Peeps-UUIDs: A demo of JSONAPI-Resources using UUIDs and Postgresql

Peeps-UUIDs is a very basic contact management system implemented as an API that follows the JSON API spec. Peeps-UUIDs is based on https://github.com/cerebris/peeps.

Other apps will soon be written to demonstrate writing a consumer for this API.

Running this app

This app requires that postgresql be installed locally. General instructions are available here for many operating systems.

After cloning this repo, run the following:

bundle

Ensure that your config/database.yml is configured properly, and then run:

rake db:create db:migrate

Start your server:

rails server

Running this app with Docker

Actually, by using docker-compose, no dependencies (including Postgres) need to be installed on your machine.

After cloning the repo, uncomment these three lines in config/database.yml:

  host: <%= ENV['POSTGRES_PORT_5432_TCP_ADDR'] %> 
  port: <%= ENV['POSTGRES_PORT_5432_TCP_PORT'] %>
  username: postgres

Next, cd to the root directory and run the following:

docker-compose up --build

This will build and start the two Docker containers: one for Postgres and one for the Rails app. They are set to link ports.

In a new Terminal window, run docker ps to determine which container is running the Rails app. Then run the following:

docker exec -it <CONTAINER ID> /bin/bash

This will open a bash session in that container where you will run this line:

rake db:create db:migrate

You are now all set to go, with the Rails app responding to requests at localhost:3000.

Steps taken to create this app

The instructions below were followed to create this app from scratch.

Create a new Rails application

rails new peeps-uuids -d postgresql --skip-javascript

Setup your database.yml

The default database.yml may not work for your configuration, so you will need to set this up based on your installation.

Create the databases

rake db:create

Add the JSONAPI-Resources gem

Add the gem to your Gemfile

gem 'jsonapi-resources'

Then bundle

bundle

Application Controller

Make the following changes to application_controller.rb

class ApplicationController < ActionController::Base
  include JSONAPI::ActsAsResourceController
  
  # Prevent CSRF attacks by raising an exception.
  # For APIs, you may want to use :null_session instead.
  protect_from_forgery with: :null_session
end

OR

class ApplicationController < JSONAPI::ResourceController
  # Prevent CSRF attacks by raising an exception.
  # For APIs, you may want to use :null_session instead.
  protect_from_forgery with: :null_session
end

You can also do this on a per controller basis in your app, if only some controllers will serve the API.

Configure Development Environment

Edit config/environments/development.rb

Eager loading of classes is recommended. The code will work without it, but I think it's the right way to go. See http://blog.plataformatec.com.br/2012/08/eager-loading-for-greater-good/

  # Eager load code on boot so JSONAPI-Resources resources are loaded and processed globally
  config.eager_load = true

config.consider_all_requests_local       = false

This will prevent the server from returning the HTML formatted error messages when an exception happens. Not strictly necessary, but it makes for nicer output when debugging using curl or a client library.

Turn on UUID support for PostgreSQL

Create a migration to enable UUID support.

rails g migration EnableUuids

Edit the migration

class EnableUuids < ActiveRecord::Migration
  def change
    enable_extension 'uuid-ossp'
  end
end

Migrate the DB

rake db:migrate

Tell JR that we're using UUID keys

Create an initializer, such as config/initializers/jsonapi.rb, that contains the following:

JSONAPI.configure do |config|
  # Allowed values are :integer(default), :uuid, :string, or a proc
  config.resource_key_type = :uuid
end

This setting could alternatively be made on a per-resource basis.

Now let's fill out the app

Create Models for our data

Use the standard rails generator to create a model for Contacts and one for related PhoneNumbers

rails g model Contact first_name:string last_name:string email:string twitter:string

Edit the migration to set the id to use uuids

class CreateContacts < ActiveRecord::Migration
  def change
    create_table :contacts, id: :uuid  do |t|
      t.string :first_name
      t.string :last_name
      t.string :email
      t.string :twitter

      t.timestamps
    end
  end
end

Edit the model

class Contact < ApplicationRecord
  has_many :phone_numbers

  ### Validations
  validates :first_name, presence: true
  validates :last_name, presence: true

  def self.creatable_fields(context)
    super + [:id]
  end
end

Create the PhoneNumber model

rails g model PhoneNumber contact_id:integer name:string phone_number:string

Edit the migration for uuid

class CreatePhoneNumbers < ActiveRecord::Migration
  def change
    create_table :phone_numbers, id: :uuid do |t|
      t.uuid :contact_id
      t.string :name
      t.string :phone_number

      t.timestamps
    end
  end
end

Edit the model

class PhoneNumber < ApplicationRecord
  belongs_to :contact

  def self.creatable_fields(context)
    super + [:id]
  end
end

Migrate the DB

rake db:migrate

Create Controllers

Use the rails generator to create empty controllers. These will be inherit methods from the ResourceController so they will know how to respond to the standard REST methods.

rails g controller Contacts --skip-assets
rails g controller PhoneNumbers --skip-assets

Create our resources directory

We need a directory to hold our resources. Let's put in under our app directory

mkdir app/resources

Create the resources

Create a new file for each resource. This must be named in a standard way so it can be found. This should be the single underscored name of the model with _resource.rb appended. For Contacts this will be contact_resource.rb.

