diff --git a/bitnami/airflow/README.md b/bitnami/airflow/README.md
index 6497180faee621..97f6d7e0a9950e 100644
--- a/bitnami/airflow/README.md
+++ b/bitnami/airflow/README.md
@@ -258,7 +258,7 @@ Alternatively, you can disable this behavior by setting the `setupDBJob.enabled`
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/apache/README.md b/bitnami/apache/README.md
index bef9a357ee2b2d..5eee5a8aaef137 100644
--- a/bitnami/apache/README.md
+++ b/bitnami/apache/README.md
@@ -51,7 +51,7 @@ These commands deploy Apache on the Kubernetes cluster in the default configurat
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/apisix/README.md b/bitnami/apisix/README.md
index 665af3535a279c..9cb0b8594e64d9 100644
--- a/bitnami/apisix/README.md
+++ b/bitnami/apisix/README.md
@@ -45,7 +45,7 @@ The command deploys apisix on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/appsmith/README.md b/bitnami/appsmith/README.md
index 5bd53ee69e5566..9914c4aba9a8cb 100644
--- a/bitnami/appsmith/README.md
+++ b/bitnami/appsmith/README.md
@@ -51,7 +51,7 @@ The command deploys Appsmith on the Kubernetes cluster in the default configurat
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/argo-cd/README.md b/bitnami/argo-cd/README.md
index e245e94e21ac6d..97d478424e85d2 100644
--- a/bitnami/argo-cd/README.md
+++ b/bitnami/argo-cd/README.md
@@ -49,7 +49,7 @@ The command deploys argo-cd on the Kubernetes cluster in the default configurati
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/argo-workflows/README.md b/bitnami/argo-workflows/README.md
index 973fc2cf6c2691..1c88078d239266 100644
--- a/bitnami/argo-workflows/README.md
+++ b/bitnami/argo-workflows/README.md
@@ -49,7 +49,7 @@ The command deploys Argo Workflows on the Kubernetes cluster in the default conf
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/aspnet-core/README.md b/bitnami/aspnet-core/README.md
index 6523d8a011ed5b..7046a2bf643d42 100644
--- a/bitnami/aspnet-core/README.md
+++ b/bitnami/aspnet-core/README.md
@@ -47,7 +47,7 @@ These commands deploy a ASP.NET Core application on the Kubernetes cluster in th
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/cassandra/README.md b/bitnami/cassandra/README.md
index 7c16c424b0e2b2..298066e473325b 100644
--- a/bitnami/cassandra/README.md
+++ b/bitnami/cassandra/README.md
@@ -48,7 +48,7 @@ These commands deploy one node with Apache Cassandra on the Kubernetes cluster i
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/cert-manager/README.md b/bitnami/cert-manager/README.md
index b70a973eedd3dc..afbcb6c1b04884 100644
--- a/bitnami/cert-manager/README.md
+++ b/bitnami/cert-manager/README.md
@@ -47,7 +47,7 @@ helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/cert-manager
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/clickhouse/README.md b/bitnami/clickhouse/README.md
index 0ca8d7350b2ade..d71ce572f5ec00 100644
--- a/bitnami/clickhouse/README.md
+++ b/bitnami/clickhouse/README.md
@@ -55,7 +55,7 @@ The command deploys ClickHouse on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/concourse/README.md b/bitnami/concourse/README.md
index 2e36487bb3d1a2..f742cdb44eefe8 100644
--- a/bitnami/concourse/README.md
+++ b/bitnami/concourse/README.md
@@ -49,7 +49,7 @@ The command deploys concourse on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/consul/README.md b/bitnami/consul/README.md
index 7e460fa1f1505e..262eddd7f09491 100644
--- a/bitnami/consul/README.md
+++ b/bitnami/consul/README.md
