Readme_rev1.0

#////////////////////////////////////////////////////////////////////////////////////////
#Bitmapper Integration                                                                ///
#Maintaner:Piyush Ashtikar [piyushashtikar@outlook.com,piyush.ashtikar@bitmapper.com] ///
#////////////////////////////////////////////////////////////////////////////////////////


This is unofficial bsp layer for toradex to support apalis imx6 daughter board on yocto poky framework.

Using this bsp you can build the linux-imx for apalis.

Rootfs images such as core-image-minimal(tested) and all other multimedia images(not-tested) can be used.

Steps involved are:

1:)in local.conf set machine to apalis-imx6

2:)In sources directory git clone this folder meta-toradex-yocto

3:)in bblayers.conf add meta-toradex-yocto.

4:)bitbake core-image-minimal

5:)Prepare sd card

1st partition:1gb:fat16
2nd partition:rest space in card:ext3

6:)
mount /dev/[first partition] /mnt/mountpoint
from deploy folder
cp uImage-imx6q-apalis-eval.dtb /mnt/mountpoint/
cp uImage-imx6q-apalis-eval_v1_0.dtb /mnt/mountpoint/
cp uImage /mnt/mountpoint/

7:)tar the rootfs from deploy folder

mount /dev/[second partition] /mnt/mountpoint
cp -pPrv rootfs_folder/* /mnt/mountpoint

8:)stop the boot process

Now you need to set boot parameters 

in sdargs change rootfs to mmcblk0p2(ie sdcard partition 2)

9:)run sdboot

Now core Image minimal should start.

Done :)

Fell free to ask any queries
piyushashtikar@outlook.com
piyush.ashtikar@bitmapper.com