_name = None - else: - # Pick the first branch that is returned. Good or bad. - branch_name = branches[0] - - pieces["branch"] = branch_name - - # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] - # TAG might have hyphens. - git_describe = describe_out - - # look for -dirty suffix - dirty = git_describe.endswith("-dirty") - pieces["dirty"] = dirty - if dirty: - git_describe = git_describe[: git_describe.rindex("-dirty")] - - # now we have TAG-NUM-gHEX or HEX - - if "-" in git_describe: - # TAG-NUM-gHEX - mo = re.search(r"^(.+)-(\d+)-g([0-9a-f]+)$", git_describe) - if not mo: - # unparsable. Maybe git-describe is misbehaving? - pieces["error"] = "unable to parse git-describe output: '%s'" % describe_out - return pieces - - # tag - full_tag = mo.group(1) - if not full_tag.startswith(tag_prefix): - if verbose: - fmt = "tag '%s' doesn't start with prefix '%s'" - print(fmt % (full_tag, tag_prefix)) - pieces["error"] = "tag '{}' doesn't start with prefix '{}'".format( - full_tag, tag_prefix - ) - return pieces - pieces["closest-tag"] = full_tag[len(tag_prefix) :] - - # distance: number of commits since tag - pieces["distance"] = int(mo.group(2)) - - # commit: short hex revision ID - pieces["short"] = mo.group(3) - - else: - # HEX: no tags - pieces["closest-tag"] = None - out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) - pieces["distance"] = len(out.split()) # total number of commits - - # commit date: see ISO-8601 comment in git_versions_from_keywords() - date = runner(GITS, ["show", "-s", "--format=%ci", "HEAD"], cwd=root)[0].strip() - # Use only the last line. Previous lines may contain GPG signature - # information. - date = date.splitlines()[-1] - pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - - return pieces - - -def do_vcs_install(versionfile_source, ipy): - """Git-specific installation logic for Versioneer. - - For Git, this means creating/changing .gitattributes to mark _version.py - for export-subst keyword substitution. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - files = [versionfile_source] - if ipy: - files.append(ipy) - if "VERSIONEER_PEP518" not in globals(): - try: - my_path = __file__ - if my_path.endswith((".pyc", ".pyo")): - my_path = os.path.splitext(my_path)[0] + ".py" - versioneer_file = os.path.relpath(my_path) - except NameError: - versioneer_file = "versioneer.py" - files.append(versioneer_file) - present = False - try: - with open(".gitattributes") as fobj: - for line in fobj: - if line.strip().startswith(versionfile_source): - if "export-subst" in line.strip().split()[1:]: - present = True - break - except OSError: - pass - if not present: - with open(".gitattributes", "a+") as fobj: - fobj.write(f"{versionfile_source} export-subst\n") - files.append(".gitattributes") - run_command(GITS, ["add", "--"] + files) - - -def versions_from_parentdir(parentdir_prefix, root, verbose): - """Try to determine the version from the parent directory name. - - Source tarballs conventionally unpack into a directory that includes both - the project name and a version string. We will also support searching up - two directory levels for an appropriately named parent directory - """ - rootdirs = [] - - for _ in range(3): - dirname = os.path.basename(root) - if dirname.startswith(parentdir_prefix): - return { - "version": dirname[len(parentdir_prefix) :], - "full-revisionid": None, - "dirty": False, - "error": None, - "date": None, - } - rootdirs.append(root) - root = os.path.dirname(root) # up a level - - if verbose: - print( - "Tried directories %s but none started with prefix %s" - % (str(rootdirs), parentdir_prefix) - ) - raise NotThisMethod("rootdir doesn't start with parentdir_prefix") - - -SHORT_VERSION_PY = """ -# This file was generated by 'versioneer.py' (0.28) from -# revision-control system data, or from the parent directory name of an -# unpacked source archive. Distribution tarballs contain a pre-generated copy -# of this file. - -import json - -version_json = ''' -%s -''' # END VERSION_JSON - - -def get_versions(): - return json.loads(version_json) -""" - - -def versions_from_file(filename): - """Try to determine the version from _version.py if present.""" - try: - with open(filename) as f: - contents = f.read() - except OSError: - raise NotThisMethod("unable to read _version.py") - mo = re.search(r"version_json = '''\n(.