@@ -48,7 +48,7 @@ These commands deploy HashiCorp Consul on the Kubernetes cluster in the default
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/contour/README.md b/bitnami/contour/README.md
index 19a6be18302896..9380659072d186 100644
--- a/bitnami/contour/README.md
+++ b/bitnami/contour/README.md
@@ -50,7 +50,7 @@ These commands deploy contour on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/deepspeed/README.md b/bitnami/deepspeed/README.md
index 8b1a842c052e8d..a66106bfcea0bc 100644
--- a/bitnami/deepspeed/README.md
+++ b/bitnami/deepspeed/README.md
@@ -60,7 +60,7 @@ The command removes all the Kubernetes components associated with the chart and
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/discourse/README.md b/bitnami/discourse/README.md
index 6537987ddee2d7..8676e119736b9b 100644
--- a/bitnami/discourse/README.md
+++ b/bitnami/discourse/README.md
@@ -51,7 +51,7 @@ The command deploys Discourse on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/drupal/README.md b/bitnami/drupal/README.md
index 13b2ad7a5f2576..b3ee87be9c3162 100644
--- a/bitnami/drupal/README.md
+++ b/bitnami/drupal/README.md
@@ -51,7 +51,7 @@ The command deploys Drupal on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/ejbca/README.md b/bitnami/ejbca/README.md
index 79e583e0d7e69f..2fc91b9e0132f1 100644
--- a/bitnami/ejbca/README.md
+++ b/bitnami/ejbca/README.md
@@ -50,7 +50,7 @@ The command deploys EJBCA on the Kubernetes cluster in the default configuration
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/elasticsearch/README.md b/bitnami/elasticsearch/README.md
index 1a181af5923915..54974fdd05bf5f 100644
--- a/bitnami/elasticsearch/README.md
+++ b/bitnami/elasticsearch/README.md
@@ -48,7 +48,7 @@ These commands deploy Elasticsearch on the Kubernetes cluster in the default con
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/etcd/README.md b/bitnami/etcd/README.md
index 4441fef9c82228..25ffe0c920ff02 100644
--- a/bitnami/etcd/README.md
+++ b/bitnami/etcd/README.md
@@ -48,7 +48,7 @@ These commands deploy etcd on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/external-dns/README.md b/bitnami/external-dns/README.md
index 3c607d4c670ecf..3612b649737fa2 100644
--- a/bitnami/external-dns/README.md
+++ b/bitnami/external-dns/README.md
@@ -47,7 +47,7 @@ The command deploys ExternalDNS on the Kubernetes cluster in the default configu
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/flink/README.md b/bitnami/flink/README.md
index bfaf093292a69c..93a8f6bddd62a4 100644
--- a/bitnami/flink/README.md
+++ b/bitnami/flink/README.md
@@ -49,7 +49,7 @@ These commands deploy flink on the Kubernetes cluster in the default configurati
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/fluent-bit/README.md b/bitnami/fluent-bit/README.md
index 77f23a07ba7497..bc043e36392b03 100644
--- a/bitnami/fluent-bit/README.md
+++ b/bitnami/fluent-bit/README.md
@@ -49,7 +49,7 @@ These commands deploy fluent-bit on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/fluentd/README.md b/bitnami/fluentd/README.md
index 3e3673bf2b63b0..b8ef6b4740c6bb 100644
--- a/bitnami/fluentd/README.md
+++ b/bitnami/fluentd/README.md
@@ -50,7 +50,7 @@ These commands deploy Fluentd on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/flux/README.md b/bitnami/flux/README.md
index 6a813fd51e6420..225158a5a11d25 100644
--- a/bitnami/flux/README.md
+++ b/bitnami/flux/README.md
@@ -47,7 +47,7 @@ The command deploys flux on the Kubernetes cluster in the default configuration.
