This module includes a couple of blocks to connect to either a NMEA0183 GPS or a gpsd instance (for shared receivers or non NMEA protocols. This can be used to inject position, velocity, and time information into flowgraphs or recordings.
Instantiate an nmea_gpsd or nmea_serial block in your flowgraph. The raw NMEA output is available on the out port and can probably be safely discarded; asynchronous messages resulting from the parsing of the NMEA stream is available on the gps_msg port.
Both nmea_gpsd.py and nmea_serial.py can be run as standalone programs to demonstrate their functionality.
pynmea2 is required for NMEA0183 parsing
gpsd is useful for multiplexed device access, though not required for these modules