Make the two resource files

contact_resource.rb

class ContactResource < JSONAPI::Resource
  attributes :first_name, :last_name, :email, :twitter
  has_many :phone_numbers
end

and phone_number_resource.rb

class PhoneNumberResource < JSONAPI::Resource
  attributes :name, :phone_number
  has_one :contact

  filter :contact
end

Setup routes

Require jsonapi/routing_ext

require 'jsonapi/routing_ext'

Add the routes for the new resources

UUID_regex = /[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}(,[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12})*/

jsonapi_resources :contacts, constraints: {:id => UUID_regex}
jsonapi_resources :phone_numbers, constraints: {:id => UUID_regex}

Test it out

Launch the app

rails server

Create a new contact

curl -i -H "Accept: application/vnd.api+json" -H 'Content-Type:application/vnd.api+json' -X POST -d '{"data": {"type":"contacts", "attributes":{"first-name":"John", "last-name":"Doe", "email":"john.doe@example.com"}}}' http://localhost:3000/contacts

You should get something like this back

HTTP/1.1 201 Created
X-Frame-Options: SAMEORIGIN
X-XSS-Protection: 1; mode=block
X-Content-Type-Options: nosniff
Content-Type: application/vnd.api+json
Location: http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2
ETag: W/"1b5c63402a02363d3985132d8298bcee"
Cache-Control: max-age=0, private, must-revalidate
X-Request-Id: 34785427-6427-43ec-8fc7-34dc64a17e5b
X-Runtime: 0.023691
Transfer-Encoding: chunked

{"data":{"id":"77eec4e9-4244-492d-8340-18892e2c54b2","type":"contacts","links":{"self":"http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2"},"attributes":{"first-name":"John","last-name":"Doe","email":"john.doe@example.com","twitter":null},"relationships":{"phone-numbers":{"links":{"self":"http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2/relationships/phone-numbers","related":"http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2/phone-numbers"}}}}}

You can now create a phone number for this contact

curl -i -H "Accept: application/vnd.api+json" -H 'Content-Type:application/vnd.api+json' -X POST -d '{ "data": { "type": "phone-numbers", "relationships": { "contact": { "data": { "type": "contacts", "id": "77eec4e9-4244-492d-8340-18892e2c54b2" } } }, "attributes": { "name": "home", "phone-number": "(603) 555-1212" } } }' http://localhost:3000/phone-numbers

And you should get back something like this:

HTTP/1.1 201 Created
X-Frame-Options: SAMEORIGIN
X-XSS-Protection: 1; mode=block
X-Content-Type-Options: nosniff
Content-Type: application/vnd.api+json
Location: http://localhost:3000/phone-numbers/13a8befe-8958-49ed-9b94-a71768986465
ETag: W/"878009bdc1ac40d69706504a48ed49eb"
Cache-Control: max-age=0, private, must-revalidate
X-Request-Id: 3e345e2b-3ecf-44a4-92e6-c943e26413da
X-Runtime: 0.024379
Transfer-Encoding: chunked

{"data":{"id":"13a8befe-8958-49ed-9b94-a71768986465","type":"phone-numbers","links":{"self":"http://localhost:3000/phone-numbers/13a8befe-8958-49ed-9b94-a71768986465"},"attributes":{"name":"home","phone-number":"(603) 555-1212"},"relationships":{"contact":{"links":{"self":"http://localhost:3000/phone-numbers/13a8befe-8958-49ed-9b94-a71768986465/relationships/contact","related":"http://localhost:3000/phone-numbers/13a8befe-8958-49ed-9b94-a71768986465/contact"}}}}}

You can now query all one of your contacts

curl -i -H "Accept: application/vnd.api+json" "http://localhost:3000/contacts"

And you get this back:

HTTP/1.1 200 OK
X-Frame-Options: SAMEORIGIN
X-XSS-Protection: 1; mode=block
X-Content-Type-Options: nosniff
Content-Type: application/vnd.api+json
ETag: W/"aec78dabf2895bf6c4a9a7c4374e881e"
Cache-Control: max-age=0, private, must-revalidate
X-Request-Id: 0541fb25-6493-4d6a-a78a-2d3bf4b78330
X-Runtime: 0.005499
Transfer-Encoding: chunked

{"data":[{"id":"77eec4e9-4244-492d-8340-18892e2c54b2","type":"contacts","links":{"self":"http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2"},"attributes":{"first-name":"John","last-name":"Doe","email":"john.doe@example.com","twitter":null},"relationships":{"phone-numbers":{"links":{"self":"http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2/relationships/phone-numbers","related":"http://localhost:3000/contacts/77eec4e9-4244-492d-8340-18892e2c54b2/phone-numbers"}}}}]}

Note that the phone_number id is included in the links, but not the details of the phone number. You can get these by setting an include:

curl -i -H "Accept: application/vnd.api+json" "http://localhost:3000/contacts?include=phone-numbers"

and some fields:

curl -i -H "Accept: application/vnd.api+json" "http://localhost:3000/contacts?include=phone-numbers&fields%5Bcontacts%5D=fist-name,last-name&fields%5Bphone-numbers%5D=name"

Test a validation Error

curl -i -H "Accept: application/vnd.api+json" -H 'Content-Type:application/vnd.api+json' -X POST -d '{ "data": { "type": "contacts", "attributes": { "first-name": "John Doe", "email": "john.doe@boring.test" } } }' http://localhost:3000/contacts