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/ghost/README.md b/bitnami/ghost/README.md
index 39b94f94a3c3e5..07dfa86c9a1510 100644
--- a/bitnami/ghost/README.md
+++ b/bitnami/ghost/README.md
@@ -51,7 +51,7 @@ The command deploys Ghost on the Kubernetes cluster in the default configuration
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/gitea/README.md b/bitnami/gitea/README.md
index 2781d4513f1c06..3c8c77f358db88 100644
--- a/bitnami/gitea/README.md
+++ b/bitnami/gitea/README.md
@@ -50,7 +50,7 @@ The command deploys Gitea on the Kubernetes cluster in the default configuration
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/grafana-loki/README.md b/bitnami/grafana-loki/README.md
index 05b5198266eb81..dab1e2da8d1cba 100644
--- a/bitnami/grafana-loki/README.md
+++ b/bitnami/grafana-loki/README.md
@@ -50,7 +50,7 @@ The command deploys grafana-loki on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/grafana-mimir/README.md b/bitnami/grafana-mimir/README.md
index e17fd9997b8466..a085d8038f8e90 100644
--- a/bitnami/grafana-mimir/README.md
+++ b/bitnami/grafana-mimir/README.md
@@ -50,7 +50,7 @@ The command deploys grafana-mimir on the Kubernetes cluster in the default confi
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/grafana-tempo/README.md b/bitnami/grafana-tempo/README.md
index d8967c0fc2bf18..14bd18695d2c20 100644
--- a/bitnami/grafana-tempo/README.md
+++ b/bitnami/grafana-tempo/README.md
@@ -50,7 +50,7 @@ The command deploys grafana-tempo on the Kubernetes cluster in the default confi
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/grafana/README.md b/bitnami/grafana/README.md
index c011c379bf269e..610fd668e69830 100644
--- a/bitnami/grafana/README.md
+++ b/bitnami/grafana/README.md
@@ -132,7 +132,7 @@ These commands deploy grafana on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/haproxy/README.md b/bitnami/haproxy/README.md
index 4404c4d2d758dd..d00bdf72f5740b 100644
--- a/bitnami/haproxy/README.md
+++ b/bitnami/haproxy/README.md
@@ -49,7 +49,7 @@ The command deploys haproxy on the Kubernetes cluster in the default configurati
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/harbor/README.md b/bitnami/harbor/README.md
index dd07ddf14a44f9..84534aee15a628 100644
--- a/bitnami/harbor/README.md
+++ b/bitnami/harbor/README.md
@@ -55,7 +55,7 @@ helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/harbor
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/influxdb/README.md b/bitnami/influxdb/README.md
index 8ce97375ee8885..eefce38957cc73 100644
--- a/bitnami/influxdb/README.md
+++ b/bitnami/influxdb/README.md
@@ -49,7 +49,7 @@ These commands deploy influxdb on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/jaeger/README.md b/bitnami/jaeger/README.md
index 3b6187f3e68be9..0a9358f3ded45d 100644
--- a/bitnami/jaeger/README.md
+++ b/bitnami/jaeger/README.md
@@ -59,7 +59,7 @@ The command removes all the Kubernetes components associated with the chart and
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/jenkins/README.md b/bitnami/jenkins/README.md
index db19edaa0acfad..a543ebbcaa26ac 100644
--- a/bitnami/jenkins/README.md
+++ b/bitnami/jenkins/README.md
@@ -49,7 +49,7 @@ These commands deploy Jenkins on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/jupyterhub/README.md b/bitnami/jupyterhub/README.md
index 870334facdf2a2..592ef62900fd0f 100644
--- a/bitnami/jupyterhub/README.md
+++ b/bitnami/jupyterhub/README.md
@@ -106,7 +106,7 @@ These commands deploy JupyterHub on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Understand the default configuration
 
diff --git a/bitnami/kafka/README.md b/bitnami/kafka/README.md
index 08310bcf01eaa4..360ed68e865f97 100644
--- a/bitnami/kafka/README.md
+++ b/bitnami/kafka/README.md