*)''' # END VERSION_JSON", contents, re.M | re.S) - if not mo: - mo = re.search(r"version_json = '''\r\n(.*)''' # END VERSION_JSON", contents, re.M | re.S) - if not mo: - raise NotThisMethod("no version_json in _version.py") - return json.loads(mo.group(1)) - - -def write_to_version_file(filename, versions): - """Write the given version number to the given _version.py file.""" - os.unlink(filename) - contents = json.dumps(versions, sort_keys=True, indent=1, separators=(",", ": ")) - with open(filename, "w") as f: - f.write(SHORT_VERSION_PY % contents) - - print("set {} to '{}'".format(filename, versions["version"])) - - -def plus_or_dot(pieces): - """Return a + if we don't already have one, else return a .""" - if "+" in pieces.get("closest-tag", ""): - return "." - return "+" - - -def render_pep440(pieces): - """Build up version string, with post-release "local version identifier". - - Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you - get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty - - Exceptions: - 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += plus_or_dot(pieces) - rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0+untagged.%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_branch(pieces): - """TAG[[.dev0]+DISTANCE.gHEX[.dirty]] . - - The ".dev0" means not master branch. Note that .dev0 sorts backwards - (a feature branch will appear "older" than the master branch). - - Exceptions: - 1: no tags. 0[.dev0]+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0" - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += "+untagged.%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def pep440_split_post(ver): - """Split pep440 version string at the post-release segment. - - Returns the release segments before the post-release and the - post-release version number (or -1 if no post-release segment is present). - """ - vc = str.split(ver, ".post") - return vc[0], int(vc[1] or 0) if len(vc) == 2 else None - - -def render_pep440_pre(pieces): - """TAG[.postN.devDISTANCE] -- No -dirty. - - Exceptions: - 1: no tags. 0.post0.devDISTANCE - """ - if pieces["closest-tag"]: - if pieces["distance"]: - # update the post release segment - tag_version, post_version = pep440_split_post(pieces["closest-tag"]) - rendered = tag_version - if post_version is not None: - rendered += ".post%d.dev%d" % (post_version + 1, pieces["distance"]) - else: - rendered += ".post0.dev%d" % (pieces["distance"]) - else: - # no commits, use the tag as the version - rendered = pieces["closest-tag"] - else: - # exception #1 - rendered = "0.post0.dev%d" % pieces["distance"] - return rendered - - -def render_pep440_post(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX] . - - The ".dev0" means dirty. Note that .dev0 sorts backwards - (a dirty tree will appear "older" than the corresponding clean one), - but you shouldn't be releasing software with -dirty anyways. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%s" % pieces["short"] - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += "+g%s" % pieces["short"] - return rendered - - -def render_pep440_post_branch(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX[.dirty]] . - - The ".dev0" means not master branch. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0]+gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%s" % pieces["short"] - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["branch"] != "master": - rendered += ".dev0" - rendered += "+g%s" % pieces["short"] - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_old(pieces): - """TAG[.postDISTANCE[.dev0]] . - - The ".dev0" means dirty. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - return rendered - - -def render_git_describe(pieces): - """TAG[-DISTANCE-gHEX][-dirty]. - - Like 'git describe --tags --dirty --always'. