autogen.sh

#!/bin/sh
#
# autogen.sh - Generates initial makefiles from a pristine source tree
#
# USAGE:
#   autogen.sh [configure options]
#
# Configuration is affected by environment variables as follows:
#
# DRYRUN
#  If set to any value it will do no configuring but  will emit the
#  programs that would be run.
#   e.g. DRYRUN=1 ./autogen.sh
#
# NOCONFIGURE
#  If set to any value it will generate all files but not invoke the
#  generated configure script.
#   e.g. NOCONFIGURE=1 ./autogen.sh
#
# AUTOMAKE ACLOCAL AUTOCONF AUTOHEADER LIBTOOLIZE GTKDOCIZE
#  If set (named after program) then this overrides any searching for
#  the programs on the current PATH.
#   e.g. AUTOMAKE=automake-1.7 ACLOCAL=aclocal-1.7 ./autogen.sh
#
# CONFIG_DIR (default ../config)
#  The directory where fresh GNU config.guess and config.sub can be
#  found for automatic copying in-place.
#
# PATH
#  Where the programs are searched for
#
# SRCDIR (default .)
#  Source directory
#
# This script is based on similar scripts used in various tools
# commonly made available via CVS and used with GNU automake.
# Try 'locate autogen.sh' on your system and see what you get.
#
# This script is in the public domain
#
# disabling these because the variables are defined in an eval.
# shellcheck disable=SC2034,SC2154

# Directory for the sources
SRCDIR=${SRCDIR-.}

# Where the GNU config.sub, config.guess might be found
CONFIG_DIR=${CONFIG_DIR-../config}

# GIT sub modules file
GITMODULES='.gitmodules'

autogen_get_version="$PWD/autogen-get-version.pl"
tmp1=$(mktemp)
trap 'rm -f $autogen_get_version $tmp1' 0 1


# The programs required for configuring which will be searched for
# in the current PATH.
# Set an envariable of the same name in uppercase, to override scan
#
programs="automake aclocal autoconf autoheader libtoolize"
gtkdoc_args=
ltdl_args=
silent_args=

# Using a temporary file for find output not find | while so we can
# change variables outside subshell
find "." -name "configure.ac" -print | \
  grep -v /releases/ > "$tmp1"
while IFS= read -r conf; do
  if grep "^GTK_DOC_CHECK" "$conf" >/dev/null; then
    programs="$programs gtkdocize"
    gtkdoc_args="--enable-gtk-doc"
  fi
  if grep "^AC_CHECK_PROGS.SWIG" "$conf" >/dev/null; then
    programs="$programs swig"
  fi
  if grep "^AC_LIBLTDL_" "$conf" >/dev/null; then
    ltdl_args="--ltdl"
  fi
  if grep "^AM_SILENT_RULES" "$conf" >/dev/null; then
    silent_args="--enable-silent-rules"
  fi
done < "$tmp1"

# Some dependencies for autotools:
# automake 1.13 requires autoconf 2.65
# automake 1.12 requires autoconf 2.62
# automake 1.11 requires autoconf 2.62 (needed for AM_SILENT_RULES)
automake_min_vers="011102"
aclocal_min_vers="$automake_min_vers"
autoconf_min_vers="026200"
autoheader_min_vers="$autoconf_min_vers"
# libtool 2.2 required for LT_INIT language fix
libtoolize_min_vers="020200"
gtkdocize_min_vers="010300"
swig_min_vers="010324"

# Default program arguments
automake_args="--gnu --add-missing --force --copy -Wall"
aclocal_args="-Wall"
autoconf_args="-Wall"
libtoolize_args="--force --copy --automake $ltdl_args"
gtkdocize_args="--copy"
# --enable-gtk-doc does no harm if it's not available
configure_args="--enable-maintainer-mode $gtkdoc_args $silent_args"


# You should not need to edit below here
######################################################################


# number comparisons may need a C locale
LANG=C
LC_NUMERIC=C


program=$(basename "$0")

if test -n "$DRYRUN"; then
  DRYRUN="echo"
fi

cat > autogen-get-version.pl <<EOF
use File::Basename;
my \$prog=basename \$0;
die "\$prog: USAGE PATH PROGRAM-NAME\n  e.g. \$prog /usr/bin/foo-123 foo\n"
  unless @ARGV==2;

my(\$path,\$name)=@ARGV;
exit 0 if !-f \$path;
die "\$prog: \$path not found\n" if !-r \$path;