@@ -48,7 +48,7 @@ These commands deploy Kafka on the Kubernetes cluster in the default configurati
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/keycloak/README.md b/bitnami/keycloak/README.md
index 9fe0d3938c1bfc..3f2f492f2f7314 100644
--- a/bitnami/keycloak/README.md
+++ b/bitnami/keycloak/README.md
@@ -49,7 +49,7 @@ These commands deploy a Keycloak application on the Kubernetes cluster in the de
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/keydb/README.md b/bitnami/keydb/README.md
index 48fc7f9fa1f8e7..b3c316489fa770 100644
--- a/bitnami/keydb/README.md
+++ b/bitnami/keydb/README.md
@@ -158,7 +158,7 @@ Bitnami will release a new chart updating its containers if a new version of the
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Additional environment variables
 
diff --git a/bitnami/kiam/README.md b/bitnami/kiam/README.md
index 42566be4905611..cd7378498f3b19 100644
--- a/bitnami/kiam/README.md
+++ b/bitnami/kiam/README.md
@@ -52,7 +52,7 @@ These commands deploy a kiam application on the Kubernetes cluster in the defaul
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/kibana/README.md b/bitnami/kibana/README.md
index 658dee6b38c2c9..ac7651dd7191e4 100644
--- a/bitnami/kibana/README.md
+++ b/bitnami/kibana/README.md
@@ -51,7 +51,7 @@ This chart requires an Elasticsearch instance to work. You can use an already ex
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/kong/README.md b/bitnami/kong/README.md
index 7eef15066981d8..8e8673dcfdf9d3 100644
--- a/bitnami/kong/README.md
+++ b/bitnami/kong/README.md
@@ -50,7 +50,7 @@ These commands deploy kong on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/kube-prometheus/README.md b/bitnami/kube-prometheus/README.md
index 40a1aa02f725a6..9a887bd09230e2 100644
--- a/bitnami/kube-prometheus/README.md
+++ b/bitnami/kube-prometheus/README.md
@@ -57,7 +57,7 @@ The command deploys kube-prometheus on the Kubernetes cluster in the default con
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/kube-state-metrics/README.md b/bitnami/kube-state-metrics/README.md
index 761b48f6afe663..c97d454508fda2 100644
--- a/bitnami/kube-state-metrics/README.md
+++ b/bitnami/kube-state-metrics/README.md
@@ -45,7 +45,7 @@ The command deploys kube-state-metrics on the Kubernetes cluster in the default
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/kubeapps/README.md b/bitnami/kubeapps/README.md
index 5bc5d7bd54a084..90e60538856e11 100644
--- a/bitnami/kubeapps/README.md
+++ b/bitnami/kubeapps/README.md
@@ -63,7 +63,7 @@ Once you have installed Kubeapps follow the [Getting Started Guide](https://gith
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Backup and restore
 
diff --git a/bitnami/kuberay/README.md b/bitnami/kuberay/README.md
index fad52723240b8f..892efef7a57da4 100644
--- a/bitnami/kuberay/README.md
+++ b/bitnami/kuberay/README.md
@@ -47,7 +47,7 @@ The command deploys kuberay on the Kubernetes cluster in the default configurati
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/kubernetes-event-exporter/README.md b/bitnami/kubernetes-event-exporter/README.md
index 180f54e9aae3b1..1f301215d5f4a7 100644
--- a/bitnami/kubernetes-event-exporter/README.md
+++ b/bitnami/kubernetes-event-exporter/README.md
@@ -47,7 +47,7 @@ These commands deploy Kubernetes Event Exporter on the Kubernetes cluster in the
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/logstash/README.md b/bitnami/logstash/README.md
index 589a0daaf1be99..dbc5b6d7a7af4b 100644
--- a/bitnami/logstash/README.md
+++ b/bitnami/logstash/README.md
@@ -47,7 +47,7 @@ These commands deploy logstash on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/mastodon/README.md b/bitnami/mastodon/README.md
index efa84ada052ac4..a8c8b95750f59f 100644
--- a/bitnami/mastodon/README.md
+++ b/bitnami/mastodon/README.md
