Access point example with password can't connect (ESP32S3)

[jvatic]

When I run the access_point example, changing the config to the following, I can't connect to the AP (whereas I can before the config change).

let client_config = Configuration::AccessPoint(AccessPointConfiguration {
    ssid: "esp-wifi".try_into().unwrap(),
    password: "some test password".try_into().unwrap(),
    auth_method: esp_wifi::wifi::AuthMethod::WPA2Personal,
    ..Default::default()
});

It appears the AP isn't accepting the password as the connecting system keeps prompting for it.

Are there any logs that would be helpful in debugging this? When I enable the log feature for esp-wifi there's a lot of noise.

[bjoernQ]

Currently non-open APs are not supported: see https://github.com/esp-rs/esp-hal/blob/main/esp-wifi/README.md#missing--to-be-done

[bjoernQ]

Please re-open in the esp-hal repository (esp-wifi moved there) if needed