# Remove leading g and make it optional for glibtoolize etc.
my \$mname=\$name; \$mname =~ s/^g//;

my(@vnums);
for my \$varg (qw(--version -version)) {
  my \$cmd="\$path \$varg";
  open(PIPE, "\$cmd 2>&1 |") || next;
  while(<PIPE>) {
    chomp;
    next if @vnums; # drain pipe if we got a vnums
    # Add optional leading g
    next unless /^g?\$mname/i;
    my(\$v)=/(\S+)\$/i; \$v =~ s/-.*\$//;
    @vnums=grep { defined \$_ && !/^\s*\$/} map { s/\D//g; \$_; } split(/\./, \$v);
  }
  close(PIPE);
  last if @vnums;
}

@vnums=(@vnums, 0, 0, 0)[0..2];
\$vn=join('', map { sprintf('%02d', \$_) } @vnums);
print "\$vn\n";
exit 0;
EOF



update_prog_version() {
  dir=$1
  prog=$2

  prog_name=
  prog_vers=
  prog_dir=

  # If there exists an envariable PROG in uppercase, use that and do not scan
  ucprog=$(echo "$prog" | tr '[:lower:]' '[:upper:]')
  env=
  eval "env=\$${ucprog}"
  if test -n "$env" ; then
    prog_name="$env"
    prog_vers=$(perl "$autogen_get_version" "$prog_name" "$prog")

    if test -z "$prog_vers"; then
      prog_vers=0
    fi
    prog_dir="environment variable $ucprog"
    # Set global variables
    eval "${prog}_name='${prog_name}'"
    eval "${prog}_vers='${prog_vers}'"
    eval "${prog}_dir='${prog_dir}'"
    return
  fi

  if test -x "$prog_vers"; then
    prog_vers=0
  fi

  nameglob="${prog}*"
  if [ -x /usr/bin/uname ]; then
    if [ "$(/usr/bin/uname)" = 'Darwin' ] && [ "$prog" = 'libtoolize' ] ; then
      nameglob="g${nameglob}"
    fi
  fi
  tmp=$(mktemp)
  # "portable" way to find only executable files/symlinks
  # OSX find does not have -executable or -perm /
  find "$dir" -name "$nameglob" -ls -prune 2>/dev/null | \
      awk '{if($3 ~/x/) { print $11}}' > "$tmp"
  while read -r name; do
    vers=$(perl "$autogen_get_version" "$name" "$prog")
    if expr "$vers" '>' "$prog_vers" >/dev/null; then
      prog_name="$name"
      prog_vers="$vers"
      prog_dir="$dir"
    fi
  done < "$tmp"
  rm -f "$tmp"

  if test -n "$prog_name"; then
      eval "${prog}_name='${prog_name}'"
      eval "${prog}_vers='${prog_vers}'"
      eval "${prog}_dir='${prog_dir}'"
  fi
}


check_prog_version() {
  prog=$1

  min=
  eval "min=\$${prog}_min_vers"

  eval "prog_name=\$${prog}_name"
  eval "prog_vers=\$${prog}_vers"
  eval "prog_dir=\$${prog}_dir"

  echo "$program: $prog program '$prog_name' V $prog_vers (min $min) in $prog_dir" 1>&2

  rc=1
  if test "$prog_vers" != 0; then
    if expr "$prog_vers" '<' "$min" >/dev/null; then
       echo "$program: ERROR: '$prog' version $prog_vers in $prog_dir is too old."
       echo "    (version $min or newer is required)"
       rc=0
    else
      # Things are ok, so set the ${prog} name
      eval "${prog}=${prog_name}"
    fi 
  else
    echo "$program: ERROR: You must have '$prog' installed to compile this package."
    echo "     (version $min or newer is required)"
    rc=0
  fi

  return $rc
}


# Find newest version of programs in the current PATH

echo "$program: Looking for programs: $programs"

tmp=$(mktemp)
echo "$PATH" | tr ':' '\012' > "$tmp"
while read -r dir; do
    if [ ! -d "$dir" ]; then
	continue
    fi

    for prog in $programs; do
	update_prog_version "$dir" "$prog"
    done
done < "$tmp"
rm -f "$tmp"

# END Find programs


# Check the versions meet the requirements
for prog in $programs; do
  if check_prog_version "$prog"; then
    exit 1
  fi
done

echo "$program: Dependencies satisfied"

if test -d "$SRCDIR/libltdl"; then
  touch "$SRCDIR/libltdl/NO-AUTO-GEN"
fi

config_dir=
if test -d "$CONFIG_DIR"; then
  config_dir=$(cd "$CONFIG_DIR" && pwd)
fi


