## K8S/DRIVER ATTRIBUTES
########################
# version: version of this values file
# Note: Do not change this value
version: "2.4.0"

# CSI driver log level
# Allowed values: "error", "warn"/"warning", "info", "debug"
# Default value: "debug"
logLevel: "debug"

# certSecretCount: Represents number of certificate secrets, which user is going to create for
# ssl authentication. (isilon-cert-0..isilon-cert-n)
# Allowed values: n, where n > 0
# Default value: None
certSecretCount: None 

# allowedNetworks: Custom networks for PowerScale export
#   Specify list of networks which can be used for NFS I/O traffic; CIDR format should be used.
# Allowed values: list of one or more networks
# Default value: None
# Examples: [192.168.1.0/24, 192.168.100.0/22]
allowedNetworks: []

# maxIsilonVolumesPerNode: Specify default value for maximum number of volumes that controller can publish to the node.
# If value is zero CO SHALL decide how many volumes of this type can be published by the controller to the node.
# This limit is applicable to all the nodes in the cluster for which node label 'max-isilon-volumes-per-node' is not set.
# Allowed values: n, where n >= 0
# Default value: 0
maxIsilonVolumesPerNode: 0

# imagePullPolicy: Policy to determine if the image should be pulled prior to starting the container.
# Allowed values:
#  Always: Always pull the image.
#  IfNotPresent: Only pull the image if it does not already exist on the node.
#  Never: Never pull the image.
# Default value: None
imagePullPolicy: IfNotPresent

# verbose: Indicates what content of the OneFS REST API message should be logged in debug level logs
# Allowed Values:
#   0: log full content of the HTTP request and response
#   1: log without the HTTP response body
#   2: log only 1st line of the HTTP request and response
# Default value: 0
verbose: 1

# Specify kubelet config dir path.
# Ensure that the config.yaml file is present at this path.
# Default value: None
kubeletConfigDir: /var/lib/kubelet

# enableCustomTopology: Specify if custom topology label <provisionerName>.dellemc.com/<powerscalefqdnorip>:<provisionerName>
# has to be used for making connection to backend PowerScale Array.
# If enableCustomTopology is set to true, then do not specify allowedTopologies in storage class.
# Allowed values:
#   true : enable custom topology
#   false: disable custom topology
# Default value: false
enableCustomTopology: false

# fsGroupPolicy: Defines if the underlying volume supports changing ownership and permission of the volume before being mounted.
# Allowed values:
#   ReadWriteOnceWithFSType: supports volume ownership and permissions change only if the fsType is defined
#   and the volume's accessModes contains ReadWriteOnce.
#   File: kubernetes may use fsGroup to change permissions and ownership of the volume 
#   to match user requested fsGroup in the pod's security policy regardless of fstype or access mode.
#   None: volumes will be mounted with no modifications.
# Default value: ReadWriteOnceWithFSType
fsGroupPolicy: ReadWriteOnceWithFSType

# podmonAPIPort: Defines the port to be used within the kubernetes cluster
# Allowed values:
#   Any valid and free port.
# Default value: 8083
podmonAPIPort: 8083

# maxPathLen: this parameter is used for setting the maximum Path length for the given volume.
# Default value: 192
# Examples: 192, 256
maxPathLen: 192

# controller: configure controller pod specific parameters
controller:
  # controllerCount: defines the number of csi-powerscale controller pods to deploy to
  # the Kubernetes release.
  # Allowed values: n, where n > 0
  # Default value: None
  controllerCount: 1

  # volumeNamePrefix: Prefix of PersistentVolume names created
  # Allowed values: string
  # Default value: None
  volumeNamePrefix: k8s

  # leaderElection: configure leader election parameters
  leaderElection:
    # Duration, that non-leader candidates will wait to force acquire leadership
    # Allowed values: Duration, in seconds. Must be greater than leaderElectionRenewDeadline
    # Default value: 15s
    leaderElectionLeaseDuration: 15s

    # Duration, that the acting leader will retry refreshing leadership before giving up
    # Allowed values: Duration, in seconds. Must be greater than leaderElectionRetryPeriod
    # Default value: 10s
    leaderElectionRenewDeadline: 10s

