validate

#!/bin/sh

set -e

show_help () {
    cat <<EOF
Usage: $0 [FLAGS]...

Validate GHC source tree against testsuite; see
https://gitlab.haskell.org/ghc/ghc/wikis/testing-patches for more
information.

Flags:
  --no-clean        don't make clean first, just carry on from
                    a previous interrupted validation run
  --testsuite-only  don't build the compiler, just run the test suite
  --build-only      don't test the compiler, just build it
  --hpc             build stage2 with -fhpc, and see how much of the
                    compiler the test suite covers.
                    2008-07-01: 63% slower than the default.
                    HTML generated here: testsuite/hpc_output/hpc_index.html
  --fast            Omit binary distribution. Omit certain tests.
  --slow            Build stage2 with -DDEBUG. Run tests for all WAYS,
                    but skip those that call compiler_stats_num_field.
                    2008-07-01: 14% slower than the default.
  --quiet           More pretty build log.
                    See Note [Default build system verbosity].
  --hadrian         Build the compiler and run the tests through hadrian.
  --stack           Use Stack to build Hadrian and the Stage 1 compiler.
  --help            shows this usage help.

  validate runs 'make -j\$THREADS', where by default THREADS is the number of
  cpus your computer has +1. You can set the environment variable THREADS to
  override this. For a sequential build you would for example use

    THREADS=1 ./validate

  You can set the 'config_args' environment variable to pass flags to
  'configure'.

  You can also use environment variables to pass extra options to the
  testsuite. For example:

    TEST='read001 read002' ./validate --testsuite-only --fast

EOF
}

no_clean=0
testsuite_only=0
build_only=0
hpc=NO
speed=NORMAL
be_quiet=0
# Validate uses gzip compression for the binary distribution to avoid the rather
# heavy cost of xz, which is the typical default. The options are defined in
# mk/config.mk.in
tar_comp=gzip
use_hadrian=NO
use_stack=NO

while [ $# -gt 0 ]
do
    case "$1" in
    --no-clean)
        no_clean=1
        ;;
    --testsuite-only)
        testsuite_only=1
        ;;
    --build-only)
        build_only=1
        ;;
    --hpc)
        hpc=YES
        ;;
    --slow)
        speed=SLOW
        ;;
    --fast)
        speed=FAST
        ;;
    --normal) # for backward compat
        speed=NORMAL
        ;;
    --quiet)
        be_quiet=1
        ;;
    --hadrian)
	use_hadrian=YES
	hadrian_build_root=_validatebuild
	;;
    --stack)
	use_stack=YES
	;;
    --help)
        show_help
        exit 0;;
    *)
        echo "$0: unrecognized argument '$1'" >&2
        echo "Try '$0 --help' for more information." >&2
        exit 1;;
    esac
    shift
done

check_packages () {
    if [ "$bindistdir" = "" ]
    then
	if [ "$use_hadrian" = "YES" ]
	then
	    ghc_pkg=$hadrian_build_root/stage1/bin/ghc-pkg
	else
            ghc_pkg=inplace/bin/ghc-pkg
	fi
    else
        ghc_pkg="$bindistdir"/bin/ghc-pkg
    fi

    if [ $be_quiet -eq 1 ]
    then
        "$ghc_pkg" check
    else
        echo "== Start $1 package check"
        "$ghc_pkg" check -v
        echo "== End $1 package check"
    fi
}

CPUS=`mk/detect-cpu-count.sh`

if ! [ -d testsuite ]
then
    echo 'Could not find the testsuite for validation' >&2
    exit 1
fi

if [ "$THREADS" = "" ]; then
    threads=$(($CPUS + 1)) # `expr $CPUS + 1`
else
    threads="$THREADS"
fi

echo "using THREADS=${threads}" >&2

if [ "$use_hadrian" = "NO" ]
then
    make="gmake"
   if type gmake > /dev/null 2> /dev/null
   then
       make="gmake"
   else
       make="make"
   fi
   if [ $be_quiet -eq 1 ]; then
       # See Note [Default build system verbosity].
       make="$make -s"
   fi
   $make -C utils/checkUniques
else
    # Just build hadrian.
    if [ "$use_stack" = "NO" ]
    then
       hadrian/build.sh --help > /dev/null
       cd hadrian
       hadrian_cmd=$(cabal new-exec -- which hadrian)
    else
       if [ $no_clean -eq 0 ]; then
          rm -rf hadrian/.stack-work
       fi
       hadrian/build.stack.sh --help > /dev/null
       cd hadrian
       hadrian_cmd=$(stack exec -- which hadrian)
    fi
    cd ..
    # TODO: define a hadrian Flavour that mimics
    # mk/flavours/validate.mk and use it here
    # Until then, we're using the default flavour.
    hadrian="$hadrian_cmd -j$threads --build-root=$hadrian_build_root"
    if [ $be_quiet -eq 0 ]; then
	hadrian="$hadrian -V"
    fi
    echo "Hadrian command: $hadrian"
fi

if [ $testsuite_only -eq 0 ]; then

thisdir=`pwd`

if [ $no_clean -eq 0 ]; then
    if [ "$use_hadrian" = "NO" ]
    then
	$make maintainer-clean
    else
	$hadrian clean && rm -rf $hadrian_build_root
    fi