@@ -50,7 +50,7 @@ The command deploys Mastodon on the Kubernetes cluster in the default configurat
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/matomo/README.md b/bitnami/matomo/README.md
index 0202f7704620d4..2ff82e11b819ba 100644
--- a/bitnami/matomo/README.md
+++ b/bitnami/matomo/README.md
@@ -51,7 +51,7 @@ The command deploys Matomo on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/memcached/README.md b/bitnami/memcached/README.md
index bde83bbc367274..1ff4fc3305081f 100644
--- a/bitnami/memcached/README.md
+++ b/bitnami/memcached/README.md
@@ -47,7 +47,7 @@ These commands deploy Memcached on the Kubernetes cluster in the default configu
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/metallb/README.md b/bitnami/metallb/README.md
index 2e348f7b0a8355..bacfeb54d25926 100644
--- a/bitnami/metallb/README.md
+++ b/bitnami/metallb/README.md
@@ -50,7 +50,7 @@ These commands deploy metallb on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/metrics-server/README.md b/bitnami/metrics-server/README.md
index 9c5a7292ad3a3e..41855eb1f3852a 100644
--- a/bitnami/metrics-server/README.md
+++ b/bitnami/metrics-server/README.md
@@ -47,7 +47,7 @@ These commands deploy Metrics Server on the Kubernetes cluster in the default co
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/milvus/README.md b/bitnami/milvus/README.md
index 7b63f279dfa811..e0a5fc2e020267 100644
--- a/bitnami/milvus/README.md
+++ b/bitnami/milvus/README.md
@@ -50,7 +50,7 @@ The command deploys milvus on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/minio/README.md b/bitnami/minio/README.md
index 265bc503ddb9aa..e68a5e42a93492 100644
--- a/bitnami/minio/README.md
+++ b/bitnami/minio/README.md
@@ -48,7 +48,7 @@ These commands deploy MinIO® on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/mlflow/README.md b/bitnami/mlflow/README.md
index 62df338fe3edc9..3ecfc4438c70e4 100644
--- a/bitnami/mlflow/README.md
+++ b/bitnami/mlflow/README.md
@@ -51,7 +51,7 @@ The command deploys mlflow on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/mongodb-sharded/README.md b/bitnami/mongodb-sharded/README.md
index 7ffc6316faad9a..69960f44b0bf16 100644
--- a/bitnami/mongodb-sharded/README.md
+++ b/bitnami/mongodb-sharded/README.md
@@ -53,7 +53,7 @@ The command deploys MongoDB® on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/mongodb/README.md b/bitnami/mongodb/README.md
index d7e3f4f71dd677..7ae56bd7c7746c 100644
--- a/bitnami/mongodb/README.md
+++ b/bitnami/mongodb/README.md
@@ -121,7 +121,7 @@ The command deploys MongoDB(®) on the Kubernetes cluster in the default conf
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/moodle/README.md b/bitnami/moodle/README.md
index 575a202c1a2b26..20c0dbd8891364 100644
--- a/bitnami/moodle/README.md
+++ b/bitnami/moodle/README.md
@@ -51,7 +51,7 @@ The command deploys Moodle™ on the Kubernetes cluster in the default confi
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/multus-cni/README.md b/bitnami/multus-cni/README.md
index f19202b0ebdd43..62ad4d033ed021 100644
--- a/bitnami/multus-cni/README.md
+++ b/bitnami/multus-cni/README.md
@@ -49,7 +49,7 @@ The command deploys Multus CNI on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/mysql/README.md b/bitnami/mysql/README.md
index 3a4c793899edec..b493f98baa973e 100644
--- a/bitnami/mysql/README.md
+++ b/bitnami/mysql/README.md
@@ -48,7 +48,7 @@ These commands deploy MySQL on the Kubernetes cluster in the default configurati
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/nats/README.md b/bitnami/nats/README.md
index fc94f690ea918f..72e48273a5729c 100644
--- a/bitnami/nats/README.md
+++ b/bitnami/nats/README.md
@@ -47,7 +47,7 @@ The command deploys NATS on the Kubernetes cluster in the default configuration.