    # Duration, the LeaderElector clients should wait between tries of actions.
    # Allowed values: Duration, in seconds
    # Default value: 5s
    leaderElectionRetryPeriod: 5s

  # replication: allows to configure replication
  # Replication CRDs must be installed before installing driver
  replication:
    # enabled: Enable/Disable replication feature
    # Allowed values:
    #   true: enable replication feature(install dell-csi-replicator sidecar)
    #   false: disable replication feature(do not install dell-csi-replicator sidecar)
    # Default value: false
    enabled: false

    # image: Image to use for dell-csi-replicator. This shouldn't be changed
    # Allowed values: string
    # Default value: None
    image: dellemc/dell-csi-replicator:v1.3.0

    # replicationContextPrefix: prefix to use for naming of resources created by replication feature
    # Allowed values: string
    # Default value: powerstore
    replicationContextPrefix: "powerscale"

    # replicationPrefix: prefix to prepend to storage classes parameters
    # Allowed values: string
    # Default value: replication.storage.dell.com
    replicationPrefix: "replication.storage.dell.com"

  snapshot:
    # enabled: Enable/Disable volume snapshot feature
    # Allowed values:
    #   true: enable volume snapshot feature(install snapshotter sidecar)
    #   false: disable volume snapshot feature(do not install snapshotter sidecar)
    # Default value: None
    enabled: true

    # snapNamePrefix: Prefix to apply to the names of a created snapshots
    # Allowed values: string
    # Default value: None
    snapNamePrefix: snapshot

  resizer:
    # enabled: Enable/Disable volume expansion feature
    # Allowed values:
    #   true: enable volume expansion feature(install resizer sidecar)
    #   false: disable volume snapshot feature(do not install resizer sidecar)
    # Default value: None
    enabled: true

  healthMonitor:
    # enabled: Enable/Disable health monitor of CSI volumes- volume status, volume condition
    # Allowed values:
    #   true: enable checking of health condition of CSI volumes
    #   false: disable checking of health condition of CSI volumes
    # Default value: None
    enabled: false

    # interval: Interval of monitoring volume health condition
    # Allowed values: Number followed by unit of time (s,m,h)
    # Default value: 60s
    interval: 60s

  # nodeSelector: Define node selection constraints for pods of controller deployment.
  # For the pod to be eligible to run on a node, the node must have each
  # of the indicated key-value pairs as labels.
  # Leave as blank to consider all nodes
  # Allowed values: map of key-value pairs
  # Default value: None
  nodeSelector:
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/master taint
  #  node-role.kubernetes.io/master: ""
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/control-plane taint
  #  node-role.kubernetes.io/control-plane: ""

  # tolerations: Define tolerations for the controller deployment, if required.
  # Default value: None
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/master taint
  tolerations:
  # - key: "node-role.kubernetes.io/master"
  #   operator: "Exists"
  #   effect: "NoSchedule"
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/control-plane taint
  # tolerations:
  # - key: "node-role.kubernetes.io/control-plane"
  #   operator: "Exists"
  #   effect: "NoSchedule"

# node: configure node pod specific parameters
node:
  # nodeSelector: Define node selection constraints for pods of node daemonset
  # For the pod to be eligible to run on a node, the node must have each
  # of the indicated key-value pairs as labels.
  # Leave as blank to consider all nodes
  # Allowed values: map of key-value pairs
  # Default value: None
  nodeSelector:
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/master taint
  #  node-role.kubernetes.io/master: ""
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/control-plane taint
  #  node-role.kubernetes.io/control-plane: ""

