Skip to content

Latest commit

 

History

History
36 lines (31 loc) · 2.57 KB

README.md

File metadata and controls

36 lines (31 loc) · 2.57 KB

NPM

zigbee-herdsman-converters

Collection of device converters to be used with zigbee-herdsman.

Contributing

See Zigbee2MQTT how to support new devices.

Submitting a pull request

If you'd like to submit a pull request, you should run the following commands to ensure your changes will pass the tests:

npm run lint
npm test

If any of those commands finish with an error your PR won't pass the tests and will likely be rejected.

Documentation of definition meta property

  • multiEndpoint: enables the multi endpoint functionallity in e.g. fromZigbee.on_off, example: normally this converter would return {"state": "OFF"}, when multiEndpoint is enabled the 'endpoint' method of the device definition will be called to determine the endpoint name which is then used as key e.g. {"state_left": "OFF"}. Only needed when device sends the same attribute from multiple endpoints. (default: false)
  • disableDefaultResponse: used by toZigbee converters to disable the default response of some devices as they don't provide one. (default: false)
  • applyRedFix: see toZigbee.light_color (default: false)
  • enhancedHue: see toZigbee.light_color (default: true)
  • supportsHueAndSaturation: see toZigbee.light_color (default: false)
  • timeout: timeout for commands to this device used in toZigbee. (default: 10000)
  • coverInverted: Set to true for cover controls that report position=100 as open (default: false)
  • coverStateFromTilt: Set cover state based on tilt
  • turnsOffAtBrightness1: Indicates light turns off when brightness 1 is set (default: false)
  • pinCodeCount: Amount of pincodes the lock can handle
  • disableActionGroup: Prevents some converters adding the action_group to the payload (default: false)
  • tuyaThermostatSystemMode/tuyaThermostatPreset: TuYa specific thermostat options
  • thermostat: see e.g. HT-08 definition
    • {dontMapPIHeatingDemand: true}: do not map piHeatingDemand from 0-255 -> 0-100, see fromZigbee.thermostat (default: false)
  • battery:
    • {dontDividePercentage: true}: prevents batteryPercentageRemainig from being divided (ZCL 200=100%, but some report 100=100%) (default: false)
    • {voltageToPercentage: '3V_2100'}: convert voltage to percentage using specified option. See utils.batteryVoltageToPercentage() (default: null, no voltage to percentage conversion)
  • fanStateOn: value used for fan_mode when using fan_state="ON", the default is "on"