Skip to content

Latest commit

 

History

History
150 lines (109 loc) · 8.75 KB

README.md

File metadata and controls

150 lines (109 loc) · 8.75 KB

Ansible Best Practises

If infrastructures are to be treated as a code than projects that manage them must be treated as software projects. As your infrastructure code gets bigger and bigger you have more problems to deal with. Code layout, variable precedence, small hacks here and there. Therefore, the organization of your code is very important, and in this repository you can find some of the best practices (in our opinion) to manage your infrastructure code. Problems that are addressed are:

  • Overall organization
  • How to manage external roles
  • Usage of variables
  • Naming
  • Staging
  • Complexity of plays
  • Encryption of data (e.g. passwords, certificates)
  • Installation of ansible and module dependencies

TL;DR

  • Do not manage external roles in your repository manually, use ansible-galaxy
  • Do not use pre_task, task or post_tasks in your play, use roles to reuse the code
  • Keep all your variables in one place, if possible
  • Do not use variables in your play
  • Use variables in the roles instead of hard-coding
  • Keep the names consistent between groups, plays, variables, and roles
  • Different environments (development, test, production) must be close as possible, if not equal
  • Do not put your password or certificates as plain text in your git repo, use ansible-vault for encrypting
  • Use tags in your play
  • Keep all your ansible dependencies in a single place and make the installation dead-simple

1. Directory Layout

This is the directory layout of this repository with an explanation.

production.ini            # inventory file for production stage
development.ini           # inventory file for development stage
test.ini                  # inventory file for test stage
vpass                     # ansible-vault password file
                          # This file should not be committed into the repository
                          # therefore file is in ignored by git
group_vars/
    all/                  # variables under this directory belongs all the groups
        apt.yml           # ansible-apt role variable file for all groups
    webservers/           # here we assign variables to webservers groups
        apt.yml           # Each file will correspond to a role i.e. apt.yml
        nginx.yml         # ""
    postgresql/           # here we assign variables to postgresql groups
        postgresql.yml    # Each file will correspond to a role i.e. postgresql
        postgresql-password.yml   # Encrypted password file
plays/
    ansible.cfg           # Ansible.cfg file that holds all ansible config
    webservers.yml        # playbook for webserver tier
    postgresql.yml        # playbook for postgresql tier

roles/
    roles_requirements.yml# All the information about the roles
    external/             # All the roles that are in git or ansible galaxy
                          # Roles that are in roles_requirements.yml file will be downloaded into this directory
    internal/             # All the roles that are not public

extension/
    setup/                 # All the setup files for updating roles and ansible dependencies

2. How to Manage Roles

It is a bad habit to manage the roles that are developed by other developers, in your git repository manually. It is also important to separate them so that you can distinguish those that are external and can be updated vs those that are internal. Therefore, you can use ansible-galaxy for installing the roles you need, at the location you need, by simply defining them in the roles_requirements.yml:

---
- src: ANXS.build-essential
  version: "v1.0.1"

Roles can be downloaded/updated with this command:

./extensions/setup/role_update.sh

This command will delete all external roles and download everything from scratch. It is a good practice, as this will not allow you to make changes in the roles.

3. Keep your plays simple

If you want to take the advantage of the roles, you have to keep your plays simple. Therefore do not add any tasks to your main play. Your play should only consist of the list of roles that it depends on. Here is an example:

---

- name: postgresql.yml | All roles
  hosts: postgresql
  sudo: True

  roles:
    - { role: common,                   tags: ["common"] }
    - { role: ANXS.postgresql,          tags: ["postgresql"] }

As you can see there are also no variables in this play, you can use variables in many different ways in ansible, and to keep it simple and easier to maintain do not use variables in plays. Furthermore, use tags, they give wonderful control over role execution.

4. Stages

Most likely you will need different stages (e.g. test, development, production) for the product you are either developing or helping to develop. A good way to manage different stages is to have multiple inventory files. As you can see in this repository, there are three inventory files. Each stage you have must be identical as possible, that also means, you should try to use few as possible host variables. It is best to not use at all.

5. Variables

Variables are wonderful, they allow you to use all this existing code by just setting some values. Ansible offers many different ways to use variables. However, soon as your project starts to get bigger, and more you spread variables here and there, more problems you will encounter. Therefore it is good practice to keep all your variables in one place, and this place happen to be group_vars. They are not host dependent, so it will help you to have a better staging environment as well. Furthermore, if you have internal roles that you have developed, keep the variables out of them as well, so you can reuse them easily.

6. Name consistency

If you want to maintain your code, keep the name consistent between your plays, inventories, roles and group variables. Use the name of the roles to separate different variables in each group. For instance, if you are using the role nginx under webservers play, variables that belong to nginx should be located under group_vars/webservers/nginx.yml. What this effectively means is that group_vars supports directory and every file inside the group will be loaded. You can, of course, put all of them in a single file as well, but this is messy, therefore don't do it.

7. Encrypting Passwords and Certificates

It is most likely that you will have a password or certificates in your repository. It is not a good practice to put them in a repository as plain text. You can use ansible-vault to encrypt sensitive data. You can refer to postgresql-password.yml in group variables to see the encrypted file and postgresql-password-plain.yml to see the plain text file, commented out. To decrypt the file, you need the vault password, which you can place in your root directory but it MUST NOT be committed to your git repository. You should share the password with your coworkers with some other method than committing to git a repo.

There is also git-crypt that allow you to work with a key or GPG. It's more transparent on daily work than ansible-vault

8. Project Setup

As it should be very easy to set-up the work environment, all required packages that ansible needs, as well as ansible should be installed very easily. This will allow newcomers or developers to start using ansible project very fast and easily. Therefore, python_requirements.txt file is located at:

extensions/setup/python_requirements.txt

This structure will help you to keep your dependencies in a single place, as well as making it easier to install everything including ansible. All you have to do is to execute the setup file:

./extensions/setup/setup.sh

Running the Code

Code in this repo is functional and tested. To run it, you need to install ansible and all the dependencies. You can do this simply by executing:

./extensions/setup/setup.sh
  • If you already have ansible, and you do not want to go through the installation simply create a vpass text file in the root directory and add the secret code (123456)
  • To install roles execute the role_update.sh which will download all the roles
./extensions/setup/role_update.sh
  • Go to the plays directory and then execute the following command ( do not forget to change the host address in the development.ini )
ansible-playbook -i ../development.ini webservers.yml

License

MIT License.