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/nginx-ingress-controller/README.md b/bitnami/nginx-ingress-controller/README.md
index 96d232615fb510..3e095603e403c5 100644
--- a/bitnami/nginx-ingress-controller/README.md
+++ b/bitnami/nginx-ingress-controller/README.md
@@ -49,7 +49,7 @@ These commands deploy nginx-ingress-controller on the Kubernetes cluster in the
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/nginx/README.md b/bitnami/nginx/README.md
index ff1410890e7a8d..afe71051ce097a 100644
--- a/bitnami/nginx/README.md
+++ b/bitnami/nginx/README.md
@@ -49,7 +49,7 @@ These commands deploy NGINX Open Source on the Kubernetes cluster in the default
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/node-exporter/README.md b/bitnami/node-exporter/README.md
index 1a9487ba71afcb..c057eabd36a488 100644
--- a/bitnami/node-exporter/README.md
+++ b/bitnami/node-exporter/README.md
@@ -45,7 +45,7 @@ The command deploys Node Exporter on the Kubernetes cluster in the default confi
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/oauth2-proxy/README.md b/bitnami/oauth2-proxy/README.md
index 60c1d9d062c33d..e502e0253bea13 100644
--- a/bitnami/oauth2-proxy/README.md
+++ b/bitnami/oauth2-proxy/README.md
@@ -51,7 +51,7 @@ The command deploys OAuth2 Proxy on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/odoo/README.md b/bitnami/odoo/README.md
index 8a7bebfa9559da..80acd066c48a4a 100644
--- a/bitnami/odoo/README.md
+++ b/bitnami/odoo/README.md
@@ -51,7 +51,7 @@ The command deploys Odoo on the Kubernetes cluster in the default configuration.
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/opensearch/README.md b/bitnami/opensearch/README.md
index 14542954b5aa22..b90308f2ce83b6 100644
--- a/bitnami/opensearch/README.md
+++ b/bitnami/opensearch/README.md
@@ -48,7 +48,7 @@ These commands deploy OpenSearch on the Kubernetes cluster in the default config
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/parse/README.md b/bitnami/parse/README.md
index 1f6789e9c58678..cb9d1d0470bf5a 100644
--- a/bitnami/parse/README.md
+++ b/bitnami/parse/README.md
@@ -49,7 +49,7 @@ The command deploys Parse on the Kubernetes cluster in the default configuration
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/phpmyadmin/README.md b/bitnami/phpmyadmin/README.md
index 9c4b4a7fa9fb4f..72a3d8d4e1ccdc 100644
--- a/bitnami/phpmyadmin/README.md
+++ b/bitnami/phpmyadmin/README.md
@@ -49,7 +49,7 @@ The command deploys phpMyAdmin on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/pinniped/README.md b/bitnami/pinniped/README.md
index 6193fe24570dfa..cfe75cda589963 100644
--- a/bitnami/pinniped/README.md
+++ b/bitnami/pinniped/README.md
@@ -49,7 +49,7 @@ The command deploys pinniped on the Kubernetes cluster in the default configurat
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/postgresql-ha/README.md b/bitnami/postgresql-ha/README.md
index 3a6f94d4f1a804..e29f45836d7594 100644
--- a/bitnami/postgresql-ha/README.md
+++ b/bitnami/postgresql-ha/README.md
@@ -61,7 +61,7 @@ helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/postgresql-ha
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/postgresql/README.md b/bitnami/postgresql/README.md
index f73749e85ca5b8..e14cd780c2911f 100644
--- a/bitnami/postgresql/README.md
+++ b/bitnami/postgresql/README.md
@@ -50,7 +50,7 @@ The command deploys PostgreSQL on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/prometheus/README.md b/bitnami/prometheus/README.md
index 885d7d023f5503..985e5adc5d7969 100644
--- a/bitnami/prometheus/README.md
+++ b/bitnami/prometheus/README.md
@@ -51,7 +51,7 @@ The command deploys Prometheus on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/pytorch/README.md b/bitnami/pytorch/README.md
index 10d438dea89c12..eb8b210c61de98 100644
--- a/bitnami/pytorch/README.md
+++ b/bitnami/pytorch/README.md
@@ -51,7 +51,7 @@ These commands deploy PyTorch on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/rabbitmq-cluster-operator/README.md b/bitnami/rabbitmq-cluster-operator/README.md
index 1aed0fe1bc7d7b..47cf678e331ed6 100644