    INSTDIR="$thisdir/inst"

    python3 ./boot --validate
    ./configure --prefix="$INSTDIR" $config_args
fi

if [ "$use_hadrian" = "NO" ]
then
    echo "Validating=YES"       >  mk/are-validating.mk
    echo "ValidateSpeed=$speed" >> mk/are-validating.mk
    echo "ValidateHpc=$hpc"     >> mk/are-validating.mk

    # Note [Default build system verbosity].
    #
    # From https://gitlab.haskell.org/ghc/ghc/wikis/design/build-system:
    #
    #   "The build system should clearly report what it's doing (and sometimes
    #   why), without being too verbose. It should emit actual command lines as
    #   much as possible, so that they can be inspected and cut & pasted."
    #
    # That should be the default. Only suppress commands, by setting V=0 and using
    # `make -s`, when user explicitly asks for it with `./validate --quiet`.
    if [ $be_quiet -eq 1 ]; then
	# See Note [Default build system verbosity].
	echo "V=0"                  >> mk/are-validating.mk # Less gunk
    fi

    $make -j$threads
    # For a "debug make", add "--debug=b --debug=m"
else
    case $speed in
    SLOW)
      flavour=slow-validate ;;
    NORMAL)
      flavour=validate ;;
    FAST)
      flavour=validate ;;
    esac
    $hadrian --flavour=$flavour
fi

check_packages post-build

bindistdir="bindisttest/install   dir"
ghc="$bindistdir/bin/ghc"

# -----------------------------------------------------------------------------
# Build and test a binary distribution (not --fast)

if [ $speed != "FAST" ]; then
    if [ "$use_hadrian" = "NO" ]
    then
	$make binary-dist-prep TAR_COMP=$tar_comp
	$make test_bindist TEST_PREP=YES TAR_COMP=$tar_comp
    else
	$hadrian binary-dist --docs=no-sphinx
	cfgdir=$(find $hadrian_build_root/bindist/ -name 'configure' | head -1)
	dir=$(dirname $cfgdir)
	cd "$dir"
	./configure --prefix="$thisdir/$bindistdir" && make install
	cd $thisdir
	"$ghc" -e 'Data.Text.IO.putStrLn (Data.Text.pack "bindist test: OK")'
    fi

    check_packages post-install

    if [ "$use_hadrian" = "NO" ]
    then
	$make validate_build_xhtml BINDIST_PREFIX="$thisdir/$bindistdir"
    else
        cd libraries/xhtml
        dynamicGhc=$("../../$ghc" --info | grep "GHC Dynamic" | cut -d',' -f3 | cut -d'"' -f2)
        if [ "$dynamicGhc" = "NO" ]
        then
            libFlags="--enable-shared --disable-library-vanilla"
        else
            libFlags="--disable-shared --enable-library-vanilla"
        fi
        libFlags="$libFlags --disable-library-prof"

       "../../$ghc" --make Setup
       ./Setup configure \
            --with-ghc="$thisdir/$ghc" \
            --with-haddock="$thisdir/$bindistdir/bin/haddock" \
            $libFlags \
		    --global --builddir=dist-bindist \
		    --prefix="$thisdir/$bindistdir"
	    ./Setup build --builddir=dist-bindist
	    ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist
	    ./Setup install --builddir=dist-bindist
	    ./Setup clean --builddir=dist-bindist
	    rm -f Setup Setup.exe Setup.hi Setup.o
	    cd ../../
    fi

    check_packages post-xhtml
fi

fi # testsuite-only

# -----------------------------------------------------------------------------
# Run the testsuite

if [ "$build_only" -eq 1 ]; then
    cat <<EOF
-------------------------------------------------------------------
Congratulations!  This tree has compiled successfully.

You can now test your new compiler using ./validate --testsuite-only.
EOF
    exit 0
fi

if [ "$hpc" = YES ]
then
    # XXX With threads we'd need to give a different tix file to each thread
    #     and then sum them up at the end
    threads=1
    HPCTIXFILE=$thisdir/testsuite/hpc_output/ghc.tix
    export HPCTIXFILE
    rm -f $HPCTIXFILE
fi

case "$speed" in
SLOW)
        MAKE_TEST_TARGET=slowtest
        BINDIST="BINDIST=YES"
	HADRIAN_TEST_SPEED=slow
        ;;
NORMAL)
        MAKE_TEST_TARGET=test
        BINDIST="BINDIST=YES"
	HADRIAN_TEST_SPEED=normal
        ;;
FAST)
        MAKE_TEST_TARGET=fasttest
        BINDIST="BINDIST=NO"
	HADRIAN_TEST_SPEED=fast
        ;;
esac

if [ $be_quiet -eq 1 ] && [ -z $VERBOSE ]; then
    TEST_VERBOSITY="VERBOSE=1"
fi