  # tolerations: Define tolerations for the node daemonset, if required.
  # Default value: None
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/master taint
  tolerations:
  #  - key: "node.kubernetes.io/memory-pressure"
  #    operator: "Exists"
  #    effect: "NoExecute"
  #  - key: "node.kubernetes.io/disk-pressure"
  #    operator: "Exists"
  #    effect: "NoExecute"
  #  - key: "node.kubernetes.io/network-unavailable"
  #    operator: "Exists"
  #    effect: "NoExecute"
  # - key: "node-role.kubernetes.io/master"
  #   operator: "Exists"
  #   effect: "NoSchedule"
  # Uncomment if nodes you wish to use have the node-role.kubernetes.io/control-plane taint
  # tolerations:
  # - key: "node-role.kubernetes.io/control-plane"
  #   operator: "Exists"
  #   effect: "NoSchedule"

  # Uncomment if CSM for Resiliency and CSI Driver pods monitor are enabled
  #tolerations:
  #  - key: "offline.vxflexos.storage.dell.com"
  #    operator: "Exists"
  #    effect: "NoSchedule"
  #  - key: "vxflexos.podmon.storage.dell.com"
  #    operator: "Exists"
  #    effect: "NoSchedule"
  #  - key: "offline.unity.storage.dell.com"
  #    operator: "Exists"
  #    effect: "NoSchedule"
  #  - key: "unity.podmon.storage.dell.com"
  #    operator: "Exists"
  #    effect: "NoSchedule"
  #  - key: "offline.isilon.storage.dell.com"
  #    operator: "Exists"
  #    effect: "NoSchedule"
  #  - key: "isilon.podmon.storage.dell.com"
  #    operator: "Exists"
  #    effect: "NoSchedule"

  # dnsPolicy: Determines the DNS Policy of the Node service.
  # Allowed values:
  #   Default: The Pod inherits the name resolution configuration from the node that the pods run on.
  #   ClusterFirst: Any DNS query that does not match the configured cluster domain suffix, such as "www.kubernetes.io",
  #   is forwarded to the upstream nameserver inherited from the node.
  #   ClusterFirstWithHostNet:  For Pods running with hostNetwork, you should explicitly set this DNS policy.
  #   None: It allows a Pod to ignore DNS settings from the Kubernetes environment.
  #   All DNS settings are supposed to be provided using the dnsConfig field in the Pod Spec.
  # Default value: ClusterFirst
  # ClusterFirstWithHostNet is the recommended DNS policy.
  # Prior to v1.5 of the driver, the default DNS policy was ClusterFirst.
  # In certain scenarios, users might need to change the default dnsPolicy.
  dnsPolicy: ClusterFirstWithHostNet

  healthMonitor:
    # enabled: Enable/Disable health monitor of CSI volumes- volume usage, volume condition
    # Allowed values:
    #   true: enable checking of health condition of CSI volumes
    #   false: disable checking of health condition of CSI volumes
    # Default value: None
    enabled: false


## PLATFORM ATTRIBUTES
######################
# endpointPort: Specify the HTTPs port number of the PowerScale OneFS API server
# Formerly this attribute was named as "isiPort"
# This value acts as a default value for endpointPort, if not specified for a cluster config in secret
# If authorization is enabled, endpointPort must match the port specified in the endpoint parameter of the karavi-authorization-config secret
# Allowed value: valid port number
# Default value: 8080
endpointPort: 8080

# skipCertificateValidation: Specify whether the PowerScale OneFS API server's certificate chain and host name should be verified.
# Formerly this attribute was named as "isiInsecure"
# This value acts as a default value for skipCertificateValidation, if not specified for a cluster config in secret
# Allowed values:
#   true: skip OneFS API server's certificate verification
#   false: verify OneFS API server's certificates
# Default value: false
skipCertificateValidation: true

# isiAuthType: Indicates whether the authentication will be session-based or basic.
# Allowed values:
#   0: enables basic Authentication
#   1: enables session-based Authentication
# Default value: 0
isiAuthType: 0

# isiAccessZone: The name of the access zone a volume can be created in.
# If storageclass is missing with AccessZone parameter, then value of isiAccessZone is used for the same.
# Default value: System
# Examples: System, zone1
isiAccessZone: System

# enableQuota: Indicates whether the provisioner should attempt to set (later unset) quota
# on a newly provisioned volume.
# This requires SmartQuotas to be enabled on PowerScale cluster.
# Allowed values:
#   true: set quota for volume
#   false: do not set quota for volume
enableQuota: true