--- a/bitnami/rabbitmq-cluster-operator/README.md
+++ b/bitnami/rabbitmq-cluster-operator/README.md
@@ -128,7 +128,7 @@ This solution allows to easily deploy multiple RabbitMQ instances compared to th
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Backup and restore
 
diff --git a/bitnami/rabbitmq/README.md b/bitnami/rabbitmq/README.md
index 404b9357dda2b6..1a5b0155b09ed4 100644
--- a/bitnami/rabbitmq/README.md
+++ b/bitnami/rabbitmq/README.md
@@ -48,7 +48,7 @@ The command deploys RabbitMQ on the Kubernetes cluster in the default configurat
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/redis-cluster/README.md b/bitnami/redis-cluster/README.md
index 85974b92fd1ff5..e6c3d3c0574385 100644
--- a/bitnami/redis-cluster/README.md
+++ b/bitnami/redis-cluster/README.md
@@ -67,7 +67,7 @@ helm install --timeout 600s myrelease oci://REGISTRY_NAME/REPOSITORY_NAME/redis-
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/redis/README.md b/bitnami/redis/README.md
index c8265b61b0ffc7..b891e78d2fefeb 100644
--- a/bitnami/redis/README.md
+++ b/bitnami/redis/README.md
@@ -63,7 +63,7 @@ The command deploys Redis® on the Kubernetes cluster in the default configur
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/redmine/README.md b/bitnami/redmine/README.md
index 8bc2dd4c863b2d..37856e0953625a 100644
--- a/bitnami/redmine/README.md
+++ b/bitnami/redmine/README.md
@@ -115,7 +115,7 @@ kubectl create secret generic my-cert-chain --from-file chain.pem
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/schema-registry/README.md b/bitnami/schema-registry/README.md
index 6fedf32cd3cb6e..5f9d312e5c4b15 100644
--- a/bitnami/schema-registry/README.md
+++ b/bitnami/schema-registry/README.md
@@ -47,7 +47,7 @@ These commands deploy Schema Registry on the Kubernetes cluster with the default
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/scylladb/README.md b/bitnami/scylladb/README.md
index c10e6f53fdd556..9af01cb8ffcb49 100644
--- a/bitnami/scylladb/README.md
+++ b/bitnami/scylladb/README.md
@@ -48,7 +48,7 @@ These commands deploy one node with ScyllaDB on the Kubernetes cluster in the de
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/sealed-secrets/README.md b/bitnami/sealed-secrets/README.md
index e636b5abdb530e..4726751a1a6f5e 100644
--- a/bitnami/sealed-secrets/README.md
+++ b/bitnami/sealed-secrets/README.md
@@ -47,7 +47,7 @@ The command deploys the Sealed Secrets controller on the Kubernetes cluster in t
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/seaweedfs/README.md b/bitnami/seaweedfs/README.md
index 3fdbbd188adc88..7506718dc1087f 100644
--- a/bitnami/seaweedfs/README.md
+++ b/bitnami/seaweedfs/README.md
@@ -51,7 +51,7 @@ The command deploys SeaweedFS on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` values (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/solr/README.md b/bitnami/solr/README.md
index 6aa0f03c52a952..f2af556462e878 100644
--- a/bitnami/solr/README.md
+++ b/bitnami/solr/README.md
@@ -59,7 +59,7 @@ The command removes all the Kubernetes components associated with the chart and
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/sonarqube/README.md b/bitnami/sonarqube/README.md
index c025cb756b3525..334b8b563a1424 100644
--- a/bitnami/sonarqube/README.md
+++ b/bitnami/sonarqube/README.md
@@ -47,7 +47,7 @@ The command deploys SonarQube™ on the Kubernetes cluster in the default co
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/spark/README.md b/bitnami/spark/README.md
index c9300a6b221c65..e8b78e2a131aeb 100644
--- a/bitnami/spark/README.md
+++ b/bitnami/spark/README.md
@@ -49,7 +49,7 @@ These commands deploy Apache Spark on the Kubernetes cluster in the default conf
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/spring-cloud-dataflow/README.md b/bitnami/spring-cloud-dataflow/README.md
index 713067cdce6ff2..ac17cf371ae865 100644
--- a/bitnami/spring-cloud-dataflow/README.md
+++ b/bitnami/spring-cloud-dataflow/README.md
@@ -46,7 +46,7 @@ These commands deploy Spring Cloud Data Flow on the Kubernetes cluster with the
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Backup and restore
 
