dk

#!/bin/sh
##########################################################################
# File: dkcoder/dk                                                       #
#                                                                        #
# Copyright 2023 Diskuv, Inc.                                            #
#                                                                        #
# Licensed under the Open Software License version 3.0                   #
# (the "License"); you may not use this file except in compliance        #
# with the License. You may obtain a copy of the License at              #
#                                                                        #
#     https://opensource.org/license/osl-3-0-php/                        #
#                                                                        #
##########################################################################

# Recommendation: Place this file in source control.
# Auto-generated by `./dk dksdk.project.new` of dkcoder.
#
# Invoking: ./dk
#   That works in Powershell on Windows, and in Unix. Copy-and-paste works!
#
# Purpose: Install CMake if not already. Then invoke CMake.

set -euf

dk_pwd=$PWD

# --- Quiet mode detection ---
# Any command like ./dk DkRun_V0_1.RunQuiet that ends in "Quiet".
# However, for user safety won't quiet a command if `sudo` is required.

DKCODER_FORCE_QUIET=
run_maybe_quiet() {
  "$@" >&2 # Always redirect stdout to stderr in this script
}
printf_maybe_quiet() {
  # shellcheck disable=SC2059
  printf "$@" >&2
}

if [ $# -ge 1 ]; then
  case "$1" in
    *Quiet)
      DKCODER_FORCE_QUIET=true
      run_maybe_quiet() {
        "$@" > /dev/null 2> /dev/null
      }
      printf_maybe_quiet() {
        true
      }
  esac
fi

# --- Imports of dkml-runtime-common's crossplatform-functions.sh ---
# Changes:
# 1. In download_file() use [ "${DKCODER_FORCE_QUIET:-}" = true ]
# 2. In log_trace() replace non-FATAL `printf ... >&2` with `printf_maybe_quiet ...`
# 3. In sha256check() all shasum/* use --quiet option (this should be upstreamed)

# Get standard locations of Unix system binaries like `/usr/bin/mv` (or `/bin/mv`).
#
# Will not return anything in `/usr/local/bin` or `/usr/sbin`. Use when you do not
# know whether the PATH has been set correctly, or when you do not know if the
# system binary exists.
#
# At some point in the future, this function will error out if the required system binaries
# do not exist. Most system binaries are common to all Unix/Linux/macOS installations but
# some (like `comm`) may need to be installed for proper functioning of DKML.
#
# Outputs:
# - env:DKMLSYS_MV - Location of `mv`
# - env:DKMLSYS_CHMOD - Location of `chmod`
# - env:DKMLSYS_UNAME - Location of `uname`
# - env:DKMLSYS_ENV - Location of `env`
# - env:DKMLSYS_AWK - Location of `awk`
# - env:DKMLSYS_SED - Location of `sed`
# - env:DKMLSYS_COMM - Location of `comm`
# - env:DKMLSYS_INSTALL - Location of `install`
# - env:DKMLSYS_RM - Location of `rm`
# - env:DKMLSYS_SORT - Location of `sort`
# - env:DKMLSYS_CAT - Location of `cat`
# - env:DKMLSYS_STAT - Location of `stat`
# - env:DKMLSYS_GREP - Location of `grep`
# - env:DKMLSYS_CURL - Location of `curl` (empty if not found)
# - env:DKMLSYS_WGET - Location of `wget` (empty if not found)
# - env:DKMLSYS_TR - Location of `tr`
autodetect_system_binaries() {
    if [ -z "${DKMLSYS_MV:-}" ]; then
        if [ -x /usr/bin/mv ]; then
            DKMLSYS_MV=/usr/bin/mv
        else
            DKMLSYS_MV=/bin/mv
        fi
    fi
    if [ -z "${DKMLSYS_CHMOD:-}" ]; then
        if [ -x /usr/bin/chmod ]; then
            DKMLSYS_CHMOD=/usr/bin/chmod
        else
            DKMLSYS_CHMOD=/bin/chmod
        fi
    fi
    if [ -z "${DKMLSYS_UNAME:-}" ]; then
        if [ -x /usr/bin/uname ]; then
            DKMLSYS_UNAME=/usr/bin/uname
        else
            DKMLSYS_UNAME=/bin/uname
        fi
    fi
    if [ -z "${DKMLSYS_ENV:-}" ]; then
        if [ -x /usr/bin/env ]; then
            DKMLSYS_ENV=/usr/bin/env
        else
            DKMLSYS_ENV=/bin/env
        fi
    fi
    if [ -z "${DKMLSYS_AWK:-}" ]; then
        if [ -x /usr/bin/awk ]; then
            DKMLSYS_AWK=/usr/bin/awk
        else
            DKMLSYS_AWK=/bin/awk
        fi
    fi
    if [ -z "${DKMLSYS_SED:-}" ]; then
        if [ -x /usr/bin/sed ]; then
            DKMLSYS_SED=/usr/bin/sed
        else
            DKMLSYS_SED=/bin/sed
        fi
    fi
    if [ -z "${DKMLSYS_COMM:-}" ]; then
        if [ -x /usr/bin/comm ]; then
            DKMLSYS_COMM=/usr/bin/comm
        else
            DKMLSYS_COMM=/bin/comm
        fi
    fi
    if [ -z "${DKMLSYS_INSTALL:-}" ]; then
        if [ -x /usr/bin/install ]; then
            DKMLSYS_INSTALL=/usr/bin/install
        else
            DKMLSYS_INSTALL=/bin/install
        fi
    fi
    if [ -z "${DKMLSYS_RM:-}" ]; then
        if [ -x /usr/bin/rm ]; then
            DKMLSYS_RM=/usr/bin/rm
        else
            DKMLSYS_RM=/bin/rm
        fi
    fi
    if [ -z "${DKMLSYS_SORT:-}" ]; then
        if [ -x /usr/bin/sort ]; then
            DKMLSYS_SORT=/usr/bin/sort
        else
            DKMLSYS_SORT=/bin/sort
        fi
    fi
    if [ -z "${DKMLSYS_CAT:-}" ]; then
        if [ -x /usr/bin/cat ]; then
            DKMLSYS_CAT=/usr/bin/cat
        else
            DKMLSYS_CAT=/bin/cat
        fi
    fi
    if [ -z "${DKMLSYS_STAT:-}" ]; then
        if [ -x /usr/bin/stat ]; then
            DKMLSYS_STAT=/usr/bin/stat
        else
            DKMLSYS_STAT=/bin/stat
        fi
    fi
    if [ -z "${DKMLSYS_GREP:-}" ]; then
        if [ -x /usr/bin/grep ]; then
            DKMLSYS_GREP=/usr/bin/grep
        else
            DKMLSYS_GREP=/bin/grep
        fi
    fi
    if [ -z "${DKMLSYS_CURL:-}" ]; then
        if [ -x /usr/bin/curl ]; then
            DKMLSYS_CURL=/usr/bin/curl
        elif [ -x /bin/curl ]; then
            DKMLSYS_CURL=/bin/curl
        else
            DKMLSYS_CURL=
        fi
    fi
    if [ -z "${DKMLSYS_WGET:-}" ]; then
        if [ -x /usr/bin/wget ]; then
            DKMLSYS_WGET=/usr/bin/wget
        elif [ -x /bin/wget ]; then
            DKMLSYS_WGET=/bin/wget
        else
            DKMLSYS_WGET=
        fi
    fi
    if [ -z "${DKMLSYS_TR:-}" ]; then
        if [ -x /usr/bin/tr ]; then
            DKMLSYS_TR=/usr/bin/tr
        else
            DKMLSYS_TR=/bin/tr
        fi
    fi
    export DKMLSYS_MV DKMLSYS_CHMOD DKMLSYS_UNAME DKMLSYS_ENV DKMLSYS_AWK DKMLSYS_SED DKMLSYS_COMM DKMLSYS_INSTALL
    export DKMLSYS_RM DKMLSYS_SORT DKMLSYS_CAT DKMLSYS_STAT DKMLSYS_GREP DKMLSYS_CURL DKMLSYS_WGET DKMLSYS_TR
}

