move to max size instead of real

share/shwap/p2p/bitswap/block.go

@@ -21,10 +21,6 @@ type Block interface {
 	CID() cid.Cid
 	// Height reports the Height of the Shwap container behind the Block.
 	Height() uint64
-	// Size reports expected size of the Block(without serialization overhead).
-	// Must support getting size when the Block is not populated or empty and strive to
-	// be low overhead.
-	Size(context.Context, eds.Accessor) (int, error)
 
 	// Populate fills up the Block with the Shwap container getting it out of the EDS
 	// Accessor.

share/shwap/p2p/bitswap/block_registry.go

@@ -23,13 +23,24 @@ func EmptyBlock(cid cid.Cid) (Block, error) {
 	return blk, nil
 }
 
+// maxBlockSize returns the maximum size of the Block type in the given CID.
+func maxBlockSize(cid cid.Cid) (int, error) {
+	spec, ok := specRegistry[cid.Prefix().MhType]
+	if !ok {
+		return -1, fmt.Errorf("unsupported Block type: %v", cid.Prefix().MhType)
+	}
+
+	return spec.maxSize, nil
+}
+
 // registerBlock registers the new Block type and multihash for it.
-func registerBlock(mhcode, codec uint64, idSize int, bldrFn func(cid.Cid) (Block, error)) {
+func registerBlock(mhcode, codec uint64, maxSize, idSize int, bldrFn func(cid.Cid) (Block, error)) {
 	mh.Register(mhcode, func() hash.Hash {
 		return &hasher{IDSize: idSize}
 	})
 	specRegistry[mhcode] = blockSpec{
 		idSize:  idSize,
+		maxSize: maxSize,
 		codec:   codec,
 		builder: bldrFn,
 	}
@@ -38,6 +49,7 @@ func registerBlock(mhcode, codec uint64, idSize int, bldrFn func(cid.Cid) (Block
 // blockSpec holds constant metadata about particular Block types.
 type blockSpec struct {
 	idSize  int
+	maxSize int
 	codec   uint64
 	builder func(cid.Cid) (Block, error)
 }

share/shwap/p2p/bitswap/block_store.go

@@ -64,25 +64,14 @@ func (b *Blockstore) Get(ctx context.Context, cid cid.Cid) (blocks.Block, error)
 	return convertBitswap(blk)
 }
 
-func (b *Blockstore) GetSize(ctx context.Context, cid cid.Cid) (int, error) {
-	// NOTE: Bitswap prioritizes peers based on their active/pending work and the priority that peers set for the work
-	// themselves, where the work is the Get operation. The prioritization happens only on the Get operation and not
-	// GetSize, while GetSize is expected to be as lightweight as possible.
-	//
-	// Here is the best case we only open the Accessor and getting its size, avoiding expensive compute to get the size.
-	blk, acc, err := b.getBlockAndAccessor(ctx, cid)
-	if err != nil {
-		return 0, err
-	}
-	defer func() {
-		if err := acc.Close(); err != nil {
-			log.Warnf("failed to close EDS accessor for height %v: %s", blk.Height(), err)
-		}
-	}()
+func (b *Blockstore) GetSize(_ context.Context, cid cid.Cid) (int, error) {
+	// NOTE: Size is used as a weight for the incoming request to Bitswap. Bitswap uses fair scheduling for the requests
+	// and prioritize peers with less active work with work being cumulative weight of in process requests.
 
-	size, err := blk.Size(ctx, acc)
+	// By using constant max block size instead of real we equalize the weight of all the requests
+	size, err := maxBlockSize(cid)
 	if err != nil {
-		return 0, fmt.Errorf("getting block size: %w", err)
+		return 0, err
 	}
 
 	return size, nil

share/shwap/p2p/bitswap/block_test.go

@@ -20,13 +20,15 @@ import (
 const (
 	testCodec         = 0x9999
 	testMultihashCode = 0x9999
+	testBlockSize     = 256
 	testIDSize        = 2
 )
 
 func init() {
 	registerBlock(
 		testMultihashCode,
 		testCodec,
+		testBlockSize,
 		testIDSize,
 		func(cid cid.Cid) (Block, error) {
 			return newEmptyTestBlock(cid)
@@ -67,7 +69,7 @@ type testBlock struct {
 }
 
 func newTestBlock(id int) *testBlock {
-	bytes := make([]byte, 256)
+	bytes := make([]byte, testBlockSize)
 	_, _ = crand.Read(bytes)
 	return &testBlock{id: testID(id), data: bytes}
 }

share/shwap/p2p/bitswap/row_block.go

@@ -23,10 +23,15 @@ const (
 	rowMultihashCode = 0x7801
 )
 