diff --git a/bitnami/tensorflow-resnet/README.md b/bitnami/tensorflow-resnet/README.md
index 9d29c672b0dea0..3284a3e01df117 100644
--- a/bitnami/tensorflow-resnet/README.md
+++ b/bitnami/tensorflow-resnet/README.md
@@ -47,7 +47,7 @@ These commands deploy Tensorflow Serving ResNet model on the Kubernetes cluster
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/thanos/README.md b/bitnami/thanos/README.md
index 46dc5101f3563e..5e04ac800bb3af 100644
--- a/bitnami/thanos/README.md
+++ b/bitnami/thanos/README.md
@@ -81,7 +81,7 @@ Check the section [Integrate Thanos with Prometheus and Alertmanager](#integrate
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/tomcat/README.md b/bitnami/tomcat/README.md
index 49926b7e764929..ea617fe215c4bf 100644
--- a/bitnami/tomcat/README.md
+++ b/bitnami/tomcat/README.md
@@ -51,7 +51,7 @@ These commands deploy Tomcat on the Kubernetes cluster in the default configurat
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/valkey-cluster/README.md b/bitnami/valkey-cluster/README.md
index 343131a5cbdb7c..2f0001ae7a6860 100644
--- a/bitnami/valkey-cluster/README.md
+++ b/bitnami/valkey-cluster/README.md
@@ -67,7 +67,7 @@ helm install --timeout 600s myrelease oci://REGISTRY_NAME/REPOSITORY_NAME/valkey
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/valkey/README.md b/bitnami/valkey/README.md
index 5cb130008728b8..f88e327fd52511 100644
--- a/bitnami/valkey/README.md
+++ b/bitnami/valkey/README.md
@@ -48,7 +48,7 @@ The command deploys Valkey on the Kubernetes cluster in the default configuratio
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/vault/README.md b/bitnami/vault/README.md
index 9add694024462f..07888d3aa71f1a 100644
--- a/bitnami/vault/README.md
+++ b/bitnami/vault/README.md
@@ -45,7 +45,7 @@ The command deploys vault on the Kubernetes cluster in the default configuration
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Prometheus metrics
 
diff --git a/bitnami/whereabouts/README.md b/bitnami/whereabouts/README.md
index 94aa89038b9312..6d8e7f14c8e0f6 100644
--- a/bitnami/whereabouts/README.md
+++ b/bitnami/whereabouts/README.md
@@ -49,7 +49,7 @@ The command deploys Whereabouts on the Kubernetes cluster in the default configu
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling VS Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/wildfly/README.md b/bitnami/wildfly/README.md
index c4cf80abb5ac10..2c1b62ac52be4c 100644
--- a/bitnami/wildfly/README.md
+++ b/bitnami/wildfly/README.md
@@ -51,7 +51,7 @@ These commands deploy WildFly on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### [Rolling vs Immutable tags](https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-understand-rolling-tags-containers-index.html)
 
diff --git a/bitnami/wordpress/README.md b/bitnami/wordpress/README.md
index acb248ade5c4e8..a6857159bf8f20 100644
--- a/bitnami/wordpress/README.md
+++ b/bitnami/wordpress/README.md
@@ -49,7 +49,7 @@ The command deploys WordPress on the Kubernetes cluster in the default configura
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials
 
diff --git a/bitnami/zookeeper/README.md b/bitnami/zookeeper/README.md
index 67d8f36458fa06..649339c5444510 100644
--- a/bitnami/zookeeper/README.md
+++ b/bitnami/zookeeper/README.md
@@ -48,7 +48,7 @@ These commands deploy ZooKeeper on the Kubernetes cluster in the default configu
 
 Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the `resources` value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
 
-To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcePreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
+To make this process easier, the chart contains the `resourcesPreset` values, which automatically sets the `resources` section according to different presets. Check these presets in [the bitnami/common chart](https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15). However, in production workloads using `resourcesPreset` is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the [official Kubernetes documentation](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/).
 
 ### Update credentials