# Is a Windows build machine if we are in a MSYS2 or Cygwin environment.
#
# Better alternatives
# -------------------
#
# 1. If you are checking to see if you should do a cygpath, then just guard it
#    like so:
#       if [ -x /usr/bin/cygpath ]; then
#           do_something $(/usr/bin/cygpath ...) ...
#       fi
#    This clearly guards what you are about to do (cygpath) with what you will
#    need (cygpath).
# 2. is_arg_windows_platform
is_unixy_windows_build_machine() {
    if is_msys2_msys_build_machine || is_cygwin_build_machine; then
        return 0
    fi
    return 1
}

# Is a MSYS2 environment with the MSYS or MINGW64 subsystem?
# * MSYS2 can also do MinGW 32-bit and 64-bit subsystems. Used by Diskuv OCaml
# * MINGW64 used by Git Bash (aka. GitHub Actions `shell: bash`)
# https://www.msys2.org/docs/environments/
is_msys2_msys_build_machine() {
    if [ -e /usr/bin/msys-2.0.dll ] && {
        [ "${MSYSTEM:-}" = "MSYS" ] || [ "${MSYSTEM:-}" = "MINGW64" ] || [ "${MSYSTEM:-}" = "UCRT64" ] || [ "${MSYSTEM:-}" = "CLANG64" ] || [ "${MSYSTEM:-}" = "MINGW32" ] || [ "${MSYSTEM:-}" = "CLANG32" ] || [ "${MSYSTEM:-}" = "CLANGARM64" ]
    }; then
        return 0
    fi
    return 1
}

is_cygwin_build_machine() {
    if [ -e /usr/bin/cygwin1.dll ]; then
        return 0
    fi
    return 1
}