# Initialise and/or update GIT submodules
if test -f "$GITMODULES" ; then
  echo " "
  modules=$(sed -n -e 's/^.*path = \(.*\)/\1/p' "$GITMODULES")
  for module in $modules; do
      count=$(find . -name "$module" -print | wc -l)
      if test "$count" -eq 0; then
	  echo "$program: Initializing git submodule in $module"
	  $DRYRUN git submodule init "$module"
      fi
  done
  echo "$program: Updating git submodules: $modules"
  $DRYRUN git submodule update
fi

here="$PWD"

find "$SRCDIR" -name configure.ac -print | \
  grep -v /releases/ > "$tmp1"
while IFS= read -r coin; do
  status=0
  dir=$(dirname "$coin")
  if test -f "$dir/NO-AUTO-GEN"; then
    echo "$program: Skipping $dir -- flagged as no auto-generation"
  else
    echo " "
    echo "$program: Processing directory $dir"
    cd "$dir" || exit 1

      # Ensure that these are created by the versions on this system
      # (indirectly via automake)
      $DRYRUN rm -f ltconfig ltmain.sh libtool stamp-h*
      # Made by automake
      $DRYRUN rm -f missing depcomp
      # automake junk
      $DRYRUN rm -rf autom4te*.cache

      config_macro_dir=$(sed -ne 's/^AC_CONFIG_MACRO_DIR(\([^)]*\).*/\1/p' configure.ac)
      if test -z "$config_macro_dir"; then
	config_macro_dir=.
      else
        aclocal_args="$aclocal_args -I $config_macro_dir "
      fi

      config_aux_dir=$(sed -ne 's/^AC_CONFIG_AUX_DIR(\([^)]*\).*/\1/p' configure.ac)
      if test -z "$config_aux_dir"; then
	config_aux_dir=.
      fi

      if test -n "$config_dir"; then
        echo "$program: Updating config.guess and config.sub"
	for file in config.guess config.sub; do
	  cfile="$config_dir/$file"
          xfile="$config_aux_dir/$file"
	  if test -f "$cfile"; then
	    $DRYRUN rm -f "$xfile"
	    $DRYRUN cp -p "$cfile" "$xfile"
	  fi
	done
      fi

      echo "$program: Running $libtoolize $libtoolize_args"
      $DRYRUN rm -f ltmain.sh libtool
      eval "$DRYRUN $libtoolize $libtoolize_args"
      status=$?
      if test "$status" != 0; then
	  break
      fi

      if grep "^GTK_DOC_CHECK" configure.ac >/dev/null; then
        # gtkdocize junk
        $DRYRUN rm -rf gtk-doc.make
        echo "$program: Running $gtkdocize $gtkdocize_args"
        eval "$DRYRUN $gtkdocize $gtkdocize_args"
        status=$?
	if test "$status" != 0; then
	    break
	fi
      fi

      for docs in NEWS README; do
	if test ! -f "$docs"; then
	  echo "$program: Creating empty $docs file to allow configure to work"
	  $DRYRUN touch -t 200001010000 "$docs"
	fi
      done

      echo "$program: Running $aclocal $aclocal_args"
      eval "$DRYRUN $aclocal $aclocal_args"
      if grep "^A[CM]_CONFIG_HEADER" configure.ac >/dev/null; then
	echo "$program: Running $autoheader"
	$DRYRUN "$autoheader"
        status=$?
	if test "$status" != 0; then
	    break
	fi
      fi
      echo "$program: Running $automake $automake_args"
      eval "$DRYRUN $automake $automake_args"
      status=$?
      if test "$status" != 0; then
	  break
      fi

      echo "$program: Running $autoconf $autoconf_args"
      eval "$DRYRUN $autoconf $autoconf_args"
      status=$?
      if test "$status" != 0; then
	  break
      fi
    cd "$here" || exit 1
  fi

  if test "$status" != 0; then
    echo "$program: FAILED to configure $dir"
    exit "$status"
  fi

done < "$tmp1"



rm -f config.cache

AUTOMAKE="$automake"
AUTOCONF="$autoconf"
ACLOCAL="$aclocal"
export AUTOMAKE AUTOCONF ACLOCAL

if test -z "$NOCONFIGURE"; then
  echo " "
  if test -z "$*"; then
    echo "$program: WARNING: Running 'configure' with no arguments."
    echo "If you wish to pass any to it, please specify them on the"
    echo "'$program' command line."
  fi

  echo "$program: Running ./configure $configure_args $*"
  if test -z "$DRYRUN"; then
    eval "$DRYRUN ./configure $configure_args $*" \
    && echo "$program: Now type 'make' to compile this package" || exit 1
  else
    $DRYRUN ./configure "$configure_args" "$*"
  fi
fi

exit "$status"