Unable to add to 'Skip'

[merc07]

Are we able to add to 'Skip' channels when scanning?

[f4axk]

To “Skip” when scanning
scanlist none

[merc07]

You can set the radio to scan List 1, List 2 or * which scans all channels
Even if set to none, the radio will scan that channel in the * scan mode
I would have thought the 'skip' column was there for that purpose ?

[f4axk]

if you have a uv5r skip radio it is possible to activate skip.
if radio uvk5 none replaces skip.

possibility to exclude a channel with key 5 noaa

5 NOAA
in channel mode - toggles scan lists that the selected channel is assigned to. You will see I and II symbols changing on the right side of the channel label

https://github.com/egzumer/uv-k5-firmware-custom/wiki/Button-functions

[egzumer]

"Skip" is a generic CHIRP function, which is not supported by the driver. At the first glance if used would be limiting to the scan settings that quansheng offers (there are 2 scan lists, not one). Use Scanlists option as suggested.