# Tries to find the host ABI.
#
# Beware: This function uses `uname` probing may be inaccurate for dual-arch
# CPUs like Apple Silicon with Rosetta.
#
# Inputs:
# - env:DKML_HOST_ABI - Optional but recommended. If set, then BUILDHOST_ARCH will be set to the same.
#
# Outputs:
# - env:BUILDHOST_ARCH will contain the host ABI.
autodetect_buildhost_arch() {
    if [ -n "${DKML_HOST_ABI:-}" ]; then
        BUILDHOST_ARCH=$DKML_HOST_ABI
    else
        # Set DKMLSYS_*
        autodetect_system_binaries

        autodetect_buildhost_arch_SYSTEM=$("$DKMLSYS_UNAME" -s)
        autodetect_buildhost_arch_MACHINE=$("$DKMLSYS_UNAME" -m)
        # list from https://en.wikipedia.org/wiki/Uname and https://stackoverflow.com/questions/45125516/possible-values-for-uname-m
        case "${autodetect_buildhost_arch_SYSTEM}-${autodetect_buildhost_arch_MACHINE}" in
            Linux-armv7*)
                BUILDHOST_ARCH=linux_arm32v7;;
            Linux-armv6* | Linux-arm)
                BUILDHOST_ARCH=linux_arm32v6;;
            Linux-aarch64 | Linux-arm64 | Linux-armv8*)
                BUILDHOST_ARCH=linux_arm64;;
            Linux-i386 | Linux-i686)
                BUILDHOST_ARCH=linux_x86;;
            Linux-x86_64)
                BUILDHOST_ARCH=linux_x86_64;;
            Darwin-arm64)
                BUILDHOST_ARCH=darwin_arm64;;
            Darwin-x86_64)
                BUILDHOST_ARCH=darwin_x86_64;;
            *-i386 | *-i686)
                if is_unixy_windows_build_machine; then
                    BUILDHOST_ARCH=windows_x86
                else
                    printf "%s\n" "FATAL: Unsupported build machine type obtained from 'uname -s' and 'uname -m': $autodetect_buildhost_arch_SYSTEM and $autodetect_buildhost_arch_MACHINE" >&2
                    exit 1
                fi
                ;;
            *-x86_64)
                if is_unixy_windows_build_machine; then
                    BUILDHOST_ARCH=windows_x86_64
                else
                    printf "%s\n" "FATAL: Unsupported build machine type obtained from 'uname -s' and 'uname -m': $autodetect_buildhost_arch_SYSTEM and $autodetect_buildhost_arch_MACHINE" >&2
                    exit 1
                fi
                ;;
            *)
                # Since:
                # 1) MSYS2 does not run on ARM/ARM64 (https://www.msys2.org/docs/environments/)
                # 2) MSVC does not use ARM/ARM64 as host machine (https://docs.microsoft.com/en-us/cpp/build/building-on-the-command-line?view=msvc-160)
                # we do not support Windows ARM/ARM64 as a build machine
                printf "%s\n" "FATAL: Unsupported build machine type obtained from 'uname -s' and 'uname -m': $autodetect_buildhost_arch_SYSTEM and $autodetect_buildhost_arch_MACHINE" >&2
                exit 1
                ;;
        esac
    fi
}

# A function that will try to print an ISO8601 timestamp, but will fallback to
# the system default. Always uses UTC timezone.
try_iso8601_timestamp() {
    date -u -Iseconds 2>/dev/null || TZ=UTC date
}

# A function that will print the command and possibly time it (if and only if it uses a full path to
# an executable, so that 'time' does not fail on internal shell functions).
# If --return-error-code is the first argument or LOG_TRACE_RETURN_ERROR_CODE=ON, then instead of exiting the
# function will return the error code.
log_trace() {
    log_trace_RETURN=${LOG_TRACE_RETURN_ERROR_CODE:-OFF}

    log_trace_1="$1"
    if [ "$log_trace_1" = "--return-error-code" ]; then
        shift
        log_trace_RETURN=ON
    fi

    if [ "${DKML_BUILD_TRACE:-OFF}" = ON ]; then
        printf_maybe_quiet "[%s] %s\n" "$(try_iso8601_timestamp)" "+ $*"
        if [ -x "$1" ]; then
            time "$@"
        else
            "$@"
        fi
    else
        # use judgement so we essentially have log at an INFO level
        case "$1" in
        rm|cp)
            # debug level. only show when DKML_BUILD_TRACE=ON
            ;;
        git|make|ocaml_configure|ocaml_make|make_host|make_target)
            # info level. and can show entire command without polluting the screen
            printf_maybe_quiet "[%s] %s\n" "$(try_iso8601_timestamp)" "$*"
            ;;
        *)  printf_maybe_quiet "[%s] %s\n" "$(try_iso8601_timestamp)" "$1"
        esac
        "$@"
    fi
    log_trace_ec="$?"
    if [ "$log_trace_ec" -ne 0 ]; then
        if [ "$log_trace_RETURN" = ON ]; then
            return "$log_trace_ec"
        else
            printf "FATAL: Command failed with exit code %s: %s\n" "$log_trace_ec" "$*" >&2
            exit "$log_trace_ec"
        fi
    fi
}

