PX4 install error on windows (IDFGH-14229)

[Lee-beep086]

Answers checklist.

• I have read the documentation ESP-IDF Programming Guide and the issue is not addressed there.
• I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
• I have searched the issue tracker for a similar issue and not found a similar issue.

IDF version.

v1.11.2

Operating System used.

Windows

How did you build your project?

Command line with Make

If you are using Windows, please specify command line type.

None

What is the expected behavior?

success

What is the actual behavior?

Steps to reproduce.

1. I changed the downloaded firmware version from 1.9.1 to 1.15.1, and there were issues with different versions, but the problems that occurred were slightly different
2. When the firmware version is 1.12.1, the problem that occurs is shown in the following figure
   

...

Build or installation Logs.

please help me

More Information.

No response

[igrr]

@Lee-beep086 You probably need to report this issue in the correct repository: https://github.com/PX4/PX4-Autopilot/issues.