Replies: 8 comments
-
This is not related to the level of restlessness. I adjusted it to 9, but he still keeps receiving it |
Beta Was this translation helpful? Give feedback.
-
From what you described I can't tell anything. I have no idea. |
Beta Was this translation helpful? Give feedback.
-
0a459e297e4a9bfb19cf070ea785cb6c.mp4I am certain that there is no signal at 400MHz. I opened SQL=9, but it is still RX. When I long press 1 or press up and down to switch frequencies, the problem disappears. However, after resetting, the problem reappears |
Beta Was this translation helpful? Give feedback.
-
I didn't press the listening button throughout the entire process, he would listen on his own |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
The BK chip detects some signal, that is all I can tell. It doesn't happen on my radio. |
Beta Was this translation helpful? Give feedback.
-
Yes, it's strange. My only change was to replace BL24C64 |
Beta Was this translation helpful? Give feedback.
-
I replaced my K5 with a new BL24c64, which can read and write normally, but I found that it keeps turning on the green light to receive. If I flash it into the official firmware or use 1o11, it won't work like this. I'm curious why this is
Beta Was this translation helpful? Give feedback.
All reactions