# [sha256compute FILE] writes the SHA256 checksum (hex encoded) of file FILE to the standard output.
sha256compute() {
    sha256compute_FILE="$1"
    shift
    # For reasons unclear doing the following in MSYS2:
    #   sha256sum 'Z:\source\README.md'
    # will produce a backslash like:
    #   \5518c76ed7234a153941fb7bc94b6e91d9cb8f1c4e22daf169a59b5878c3fc8a *Z:\\source\\README.md
    # So always cygpath the filename if available
    if [ -x /usr/bin/cygpath ]; then
        sha256compute_FILE=$(/usr/bin/cygpath -a "$sha256compute_FILE")
    fi

    autodetect_system_binaries
    if [ -x /usr/bin/shasum ]; then # macOS, OpenBSD, Debian
        # CODESITE #1 (duplicates elsewhere).
        # On Debian shasum is a perl script, and perl needs locale settings or it will complain.
        # Confer: https://www.thomas-krenn.com/en/wiki/Perl_warning_Setting_locale_failed_in_Debian
        # Confer: https://stackoverflow.com/a/52004330/21513816
        #   shellcheck disable=SC2016
        LC_ALL=C /usr/bin/shasum -a 256 "$sha256compute_FILE" | "$DKMLSYS_AWK" '{print $1}'
    elif [ -x /usr/bin/sha256sum ]; then # Linux, MSYS2
        #   shellcheck disable=SC2016
        /usr/bin/sha256sum "$sha256compute_FILE" | "$DKMLSYS_AWK" '{print $1}'
    elif [ -x /sbin/sha256 ]; then # FreeBSD
        #   shellcheck disable=SC2016
        /sbin/sha256 -r "$sha256compute_FILE" | "$DKMLSYS_AWK" '{print $1}'
    else
        printf "FATAL: %s\n" "No sha256 checksum utility found" >&2
        exit 107
    fi
}

# [sha256check FILE SUM] checks that the file FILE has a SHA256 checksum (hex encoded) of SUM.
# The function will return nonzero (and exit with failure if `set -e` is enabled) if the checksum does not match.
sha256check() {
    sha256check_FILE="$1"
    shift
    sha256check_SUM="$1"
    shift

    if [ -x /usr/bin/shasum ]; then # macOS, OpenBSD, Debian
        # CODESITE #1 (duplicates elsewhere).
        # On Debian shasum is a perl script, and perl needs locale settings or it will complain.
        # Confer: https://www.thomas-krenn.com/en/wiki/Perl_warning_Setting_locale_failed_in_Debian
        # Confer: https://stackoverflow.com/a/52004330/21513816
        # Note: shasum 5.96 (ex. conanio/gcc7:1.64.1) has no --quiet option.
        #   shellcheck disable=SC2016
        printf "%s  %s" "$sha256check_SUM" "$sha256check_FILE" | LC_ALL=C /usr/bin/shasum -a 256 -c >&2
    elif [ -x /usr/bin/sha256sum ]; then # Linux, MSYS2
        # Note: BusyBox v1.35.0 sha256sum has no --quiet option.
        printf "%s  %s" "$sha256check_SUM" "$sha256check_FILE" | /usr/bin/sha256sum -c >&2
    elif [ -x /sbin/sha256 ]; then # FreeBSD
        /sbin/sha256 --quiet -c "$sha256check_SUM" "$sha256check_FILE" >&2
    else
        printf "FATAL: %s\n" "No sha256 checksum utility found" >&2

        # REMOVEME!
        if [ -d /sbin ]; then printf "/sbin:\n" >&2; ls /sbin >&2; fi
        if [ -d /usr/sbin ]; then printf "/usr/sbin:\n" >&2; ls /usr/sbin >&2; fi
        if [ -d /bin ]; then printf "/bin:\n" >&2; ls /bin >&2; fi
        if [ -d /usr/bin ]; then printf "/usr/bin:\n" >&2; ls /usr/bin >&2; fi

        exit 107
    fi
}

# [downloadfile URL FILE SUM] downloads from URL into FILE and verifies the SHA256 checksum of SUM.
# If the FILE already exists with the correct checksum it is not redownloaded.
# The function will exit with failure if the checksum does not match.
downloadfile() {
    downloadfile_URL="$1"
    shift
    downloadfile_FILE="$1"
    shift
    downloadfile_SUM="$1"
    shift

    # Set DKMLSYS_*
    autodetect_system_binaries

    if [ -e "$downloadfile_FILE" ]; then
        if sha256check "$downloadfile_FILE" "$downloadfile_SUM"; then
            return 0
        else
            $DKMLSYS_RM -f "$downloadfile_FILE"
        fi
    fi
    if [ "${CI:-}" = true ] || [ "${DKCODER_FORCE_QUIET:-}" = true ]; then
        if [ -n "$DKMLSYS_CURL" ]; then
            log_trace "$DKMLSYS_CURL" -L -s "$downloadfile_URL" -o "$downloadfile_FILE".tmp
        elif [ -n "$DKMLSYS_WGET" ]; then
            log_trace "$DKMLSYS_WGET" -q -O "$downloadfile_FILE".tmp "$downloadfile_URL"
        else
            echo "No curl or wget available on the system paths" >&2
            exit 107
        fi
    else
        if [ -n "$DKMLSYS_CURL" ]; then
            log_trace "$DKMLSYS_CURL" -L "$downloadfile_URL" -o "$downloadfile_FILE".tmp
        elif [ -n "$DKMLSYS_WGET" ]; then
            log_trace "$DKMLSYS_WGET" -O "$downloadfile_FILE".tmp "$downloadfile_URL"
        else
            echo "No curl or wget available on the system paths" >&2
            exit 107
        fi
    fi
    if ! sha256check "$downloadfile_FILE".tmp "$downloadfile_SUM"; then
        printf "%s\n" "FATAL: Encountered a corrupted or compromised download from $downloadfile_URL" >&2
        exit 1
    fi
    $DKMLSYS_MV "$downloadfile_FILE".tmp "$downloadfile_FILE"
}