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render_git_describe_long(pieces): - """TAG-DISTANCE-gHEX[-dirty]. - - Like 'git describe --tags --dirty --always -long'. - The distance/hash is unconditional. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render(pieces, style): - """Render the given version pieces into the requested style.""" - if pieces["error"]: - return { - "version": "unknown", - "full-revisionid": pieces.get("long"), - "dirty": None, - "error": pieces["error"], - "date": None, - } - - if not style or style == "default": - style = "pep440" # the default - - if style == "pep440": - rendered = render_pep440(pieces) - elif style == "pep440-branch": - rendered = render_pep440_branch(pieces) - elif style == "pep440-pre": - rendered = render_pep440_pre(pieces) - elif style == "pep440-post": - rendered = render_pep440_post(pieces) - elif style == "pep440-post-branch": - rendered = render_pep440_post_branch(pieces) - elif style == "pep440-old": - rendered = render_pep440_old(pieces) - elif style == "git-describe": - rendered = render_git_describe(pieces) - elif style == "git-describe-long": - rendered = render_git_describe_long(pieces) - else: - raise ValueError("unknown style '%s'" % style) - - return { - "version": rendered, - "full-revisionid": pieces["long"], - "dirty": pieces["dirty"], - "error": None, - "date": pieces.get("date"), - } - - -class VersioneerBadRootError(Exception): - """The project root directory is unknown or missing key files.""" - - -def get_versions(verbose=False): - """Get the project version from whatever source is available. - - Returns dict with two keys: 'version' and 'full'. - """ - if "versioneer" in sys.modules: - # see the discussion in cmdclass.py:get_cmdclass() - del sys.modules["versioneer"] - - root = get_root() - cfg = get_config_from_root(root) - - assert cfg.VCS is not None, "please set [versioneer]VCS= in setup.cfg" - handlers = HANDLERS.get(cfg.VCS) - assert handlers, "unrecognized VCS '%s'" % cfg.VCS - verbose = verbose or cfg.verbose - assert cfg.versionfile_source is not None, "please set versioneer.versionfile_source" - assert cfg.tag_prefix is not None, "please set versioneer.tag_prefix" - - versionfile_abs = os.path.join(root, cfg.versionfile_source) - - # extract version from first of: _version.py, VCS command (e.g. 'git - # describe'), parentdir. This is meant to work for developers using a - # source checkout, for users of a tarball created by 'setup.py sdist', - # and for users of a tarball/zipball created by 'git archive' or github's - # download-from-tag feature or the equivalent in other VCSes. - - get_keywords_f = handlers.get("get_keywords") - from_keywords_f = handlers.get("keywords") - if get_keywords_f and from_keywords_f: - try: - keywords = get_keywords_f(versionfile_abs) - ver = from_keywords_f(keywords, cfg.tag_prefix, verbose) - if verbose: - print("got version from expanded keyword %s" % ver) - return ver - except NotThisMethod: - pass - - try: - ver = versions_from_file(versionfile_abs) - if verbose: - print(f"got version from file {versionfile_abs} {ver}") - return ver - except NotThisMethod: - pass - - from_vcs_f = handlers.get("pieces_from_vcs") - if from_vcs_f: - try: - pieces = from_vcs_f(cfg.tag_prefix, root, verbose) - ver = render(pieces, cfg.style) - if verbose: - print("got version from VCS %s" % ver) - return ver - except NotThisMethod: - pass - - try: - if cfg.parentdir_prefix: - ver = versions_from_parentdir(cfg.parentdir_prefix, root, verbose) - if verbose: - print("got version from parentdir %s" % ver) - return ver - except NotThisMethod: - pass - - if verbose: - print("unable to compute version") - - return { - "version": "0+unknown", - "full-revisionid": None, - "dirty": None, - "error": "unable to compute version", - "date": None, - } - - -def get_version(): - """Get the short version string for this project.""" - return get_versions()["version"] - - -def get_cmdclass(cmdclass=None): - """Get the custom setuptools subclasses used by Versioneer. - - If the package uses a different cmdclass (e.g. one from numpy), it - should be provide as an argument. - """ - if "versioneer" in sys.modules: - del sys.modules["versioneer"] - # this fixes the "python setup.py develop" case (also 'install' and - # 'easy_install .'), in which subdependencies of the main project are - # built (using setup.py bdist_egg) in the same python process. Assume - # a main project A and a dependency B, which use different versions - # of Versioneer. A's setup.py imports A's Versioneer, leaving it in - # sys.modules by the time B's setup.py is executed, causing B to run - # with the wrong versioneer. Setuptools wraps the sub-dep builds in a - # sandbox that restores sys.modules to it's pre-build state, so the - # parent is protected against the child's "import versioneer". By - # removing ourselves from sys.modules here, before the child build - # happens, we protect the child from the parent's versioneer too. - # Also see https://github.com/python-versioneer/python-versioneer/issues/52 - - cmds = {} if cmdclass is None else cmdclass.copy() - - # we add "version" to setuptools - from setuptools import Command - - class cmd_version(Command): - description = "report generated version string" - user_options = [] - boolean_options = [] - - def initialize_options(self): - pass - - def finalize_options(self): - pass - - def run(self): - vers = get_versions(verbose=True) - print("Version: %s" % vers["version"]) - print(" full-revisionid: %s" % vers.get("full-revisionid")) - print(" dirty: %s" % vers.get("dirty")) - print(" date: %s" % vers.get("date")) - if vers["error"]: - print(" error: %s" % vers["error"]) - - cmds["version"] = cmd_version - - # we override "build_py" in setuptools - # - # most invocation pathways end up running build_py: - # distutils/build -> build_py - # distutils/install -> distutils/build ->.. - # setuptools/bdist_wheel -> distutils/install ->.. - # setuptools/bdist_egg -> distutils/install_lib -> build_py - # setuptools/install -> bdist_egg ->.. - # setuptools/develop -> ? - # pip install: - # copies source tree to a tempdir before running egg_info/etc - # if .git isn't copied too, 'git describe' will fail - # then does setup.py bdist_wheel, or sometimes setup.py install - # setup.py egg_info -> ? - - # pip install -e . and setuptool/editable_wheel will invoke build_py - # but the build_py command is not expected to copy any files. - - # we override different "build_py" commands for both environments - if "build_py" in cmds: - _build_py = cmds["build_py"] - else: - from setuptools.command.build_py import build_py as _build_py - - class cmd_build_py(_build_py): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - _build_py.run(self) - if getattr(self, "editable_mode", False): - # During editable installs `.py` and data files are - # not copied to build_lib - return - # now locate _version.py in the new build/ directory and replace - # it with an updated value - if cfg.versionfile_build: - target_versionfile = os.path.join(self.build_lib, cfg.versionfile_build) - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - - cmds["build_py"] = cmd_build_py - - if "build_ext" in cmds: - _build_ext = cmds["build_ext"] - else: - from setuptools.command.build_ext import build_ext as _build_ext - - class cmd_build_ext(_build_ext): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - _build_ext.run(self) - if self.inplace: - # build_ext --inplace will only build extensions in - # build/lib<..> dir with no _version.py to write to. - # As in place builds will already have a _version.py - # in the module dir, we do not need to write one. - return - # now locate _version.py in the new build/ directory and replace - # it with an updated value - if not cfg.versionfile_build: - return - target_versionfile = os.path.join(self.build_lib, cfg.versionfile_build) - if not os.path.exists(target_versionfile): - print( - f"Warning: {target_versionfile} does not exist, skipping " - "version update. This can happen if you are running build_ext " - "without first running build_py." - ) - return - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - - cmds["build_ext"] = cmd_build_ext - - if "cx_Freeze" in sys.modules: # cx_freeze enabled? - from cx_Freeze.dist import build_exe as _build_exe - - # nczeczulin reports that py2exe won't like the pep440-style string - # as FILEVERSION, but it can be used for PRODUCTVERSION, e.g. - # setup(console=[{ - # "version": versioneer.get_version().split("+", 1)[0], # FILEVERSION - # "product_version": versioneer.get_version(), - # ... - - class cmd_build_exe(_build_exe): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - target_versionfile = cfg.versionfile_source - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - - _build_exe.run(self) - os.unlink(target_versionfile) - with open(cfg.versionfile_source, "w") as f: - LONG = LONG_VERSION_PY[cfg.VCS] - f.write( - LONG - % { - "DOLLAR": "$", - "STYLE": cfg.style, - "TAG_PREFIX": cfg.tag_prefix, - "PARENTDIR_PREFIX": cfg.parentdir_prefix, - "VERSIONFILE_SOURCE": cfg.versionfile_source, - } - ) - - cmds["build_exe"] = cmd_build_exe - del cmds["build_py"] - - if "py2exe" in sys.modules: # py2exe enabled? - try: - from py2exe.setuptools_buildexe import py2exe as _py2exe - except ImportError: - from py2exe.distutils_buildexe import py2exe as _py2exe - - class cmd_py2exe(_py2exe): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - target_versionfile = cfg.versionfile_source - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - - _py2exe.run(self) - os.unlink(target_versionfile) - with open(cfg.versionfile_source, "w") as f: - LONG = LONG_VERSION_PY[cfg.VCS] - f.write( - LONG - % { - "DOLLAR": "$", - "STYLE": cfg.style, - "TAG_PREFIX": cfg.tag_prefix, - "PARENTDIR_PREFIX": cfg.parentdir_prefix, - "VERSIONFILE_SOURCE": cfg.versionfile_source, - } - ) - - cmds["py2exe"] = cmd_py2exe - - # sdist farms its file list building out to egg_info - if "egg_info" in cmds: - _egg_info = cmds["egg_info"] - else: - from setuptools.command.egg_info import egg_info as _egg_info - - class cmd_egg_info(_egg_info): - def find_sources(self): - # egg_info.find_sources builds the manifest list and writes it - # in one shot - super().find_sources() - - # Modify the filelist and normalize it - root = get_root() - cfg = get_config_from_root(root) - self.filelist.append("versioneer.py") - if cfg.versionfile_source: - # There are rare cases where versionfile_source might not be - # included by default, so we must be explicit - self.filelist.append(cfg.versionfile_source) - self.filelist.sort() - self.filelist.remove_duplicates() - - # The write method is hidden in the manifest_maker instance that - # generated the filelist and was thrown away - # We will instead replicate their final normalization (to unicode, - # and POSIX-style paths) - from setuptools import unicode_utils - - normalized = [ - unicode_utils.filesys_decode(f).replace(os.sep, "/") for f in self.filelist.files - ] - - manifest_filename = os.path.join(self.egg_info, "SOURCES.txt") - with open(manifest_filename, "w") as fobj: - fobj.write("\n".join(normalized)) - - cmds["egg_info"] = cmd_egg_info - - # we override different "sdist" commands for both environments - if "sdist" in cmds: - _sdist = cmds["sdist"] - else: - from setuptools.command.sdist import sdist as _sdist - - class cmd_sdist(_sdist): - def run(self): - versions = get_versions() - self._versioneer_generated_versions = versions - # unless we update this, the command will keep using the old - # version - self.distribution.metadata.version = versions["version"] - return _sdist.run(self) - - def make_release_tree(self, base_dir, files): - root = get_root() - cfg = get_config_from_root(root) - _sdist.make_release_tree(self, base_dir, files) - # now locate _version.py in the new base_dir directory - # (remembering that it may be a hardlink) and replace it with an - # updated value - target_versionfile = os.path.join(base_dir, cfg.versionfile_source) - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, self._versioneer_generated_versions) - - cmds["sdist"] = cmd_sdist - - return cmds - - -CONFIG_ERROR = """ -setup.cfg is missing the necessary Versioneer configuration. You need -a section like: - - [versioneer] - VCS = git - style = pep440 - versionfile_source = src/myproject/_version.py - versionfile_build = myproject/_version.py - tag_prefix = - parentdir_prefix = myproject- - -You will also need to edit your setup.py to use the results: - - import versioneer - setup(version=versioneer.get_version(), - cmdclass=versioneer.get_cmdclass(), ...) - -Please read the docstring in ./versioneer.py for configuration instructions, -edit setup.cfg, and re-run the installer or 'python versioneer.py setup'. -""" - -SAMPLE_CONFIG = """ -# See the docstring in versioneer.py for instructions. Note that you must -# re-run 'versioneer.py setup' after changing this section, and commit the -# resulting files. - -[versioneer] -#VCS = git -#style = pep440 -#versionfile_source = -#versionfile_build = -#tag_prefix = -#parentdir_prefix = - -""" - -OLD_SNIPPET = """ -from ._version import get_versions -__version__ = get_versions()['version'] -del get_versions -""" - -INIT_PY_SNIPPET = """ -from . import {0} -__version__ = {0}.get_versions()['version'] -""" - - -def do_setup(): - """Do main VCS-independent setup function for installing Versioneer.""" - root = get_root() - try: - cfg = get_config_from_root(root) - except (OSError, configparser.NoSectionError, configparser.NoOptionError) as e: - if isinstance(e, (OSError, configparser.NoSectionError)): - print("Adding sample versioneer config to setup.cfg", file=sys.stderr) - with open(os.path.join(root, "setup.cfg"), "a") as f: - f.write(SAMPLE_CONFIG) - print(CONFIG_ERROR, file=sys.stderr) - return 1 - - print(" creating %s" % cfg.versionfile_source) - with open(cfg.versionfile_source, "w") as f: - LONG = LONG_VERSION_PY[cfg.VCS] - f.write( - LONG - % { - "DOLLAR": "$", - "STYLE": cfg.style, - "TAG_PREFIX": cfg.tag_prefix, - "PARENTDIR_PREFIX": cfg.parentdir_prefix, - "VERSIONFILE_SOURCE": cfg.versionfile_source, - } - ) - - ipy = os.path.join(os.path.dirname(cfg.versionfile_source), "__init__.py") - if os.path.exists(ipy): - try: - with open(ipy) as f: - old = f.read() - except OSError: - old = "" - module = os.path.splitext(os.path.basename(cfg.versionfile_source))[0] - snippet = INIT_PY_SNIPPET.format(module) - if OLD_SNIPPET in old: - print(" replacing boilerplate in %s" % ipy) - with open(ipy, "w") as f: - f.write(old.replace(OLD_SNIPPET, snippet)) - elif snippet not in old: - print(" appending to %s" % ipy) - with open(ipy, "a") as f: - f.write(snippet) - else: - print(" %s unmodified" % ipy) - else: - print(" %s doesn't exist, ok" % ipy) - ipy = None - - # Make VCS-specific changes. For git, this means creating/changing - # .gitattributes to mark _version.py for export-subst keyword - # substitution. - do_vcs_install(cfg.versionfile_source, ipy) - return 0 - - -def scan_setup_py(): - """Validate the contents of setup.py against Versioneer's expectations.""" - found = set() - setters = False - errors = 0 - with open("setup.py") as f: - for line in f.readlines(): - if "import versioneer" in line: - found.add("import") - if "versioneer.get_cmdclass()" in line: - found.add("cmdclass") - if "versioneer.get_version()" in line: - found.add("get_version") - if "versioneer.VCS" in line: - setters = True - if "versioneer.versionfile_source" in line: - setters = True - if len(found) != 3: - print("") - print("Your setup.py appears to be missing some important items") - print("(but I might be wrong). Please make sure it has something") - print("roughly like the following:") - print("") - print(" import versioneer") - print(" setup( version=versioneer.get_version(),") - print(" cmdclass=versioneer.get_cmdclass(), ...)") - print("") - errors += 1 - if setters: - print("You should remove lines like 'versioneer.VCS = ' and") - print("'versioneer.versionfile_source = ' . This configuration") - print("now lives in setup.cfg, and should be removed from setup.py") - print("") - errors += 1 - return errors - - -def setup_command(): - """Set up Versioneer and exit with appropriate error code.""" - errors = do_setup() - errors += scan_setup_py() - sys.exit(1 if errors else 0) - - -if __name__ == "__main__": - cmd = sys.argv[1] - if cmd == "setup": - setup_command()