SMA Sunny Boy 3.7 | battery 1 power: read failed: dial tcp #14462
Unanswered
pixbalance
asked this question in
Erste Hilfe
Replies: 2 comments
-
It seems that reconnecting the networks helps, but not as final solution |
Beta Was this translation helpful? Give feedback.
0 replies
-
I still have the same issue and cannot reproduce the issue. After a while, sometimes a day, sometimes a week, I get the battery error message. |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Seit zwei Tagen habe das Problem, dass evcc den SMA SunnyBoy nicht mehr auslesen kann und im Log die Meldung "battery 1 power: read failed: dial tcp" erscheint.
[site ] INFO 2024/06/18 16:35:33 site config:
[site ] INFO 2024/06/18 16:35:33 meters: grid ✓ pv ✓ battery ✓
[site ] INFO 2024/06/18 16:35:33 grid: power ✓ energy ✓ currents ✓
[site ] INFO 2024/06/18 16:35:33 pv 1: power ✓ energy ✓ currents ✓
[site ] INFO 2024/06/18 16:35:33 battery 1: power ✓ energy ✓ currents ✗ soc ✓ capacity ✗
[site ] INFO 2024/06/18 16:35:33 vehicles:
[site ] INFO 2024/06/18 16:35:33 vehicle 1: range ✓ finish ✓ status ✓ climate ✗ wakeup ✓
[lp-1 ] INFO 2024/06/18 16:35:33 loadpoint 1:
[lp-1 ] INFO 2024/06/18 16:35:33 mode: pv
[lp-1 ] INFO 2024/06/18 16:35:33 charger: power ✗ energy ✗ currents ✗ phases ✗ wakeup ✗
[lp-1 ] INFO 2024/06/18 16:35:33 meters: charge ✗
[site ] DEBUG 2024/06/18 16:35:33 set buffer soc: 100
[site ] DEBUG 2024/06/18 16:35:33 set priority soc: 90
[lp-1 ] DEBUG 2024/06/18 16:35:33 !! active phases: 3p = min(0p measured 0p vehicle 3p physical 0p charger)
[lp-1 ] DEBUG 2024/06/18 16:35:33 phase timer inactive
[lp-1 ] DEBUG 2024/06/18 16:35:33 pv timer inactive
[lp-1 ] DEBUG 2024/06/18 16:35:33 max charge current: 6A
[lp-1 ] DEBUG 2024/06/18 16:35:33 !! active phases: 3p = min(0p measured 0p vehicle 3p physical 0p charger)
[site ] DEBUG 2024/06/18 16:35:33 ----
[lp-1 ] DEBUG 2024/06/18 16:35:33 charge power: 0W
[site ] DEBUG 2024/06/18 16:35:33 pv power: 5364W
[site ] ERROR 2024/06/18 16:35:43 battery 1 power: read failed: dial tcp 192.19.0.153:502: i/o timeout
die Config ist folgende:
type: template
template: sma-sbs-modbus
usage: battery
modbus: tcpip
id: 3
host: 192.19.0.153 # Hostname
port: 502 # Port
Gab es ein Update oder liegt es an einer neuen Evcc Version?
Beta Was this translation helpful? Give feedback.
All reactions