# End import
# ---------------------------------------------------------------------------

# --- Environment detection ---

# Set DKMLSYS_*
autodetect_system_binaries

# Find host ABI. Set in BUILDHOST_ARCH
autodetect_buildhost_arch

# Use the project tree as the current directory
PROJ_DIR=$(dirname "$0")
PROJ_DIR=$(cd "$PROJ_DIR" && pwd)
cd "$PROJ_DIR"

# --- DkCoder data home ---

tools_dir=
tools_name=dkcoder
#   1. Check DKCODER_DATA_HOME environment variable.
if [ -z "$tools_dir" ] && [ -n "${DKCODER_DATA_HOME:-}" ]; then
  install -d "$DKCODER_DATA_HOME"
  tools_dir="$DKCODER_DATA_HOME"
fi
#   2. Check if CI since many CI providers can only cache content in a subdirectory
#      of the project.
if [ -z "$tools_dir" ] && [ "${CI:-}" = true ]; then
  install -d "$PROJ_DIR/.z-dk/tools"
  tools_dir="$PROJ_DIR/.z-dk/tools"
fi
#   3. Check in locations rooted under /opt/diskuv
#      We look under a /opt/diskuv early because
#      - Especially important for WSL2 to use a pure Linux filesystem (ext4) for
#        best performance.
#      - Using a canonical location (especially /opt/diskuv/usr/share) makes
#        it easy to use CMake presets for non-Windows hosts.
if [ -z "$tools_dir" ] && [ -n "${XDG_DATA_HOME:-}" ] && [ -w "/opt/diskuv/$XDG_DATA_HOME" ]; then
  install -d "/opt/diskuv/$XDG_DATA_HOME/$tools_name"
  tools_dir="/opt/diskuv/$XDG_DATA_HOME/$tools_name"
fi
if [ -z "$tools_dir" ] && [ -n "${HOME:-}" ] && [ -w "/opt/diskuv/$HOME" ]; then
  install -d "/opt/diskuv/$HOME/.local/share/$tools_name"
  tools_dir="/opt/diskuv/$HOME/.local/share/$tools_name"
fi
if [ -z "$tools_dir" ] && [ -w "/opt/diskuv/usr/share" ]; then
  install -d "/opt/diskuv/usr/share/$tools_name"
  tools_dir="/opt/diskuv/usr/share/$tools_name"
fi
#   4. Check in the conventional locations rooted under /
if [ -z "$tools_dir" ] && [ -n "${XDG_DATA_HOME:-}" ] && [ -w "$XDG_DATA_HOME" ]; then
  install -d "$XDG_DATA_HOME/$tools_name"
  tools_dir="$XDG_DATA_HOME/$tools_name"
fi
if [ -z "$tools_dir" ] && [ -n "${HOME:-}" ] && [ -w "$HOME" ]; then
  install -d "$HOME/.local/share/$tools_name"
  tools_dir="$HOME/.local/share/$tools_name"
fi
#   5. Validate
if [ -z "$tools_dir" ]; then
  echo "FATAL: Could not find a location to install DkCoder." >&2
  echo "  ...: Make sure you have a home directory and that it is write-able, or define" >&2
  echo "  ...: the environment variable XDG_DATA_HOME in a shell profile script after" >&2
  echo "  ...: creating the \$XDG_DATA_HOME directory." >&2
  exit 2
fi

# --- Tool downloads and installs ---

# PREREQS
# -------

cmake_majmin_ver=3.25
cmake_majminpat_ver=3.25.2
cmake_cksum256_darwin_universal="a988e2a69c1d105987f12782ee0fa80d6be941b3e1a68b4bd6a661f0fdb56d75"
cmake_cksum256_linux_arm64="98cbec4d939adecc0a52b0bf2d537ebbcd629f9ac4d935b399619faa4d4f0d44"
cmake_cksum256_linux_x86_64="6fc551dcd74ca93e155b54b5537f5659e072031e8dc07160b9d4e92f5ee375b8"
cmake_cksum256_linux_x86="0e4b95fd912896e5f85480a2c0a09e863d4f6d44acf1e5070ef257fe041d1d0c"

ninja_majminpat_ver=1.12.1
ninja_cksum256_darwin_universal="89a287444b5b3e98f88a945afa50ce937b8ffd1dcc59c555ad9b1baf855298c9"
ninja_cksum256_linux_arm64="70d0c5f7dfc0d2aa6af85b1190e75cd01275d2cb9f010df227256829c92a8ee3"
ninja_cksum256_linux_x86_64="7223fda005b060cec765868576c0db5035fdb8fa1cce2d89ab9ca95045e55122"
ninja_cksum256_linux_x86="abe169ccb576c9983537cf94fd144b36f9f3ce712f240ced45ad9488399c7e29"