# We need to be quite picky on Windows about which Python interpreter we use
# (#12554, #12661). Allow the user to override it.
if [ "z$PYTHON" != "z" ]; then
    PYTHON_ARG="PYTHON=$PYTHON"
fi

rm -f testsuite_summary.txt testsuite_summary_stage1.txt

if [ "$use_hadrian" = "NO" ]
then
    # Use LOCAL=0, see Note [Running tests in /tmp].
    $make -C testsuite/tests $BINDIST $PYTHON_ARG \
	  $MAKE_TEST_TARGET stage=2 LOCAL=0 $TEST_VERBOSITY THREADS=$threads \
	  NO_PRINT_SUMMARY=YES SUMMARY_FILE=../../testsuite_summary.txt \
	  JUNIT_FILE=../../testsuite.xml \
	  2>&1 | tee testlog

    # Run a few tests using the stage1 compiler.
    # See Note [Why is there no stage1 setup function?].
    # Don't use BINDIST=YES, as stage1 is not available in a bindist.
    $make -C testsuite/tests/stage1 $PYTHON_ARG \
	  $MAKE_TEST_TARGET stage=1 LOCAL=0 $TEST_VERBOSITY THREADS=$threads \
	  NO_PRINT_SUMMARY=YES SUMMARY_FILE=../../../testsuite_summary_stage1.txt \
	  JUNIT_FILE=../../../testsuite_stage1.xml \
	  2>&1 | tee testlog-stage1
else
    testghc="$thisdir/$ghc"
    arg="test --test-speed=$HADRIAN_TEST_SPEED \
              --test-compiler=\"$testghc\" \
              --summary=$thisdir/testsuite_summary.txt \
              --summary-junit=$thisdir/testsuite.xml"
    sh -c "$hadrian $arg"
    # TODO: Run testsuite/tests/stage1 using the stage 1 compiler when
    # BINDIST=NO.
fi

echo
echo '==== STAGE 1 TESTS ==== '
cat testsuite_summary_stage1.txt

echo '==== STAGE 2 TESTS ==== '
cat testsuite_summary.txt

check_packages post-testsuite

if [ "$hpc" = YES ]
then
    utils/hpc/hpc markup --hpcdir=. --srcdir=compiler --srcdir=testsuite/hpc_output --destdir=testsuite/hpc_output testsuite/hpc_output/ghc.tix
fi

if
    grep '\<0 caused framework failures' testsuite_summary.txt >/dev/null 2>/dev/null &&
    grep '\<0 unexpected passes' testsuite_summary.txt >/dev/null 2>/dev/null &&
    grep '\<0 unexpected failures' testsuite_summary.txt >/dev/null 2>/dev/null &&
    grep '\<0 unexpected stat failures' testsuite_summary.txt >/dev/null 2>/dev/null &&

    grep '\<0 caused framework failures' testsuite_summary_stage1.txt >/dev/null 2>/dev/null &&
    grep '\<0 unexpected passes' testsuite_summary_stage1.txt >/dev/null 2>/dev/null &&
    grep '\<0 unexpected failures' testsuite_summary_stage1.txt >/dev/null 2>/dev/null &&
    grep '\<0 unexpected stat failures' testsuite_summary_stage1.txt >/dev/null 2>/dev/null ; then

    if [ $testsuite_only -eq 0 ] && [ $no_clean -eq 0 ]
    then
        cat <<EOF
-------------------------------------------------------------------
Congratulations!  This tree has passed minimal testing.

NOTE: If you have made changes that may cause failures not tested for by
the minimal testing procedure, please do further testing as necessary.

When you are satisfied that you haven't broken anything, go ahead and
push/send your patches.
EOF
        if [ -f mk/validate.mk ] && grep -q "^[^#]" mk/validate.mk
        then
            cat <<EOF

WARNING: You seem to have things set in mk/validate.mk. Please check
that it is OK before pushing.
EOF
        fi
        cat <<EOF
-------------------------------------------------------------------
EOF
    else
        cat <<EOF
-------------------------------------------------------------------
I didn't find any problems, but this wasn't a complete validate run,
so be careful!

NOTE: If you have made changes that may cause failures not tested for by
the minimal testing procedure, please do further testing as necessary.
-------------------------------------------------------------------
EOF
   fi
else
    if [ $be_quiet -eq 0 ]
    then
       cat <<EOF
-------------------------------------------------------------------
Oops!  Looks like you have some unexpected test results or framework failures.
Please fix them before pushing/sending patches.
-------------------------------------------------------------------
EOF
    fi
    exit 1
fi