# isiPath: The base path for the volumes to be created on PowerScale cluster.
# This value acts as a default value for isiPath, if not specified for a cluster config in secret
# Ensure that this path exists on PowerScale cluster.
# Allowed values: unix absolute path
# Default value: /ifs
# Examples: /ifs/data/csi, /ifs/engineering
isiPath: /ifs/data/csi

# isiVolumePathPermissions: The permissions for isi volume directory path
# This value acts as a default value for isiVolumePathPermissions, if not specified for a cluster config in secret
# Allowed values: valid octal mode number
# Default value: "0777"
# Examples: "0777", "777", "0755"
isiVolumePathPermissions: "0777"

# noProbeOnStart: Indicates whether the controller/node should probe all the PowerScale clusters during driver initialization
# When set to true, the driver will not set node labels, please manually add
# the label <provisionerName>.dellemc.com/<powerscalefqdnorip>:<provisionerName> on the nodes for each of the clusters reachable from the node.
# Allowed values:
#   true : do not probe all PowerScale clusters during driver initialization
#   false: probe all PowerScale clusters during driver initialization
# Default value: false
noProbeOnStart: false

# autoProbe: automatically probe the PowerScale cluster if not done already during CSI calls.
# Allowed values:
#   true : enable auto probe.
#   false: disable auto probe.
# Default value: false
autoProbe: true

authorization:
  enabled: false
  # sidecarProxyImage: the container image used for the csm-authorization-sidecar.
  # Default value: dellemc/csm-authorization-sidecar:v1.4.0
  sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.4.0
  # proxyHost: hostname of the csm-authorization server
  # Default value: None
  proxyHost:
  # skipCertificateValidation: certificate validation of the csm-authorization server
  # Allowed Values:
  #   "true" - TLS certificate verification will be skipped
  #   "false" - TLS certificate will be verified 
  # Default value: "true" 
  skipCertificateValidation: true

# Enable this feature only after contact support for additional information
podmon:
  enabled: false
  image: dellemc/podmon:v1.3.0
  #controller:
  #  args:
  #    - "--csisock=unix:/var/run/csi/csi.sock"
  #    - "--labelvalue=csi-isilon"
  #    - "--arrayConnectivityPollRate=60"
  #    - "--driverPath=csi-isilon.dellemc.com"
  #    - "--mode=controller"
  #    - "--skipArrayConnectionValidation=false"
  #    - "--driver-config-params=/csi-isilon-config-params/driver-config-params.yaml"
  #    - "--driverPodLabelValue=dell-storage"
  #node:
  #  args:
  #    - "--csisock=unix:/var/lib/kubelet/plugins/csi-isilon/csi_sock"
  #    - "--labelvalue=csi-isilon"
  #    - "--arrayConnectivityPollRate=60"
  #    - "--driverPath=csi-isilon.dellemc.com"
  #    - "--mode=node"
  #    - "--leaderelection=false"
  #    - "--driver-config-params=/csi-isilon-config-params/driver-config-params.yaml"
  #    - "--driverPodLabelValue=dell-storage"

encryption:
  # enabled: Enable/disable volume encryption feature.
  enabled: false

  # pluginName: The name of the provisioner to use for encrypted volumes.
  pluginName: "sec-isilon.dellemc.com"

  # image: Encryption driver image name.
  image: "dellemc/csm-encryption:v0.1.0"

  # imagePullPolicy: If specified, overrides the chart global imagePullPolicy.
  imagePullPolicy:

  # logLevel: Log level of the encryption driver.
  # Allowed values: "error", "warning", "info", "debug", "trace".
  logLevel: "error"
  
  # livenessPort: HTTP liveness probe port number. 
  # Leave empty to disable the liveness probe.
  # Example: 8080
  livenessPort:

  # extraArgs: Extra command line parameters to pass to the encryption driver.
  # Allowed values:
  # --sharedStorage - may be required by some applications to work properly.
  # When set, performance is reduced and hard links cannot be created.
  # See the gocryptfs documentation for more details.
  extraArgs: []