install_linux_prog() {
  install_linux_prog_NAME=$1
  shift
  install_linux_prog_PKG=$1
  shift
  install_linux_prog_ALPINE_PKG=$1
  shift
  if [ -x "/usr/bin/$install_linux_prog_NAME" ]; then
    export DK_PROG_INSTALLED_LOCATION="/usr/bin/$install_linux_prog_NAME"
  elif [ -x "/bin/$install_linux_prog_NAME" ]; then
    export DK_PROG_INSTALLED_LOCATION="/bin/$install_linux_prog_NAME"
  else
    if [ -x /sbin/apk ]; then
      if [ "$(id -u)" -eq 0 ]; then
        run_maybe_quiet /sbin/apk add --quiet --no-progress "$install_linux_prog_ALPINE_PKG"
      else
        echo "Running: sudo /sbin/apk add --quiet --no-progress  $install_linux_prog_ALPINE_PKG" >&2
        sudo /sbin/apk add --quiet --no-progress "$install_linux_prog_ALPINE_PKG"
      fi
    elif command -v yum > /dev/null 2> /dev/null; then
      if [ "$(id -u)" -eq 0 ]; then
        run_maybe_quiet yum install -q -y "$install_linux_prog_PKG"
      else
        echo "Running: sudo yum install -q -y $install_linux_prog_PKG" >&2
        sudo yum install -q -y "$install_linux_prog_PKG"
      fi
    else
      if [ "$(id -u)" -eq 0 ]; then
        run_maybe_quiet apt-get -qq install -y --no-install-suggests "$install_linux_prog_PKG"
      else
        echo "Running: sudo apt-get -qq install -y --no-install-suggests $install_linux_prog_PKG" >&2
        sudo apt-get -qq install -y --no-install-suggests "$install_linux_prog_PKG"
      fi
    fi
    DK_PROG_INSTALLED_LOCATION=$(command -v "$install_linux_prog_NAME")
    export DK_PROG_INSTALLED_LOCATION
  fi
}

get_homebrew_binary() {
  get_homebrew_binary_NAME=$1
  shift
  if command -v brew > /dev/null 2> /dev/null; then
    get_homebrew_binary_PREFIX=$(brew --prefix)
    if [ -x "$get_homebrew_binary_PREFIX/bin/$get_homebrew_binary_NAME" ]; then
      export DK_PROG_INSTALLED_LOCATION="$get_homebrew_binary_PREFIX/bin/$get_homebrew_binary_NAME"
      return 0
    fi
  fi
  return 1
}

install_macos_prog() {
  install_macos_prog_NAME=$1
  shift
  install_macos_prog_PKG=$1
  shift
  if [ -x "/usr/bin/$install_macos_prog_NAME" ]; then
    export DK_PROG_INSTALLED_LOCATION="/usr/bin/$install_macos_prog_NAME"
  elif [ -x "/bin/$install_macos_prog_NAME" ]; then
    export DK_PROG_INSTALLED_LOCATION="/bin/$install_macos_prog_NAME"
  elif [ -x "/usr/local/bin/$install_macos_prog_NAME" ]; then
    export DK_PROG_INSTALLED_LOCATION="/usr/local/bin/$install_macos_prog_NAME"
  elif get_homebrew_binary "$install_macos_prog_NAME"; then
    # DK_PROG_INSTALLED_LOCATION already set by [get_homebrew_binary]
    true
  else
    if command -v brew > /dev/null 2> /dev/null; then
      run_maybe_quiet brew install --quiet --formula "$install_macos_prog_PKG"
      get_homebrew_binary "$install_macos_prog_NAME"
      # DK_PROG_INSTALLED_LOCATION already set by [get_homebrew_binary]
    elif command -v port > /dev/null 2> /dev/null; then
      if [ "$(id -u)" -eq 0 ]; then
        run_maybe_quiet port install "$install_macos_prog_PKG"
      else
        echo "Running: sudo port install $install_macos_prog_PKG" >&2
        sudo port install "$install_macos_prog_PKG"
      fi
      DK_PROG_INSTALLED_LOCATION=$(command -v "$install_macos_prog_NAME")
      export DK_PROG_INSTALLED_LOCATION
    else
      echo "FATAL: Neither Homebrew nor MacPorts are available on your macOS. You can follow https://docs.brew.sh/Installation to install Homebrew." >&2
      exit 2
    fi
  fi
}

case "$BUILDHOST_ARCH" in
  linux_*)
    #   Need either [wget] or [curl] for [downloadfile]
    if [ ! -x /usr/bin/wget ] && [ ! -x /bin/wget ] && [ ! -x /usr/bin/curl ] && [ ! -x /bin/curl ]; then
      install_linux_prog wget wget wget || install_linux_prog curl curl curl
    fi
    #   For handling tar balls later in this script
    install_linux_prog tar tar tar
    ;;
esac

