mamaroo-mqtt

MQTT-based mamaRoo4 adapter for Home Assistant

HAOS Setup Notes

Unfortunately, this project is not available as a HA add-on (PRs welcome!). Troubleshooting is going to be difficult if you don't have experience with Docker.

1. You need to have the MQTT integration enabled. If you don't have a broker set up already, you can install one through the add-on store ("Mosquitto broker").
2. You need to discover the MAC address of your Mamaroo. If I remember correctly, you'll need to put it into pairing mode and then use a BLE scanner to find it. You can install a BLE scanner app on your phone and put it right against the Mamaroo.
3. You need to have the "SSH & Web Terminal" add-on (not "Terminal & SSH"!) installed and set up. Note that "Protection mode" needs to be disabled.
4. Open the add-on page and click "Open Web UI"
5. Clone (copy) the code from Github with this command:

   git clone https://github.com/chrisrosset/mamaroo-mqtt

6. Change the current directory to the project's:

   cd mamaroo-mqtt

7. Build the docker image with this command (this might take a while):

   docker build -t mamaroo .

8. Create and start a container. Replace the XXs with the MAC you found before:

   docker run -d --name mamaroo --restart=unless-stopped \
       -v /var/run/dbus:/var/run/dbus mamaroo --broker core-mosquitto \
       --username "your-user-here" --password "your-password-here"  XX:XX:XX:XX:XX:XX

If everything goes well, you should should see new entities appear (2 selects and 1 switch) in Home Assistant.