+// maxRowSize is the maximum size of the RowBlock.
+// It is calculated as half of the square size multiplied by the share size.
+var maxRowSize = share.MaxSquareSize / 2 * libshare.ShareSize
+
 func init() {
 	registerBlock(
 		rowMultihashCode,
 		rowCodec,
+		maxRowSize,
 		shwap.RowIDSize,
 		func(cid cid.Cid) (Block, error) {
 			return EmptyRowBlockFromCID(cid)
@@ -73,12 +78,6 @@ func (rb *RowBlock) Height() uint64 {
 	return rb.ID.Height
 }
 
-func (rb *RowBlock) Size(ctx context.Context, acc eds.Accessor) (int, error) {
-	squareSize := acc.Size(ctx)
-	rowSize := libshare.ShareSize * squareSize / 2
-	return rowSize, nil
-}
-
 func (rb *RowBlock) Marshal() ([]byte, error) {
 	if rb.Container.IsEmpty() {
 		return nil, fmt.Errorf("cannot marshal empty RowBlock")

share/shwap/p2p/bitswap/row_namespace_data_block.go

@@ -22,10 +22,14 @@ const (
 	rowNamespaceDataMultihashCode = 0x7821
 )
 
+// maxRNDSize is the maximum size of the RowNamespaceDataBlock.
+var maxRNDSize = maxRowSize
+
 func init() {
 	registerBlock(
 		rowNamespaceDataMultihashCode,
 		rowNamespaceDataCodec,
+		maxRNDSize,
 		shwap.RowNamespaceDataIDSize,
 		func(cid cid.Cid) (Block, error) {
 			return EmptyRowNamespaceDataBlockFromCID(cid)
@@ -78,23 +82,6 @@ func (rndb *RowNamespaceDataBlock) Height() uint64 {
 	return rndb.ID.Height
 }
 
-func (rndb *RowNamespaceDataBlock) Size(ctx context.Context, acc eds.Accessor) (int, error) {
-	// no way to statically learn the size of requested data, so read it out and compute
-	// TODO(@Wondertan): Consider adding optimized RowNamespaceDataSize method to the Accessor
-	err := rndb.Populate(ctx, acc)
-	if err != nil {
-		return 0, err
-	}
-
-	// TODO(@Wondertan): Avoid converting in favor of getting size just by looking at container
-	blk, err := convertBitswap(rndb)
-	if err != nil {
-		return 0, err
-	}
-
-	return len(blk.RawData()), nil
-}
-
 func (rndb *RowNamespaceDataBlock) Marshal() ([]byte, error) {
 	if rndb.Container.IsEmpty() {
 		return nil, fmt.Errorf("cannot marshal empty RowNamespaceDataBlock")

share/shwap/p2p/bitswap/sample_block.go

@@ -24,10 +24,15 @@ const (
 	sampleMultihashCode = 0x7811
 )
 
+// maxSampleSize is the maximum size of the SampleBlock.
+// It is calculated as the size of the share plus the size of the proof.
+var maxSampleSize = libshare.ShareSize + share.AxisRootSize*int(math.Log2(float64(share.MaxSquareSize)))
+
 func init() {
 	registerBlock(
 		sampleMultihashCode,
 		sampleCodec,
+		maxSampleSize,
 		shwap.SampleIDSize,
 		func(cid cid.Cid) (Block, error) {
 			return EmptySampleBlockFromCID(cid)
@@ -74,12 +79,6 @@ func (sb *SampleBlock) Height() uint64 {
 	return sb.ID.Height
 }
 
-func (sb *SampleBlock) Size(ctx context.Context, acc eds.Accessor) (int, error) {
-	squareSize := acc.Size(ctx)
-	sampleSize := libshare.ShareSize + share.AxisRootSize*int(math.Log2(float64(squareSize)))
-	return sampleSize, nil
-}
-
 func (sb *SampleBlock) Marshal() ([]byte, error) {
 	if sb.Container.IsEmpty() {
 		return nil, fmt.Errorf("cannot marshal empty SampleBlock")