# NINJA
# -----
#   We need a valid CMAKE_GENERATOR to do FetchContent_Populate() in script mode

NINJA_EXE=

ninja_destdir=$tools_dir/ninja-$ninja_majminpat_ver
install -d "$tools_dir/dl"
download_ninja() {
  case "$BUILDHOST_ARCH" in
    darwin_*)
      printf_maybe_quiet "%s\n\n" "-- Downloading ninja-v$ninja_majminpat_ver for macOS"
      downloadfile \
        "https://github.com/ninja-build/ninja/releases/download/v$ninja_majminpat_ver/ninja-mac.zip" \
        "$tools_dir/dl/ninja.zip" \
        $ninja_cksum256_darwin_universal ;;
    linux_x86_64)
      printf_maybe_quiet "%s\n\n" "-- Downloading ninja-v$ninja_majminpat_ver for Linux x86_64"
      downloadfile \
        "https://github.com/diskuv/dkcoder/releases/download/ninja-$ninja_majminpat_ver/ninja-linux_x86_64" \
        "$tools_dir/dl/ninja" \
        $ninja_cksum256_linux_x86_64 ;;
    linux_x86)
      printf_maybe_quiet "%s\n\n" "-- Downloading ninja-v$ninja_majminpat_ver for Linux x86"
      downloadfile \
        "https://github.com/diskuv/dkcoder/releases/download/ninja-$ninja_majminpat_ver/ninja-linux_x86" \
        "$tools_dir/dl/ninja" \
        $ninja_cksum256_linux_x86 ;;
    linux_arm64)
      printf_maybe_quiet "%s\n\n" "-- Downloading ninja-v$ninja_majminpat_ver for Linux arm64"
      downloadfile \
        "https://github.com/diskuv/dkcoder/releases/download/ninja-$ninja_majminpat_ver/ninja-linux_arm64" \
        "$tools_dir/dl/ninja" \
        $ninja_cksum256_linux_arm64 ;;
  esac
}
export_ninja_vars() {
  if [ -z "${NINJA_EXE:-}" ]; then
    case "$BUILDHOST_ARCH" in
      darwin_*)
        NINJA_EXE="$ninja_destdir/bin/ninja" ;;
      linux_*)
        NINJA_EXE="$ninja_destdir/bin/ninja" ;;
    esac
  fi
}
have_correct_ninja=0
if [ -x "$tools_dir/ninja-$ninja_majminpat_ver/bin/ninja" ]; then
  # shellcheck disable=SC2016
  have_correct_ninja_VER=$("$tools_dir/ninja-$ninja_majminpat_ver/bin/ninja" --version)
  if [ "$have_correct_ninja_VER" = "$ninja_majminpat_ver" ]; then
    have_correct_ninja=1
  fi
fi
if [ $have_correct_ninja -eq 0 ]; then
  download_ninja
fi
#   Handle executable or zip
if [ -e "$tools_dir/dl/ninja" ]; then
  install -d "$ninja_destdir/bin"
  install "$tools_dir/dl/ninja" "$ninja_destdir/bin/"
elif [ -e "$tools_dir/dl/ninja.zip" ]; then
  # Only macOS at this point. And macOS distributes 'unzip'.
  rm -rf "$tools_dir/ninja-$ninja_majminpat_ver"
  cd "$tools_dir/dl"
  rm -f ninja
  unzip -q ninja.zip
  rm -f ninja.zip
  cd - > /dev/null
  install -d "$ninja_destdir/bin"
  mv "$tools_dir/dl/ninja" "$ninja_destdir/bin/"
fi

# Set NINJA_EXE
export_ninja_vars
if [ -z "${NINJA_EXE:-}" ]; then
  echo "This platform is not supported. No ninja download logic has been added" >&2
  exit 1
fi

# Validate
"$NINJA_EXE" --version > /dev/null

# CMAKE
# -----

cmake_base=
cmake_bindir=
cmake_destdir=$tools_dir/cmake-$cmake_majminpat_ver
install -d "$tools_dir/dl"
download_cmake() {
  case "$BUILDHOST_ARCH" in
    linux_x86_64) cmake_cksum256_linux=$cmake_cksum256_linux_x86_64 ;;
    linux_x86) cmake_cksum256_linux=$cmake_cksum256_linux_x86 ;;
    linux_arm64) cmake_cksum256_linux=$cmake_cksum256_linux_arm64
  esac
  case "$BUILDHOST_ARCH" in
    darwin_*)
      cmake_base="cmake-$cmake_majminpat_ver-macos10.10-universal"
      printf_maybe_quiet "%s\n\n" "-- Downloading cmake-$cmake_majminpat_ver for macOS"
      downloadfile \
        "https://github.com/Kitware/CMake/releases/download/v$cmake_majminpat_ver/$cmake_base.tar.gz" \
        "$tools_dir/dl/cmake.tar.gz" \
        $cmake_cksum256_darwin_universal
      cmake_bindir="$cmake_destdir/bin"
      ;;
    linux_x86_64|linux_x86|linux_arm64)
      cmake_base=.
      printf_maybe_quiet "%s\n\n" "-- Downloading cmake-$cmake_majminpat_ver for $BUILDHOST_ARCH"
      downloadfile \
        "https://github.com/diskuv/dkcoder/releases/download/cmake-$cmake_majminpat_ver/cmake-$BUILDHOST_ARCH.tar.gz" \
        "$tools_dir/dl/cmake.tar.gz" \
        "$cmake_cksum256_linux"
      cmake_bindir="$cmake_destdir/bin"
      ;;
  esac
}
export_cmake_vars() {
  case "$BUILDHOST_ARCH" in
    darwin_*)
      cmake_bindir="$cmake_destdir/bin" ;;
    linux_x86_64|linux_x86|linux_arm64)
      cmake_bindir="$cmake_destdir/bin" ;;
  esac
}
have_correct_cmake=0
if [ -x "$tools_dir/cmake-$cmake_majminpat_ver/bin/cmake" ]; then
  # shellcheck disable=SC2016
  have_correct_cmake_VER=$("$tools_dir/cmake-$cmake_majminpat_ver/bin/cmake" --version | $DKMLSYS_AWK 'NR==1{print $NF}')
  if [ "$have_correct_cmake_VER" = "$cmake_majminpat_ver" ]; then
    have_correct_cmake=1
  fi
fi
if [ $have_correct_cmake -eq 0 ]; then
  download_cmake
fi
#   Handle tarball
if [ -e "$tools_dir/dl/cmake.tar.gz" ] && [ -n "$cmake_base" ]; then
  rm -rf "$tools_dir/cmake-$cmake_majminpat_ver"
  install -d "$cmake_destdir"
  #   nit: BusyBox has a strict command line argument parsing ...
  #   tar c|x|t [-ZzJjahmvokO] [-f TARFILE] [-C DIR] [-T FILE] [-X FILE] [LONGOPT]... [FILE]...
  tar x -z -f "$tools_dir/dl/cmake.tar.gz" -C "$cmake_destdir"
  rm -f "$tools_dir/dl/cmake.tar.gz"
  set +f
  if [ ! "." = "$cmake_base" ]; then
    if [ -e "$cmake_destdir/$cmake_base/CMake.app" ]; then
        mv "$cmake_destdir/$cmake_base/CMake.app/Contents"/* "$cmake_destdir/"
    else
        mv "$cmake_destdir/$cmake_base"/* "$cmake_destdir/"
    fi
  fi
  set -f
fi

# Put cmake in PATH
export_cmake_vars
if [ ! "$cmake_bindir" = "/usr/bin" ]; then
  true
elif [ -n "$cmake_bindir" ] && [ -d "$cmake_bindir" ]; then
  tools_bin_dir=$(cd "$cmake_bindir" && pwd)
  export PATH="$tools_bin_dir:$PATH"
  unset tools_bin_dir
else
  echo "This platform is not supported. No cmake 3.25+ download logic has been added" >&2
  exit 1
fi

# Validate
"$cmake_bindir/cmake" --version > /dev/null

# --- Create an 8-byte nonce ---

# Always prefer (in order):
#   /usr/bin/openssl rand
#   /usr/bin/dd status=none if=/dev/urandom count=8 bs=1 | /usr/bin/od -An -t x8 | /usr/bin/tr -cd 0-9A-Fa-f

if [ -x /usr/bin/openssl ]; then
  dk_nonce=$(/usr/bin/openssl rand -hex 8)
elif [ -b /dev/urandom ] && [ -x /usr/bin/dd ] && [ -x /usr/bin/od ] && [ -x /usr/bin/tr ]; then
  dk_nonce=$(/usr/bin/dd status=none if=/dev/urandom count=8 bs=1 | /usr/bin/od -An -t x8 | /usr/bin/tr -cd 0-9A-Fa-f)
else
  # Default to the PID which should not be predictable on safe operating systems
  dk_nonce=$$
fi

# --- Console ---

if [ -t 0 ]; then
  dk_tty=1
else
  dk_tty=0
fi

# --- Run finder script ---

dk_work=$tools_dir/work

cd "$PROJ_DIR"
"$cmake_bindir/cmake" \
  -D CMAKE_GENERATOR=Ninja -D CMAKE_MAKE_PROGRAM="$NINJA_EXE" \
  -D "DKCODER_PWD:FILEPATH=$dk_pwd" \
  -D "DKCODER_DATA_HOME:FILEPATH=$tools_dir" \
  -D "DKCODER_WORKDIR:FILEPATH=$dk_work" \
  -D "DKCODER_NONCE:STRING=$dk_nonce" \
  -D "DKCODER_TTY:STRING=$dk_tty" \
  -D "DKCODER_CMDLINE:STRING=$*" \
  -P __dk.cmake

# --------------- Execute post-command outside of CMake --------------
# Sometimes a command wants to own the terminal or the command line arguments.
# CMake, for example, intercepts the Ctrl-C signal in buggy ways:
# https://stackoverflow.com/questions/75071180/pass-ctrlc-to-cmake-custom-command-under-vscode

cleanup() {
  PATH=/usr/bin:/bin rm -f "$dk_work/$dk_nonce.sh"
}

if [ -e "$dk_work/$dk_nonce.sh" ]; then
  trap cleanup EXIT
  /bin/sh "$dk_work/$dk_nonce.sh" "$@"
  cleanup
fi