Smartmeter support für Elgris Modbus TCP #16020
Replies: 12 comments 20 replies
-
Hier noch meine verwendete Hardware:
|
Beta Was this translation helpful? Give feedback.
-
Hallo Volker,
Grüße, |
Beta Was this translation helpful? Give feedback.
-
Hallo Volker, Ich werde also meinen Elektriker bitten, die Batterie anders anzuschließen. Momentan habe ich nur noch das Problem, dass ich die zweite Alfen Wallbox nicht in evcc einbinden kann. Ich weiß nicht warum? So lange dies nicht funktioniert, würden die Autos zuerst meine sonnen- Batterie leer ziehen - daher muss ich irgendwie auch die zweite Wallbox ins System bekommen. Vielleicht siehst Du den Fehler: chargers:
loadpoints:
Vielen Dank. |
Beta Was this translation helpful? Give feedback.
-
Lizensen sind vorhanden und ich habe ein SCN entsprechend eingerichtet: Sobald ich die zweite Wallbox in der Konfiguration hinzufüge bekomme ich folgende Fehlermeldung: user@raspberrypi:~ $ evcc charger Hier mein Eintrag in der evcc:
loadpoints:
|
Beta Was this translation helpful? Give feedback.
-
Ich bekomme die gleiche Fehlermeldung, wenn ich nur die zweite Wallbox einbinde und die erste weglasse... Ist also ein generelles Problem mit der zweiten Wallbox aber ich weiß nicht warum. |
Beta Was this translation helpful? Give feedback.
-
Wenn ich die Fehlermeldung richtig lese, dann lässt die Wallbox die Verbindung nicht zu. |
Beta Was this translation helpful? Give feedback.
-
Hallo Chris, Ich habe im Smart Charging Network die Wallbox "my_charger2" als "Master" festgelegt. In der Alfen Software "MyEve" setzt man dafür den Haken bei "Aktive Load Balancing". In der Slave Wallbox darf der Haken bei "Aktive Load Balancing" nicht gesetzt werden. Wenn ich die Master und die Slave Wallbox vertausche kann ich wieder nur auf die "Master" Wallbox zugreifen. Um das Problem zu lösen habe ich folgendes Probiert. Vielen Dank! Jetzt muss nur noch mein Elektriker die Batterie so anschließen, dass PV- Überschussladen funktioniert !! Ich werde weiter berichten, aber es wird wahrscheinlich ein paar Wochen dauern, bis er das umklemmen kann. |
Beta Was this translation helpful? Give feedback.
-
Hallo Volker, hallo Chris, Weiterhin hat mein Elektriker nun über den Installateur- Zugang Modbus TCP am SDongke5 aktiviert. Ich habe das Template für den SDongleA-05 in der evcc.yaml usage:PV ergänzt und unter "site" hinzugefügt aber ich sehe keinen Unterschied? Ich weiß nicht, wofür ich den Huawei Wechselrichter ergänzen muss wenn doch schon alle Informationen angezeigt werden? Danke und viele Grüße, |
Beta Was this translation helpful? Give feedback.
-
Hallo Volker, Hier meine EVCC.YAML: /etc/evcc.yamlopen evcc at http://evcc.local:7070network: log: error unique installation idplant: xxx meters: Elgris Smartmeter mit Modbus TCP Schnittstelle EM24
template: solarlog
Modbus TCP
SonnenBatterie 10
SDongleA-05 für Huawei Wechselrichter
Modbus TCP
chargers:
vehicles:
loadpoints:
interval: 30s # control cycle interval sponsortoken: xy.xy.xy telemetry: false site: |
Beta Was this translation helpful? Give feedback.
-
Bin gerade in der Konfiguration der SonnenBatterie und weiß nicht welche IP für welches Endgerät ich eingeben muss? |
Beta Was this translation helpful? Give feedback.
-
Hatte das falsche API aktiviert. Habe nun das JSON API aktiviert und den Token in die EVCC.YMAL eingefügt und teste es gleich... |
Beta Was this translation helpful? Give feedback.
-
Hallo Volker, tut mir wirklich leid, dass ich mich so blöd anstelle, aber ich weiß nicht was Du meinst? Auch Google hat mir nicht wirklich geholfen zu verstehen, was genau ich an der Formatierung ändern muss muss? bitte formatiere das mal lesbar Ich habe noch Probleme mit der Darstellung der Ströme und dem Entladen der Batterie. Soblad ich "schnell" laden aktiviere wird die Hausbatterie entladen, obwohl ich Batterieunterstütztes Laden auf 100% eingestellt habe und ich habe auch den Haken gesetzt für "Verhindere Entladung im Schnell-Modus und bei geplantem Laden". Wenn ich beim PV- Überschussladen einstelle, dass die Hausbatterie bis zu 20% Priorität beim Laden hat, dann funktioniert das. Erst oberhalb von 20% startet PV- Überschussladen. Aber auch hier wird zumindest zum Teil die Hausbatterie entladen. Noch etwas. Ich hatte den Huawei Dongle zusätzlich zu dem Smartmeter unter "usage:pv" hinzugenommen, nachdem ich Modbus TCP aktivieren konnte. Da hier allerdings alle Ströme doppelt angezeigt wurden (Smartmeter + Dongle haben sich addiert), habe ich den Dongle wieder rausgenommen. Dachte immer es wäre das beste, wenn alle Messgeräte in EVCC eingebunden werden damit die Darstellung richtig ist. Vielen Dank. Grüße, |
Beta Was this translation helpful? Give feedback.
-
Konfiguration (/home/user/evcc.yaml)
Hier die Log- Datei:
Sep 10 17:53:04 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:04 charge power: 1375W
Sep 10 17:53:04 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:04 charge currents: [6.02 0 0]A
Sep 10 17:53:04 raspberrypi evcc[5785]: [site ] DEBUG 2024/09/10 17:53:04 grid meter: 202W
Sep 10 17:53:04 raspberrypi evcc[5785]: [site ] DEBUG 2024/09/10 17:53:04 grid powers: [-94 82 213]W
Sep 10 17:53:04 raspberrypi evcc[5785]: [site ] DEBUG 2024/09/10 17:53:04 grid currents: [-0.914 0.915 1.38]A
Sep 10 17:53:04 raspberrypi evcc[5785]: [site ] DEBUG 2024/09/10 17:53:04 pv power: 1173W
Sep 10 17:53:04 raspberrypi evcc[5785]: [site ] DEBUG 2024/09/10 17:53:04 site power: 202W
Sep 10 17:53:04 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:04 detected active phases: 1p
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 !! session: chargeRater.chargedEnergy=2.4 - chargedAtStartup=0.0
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 charge total import: 425.718kWh
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 charger status: C
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 soc estimated: 53.76% (vehicle: 50.00%)
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 vehicle soc: 54%
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 vehicle soc limit: 100%
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 vehicle range: 176km
Sep 10 17:53:05 raspberrypi evcc[5785]: [lp-1 ] DEBUG 2024/09/10 17:53:05 pv charge current: min 6A > 5.12A (202W @ 1p, battery: false)
Darstellung EVCC:
Werte der PV- Anlage und Batterieeinspeisung aus der Sonnen App decken sich nicht mit den Strömen:
Ich habe nach bestem Wissen und Gewissen seit einer Woche täglich an dem EVCC gearbeitet. Ich bin anfänger und hatte bisher keine Erfahrung mit Linux und dem RaspberryPi. Wahrscheinlich habe ich grundlegende Fehler eingebaut aber ich weiß es leider nicht besser. Deshalb möchte ich mich gleich zu Beginn dafür entschuldigen und Euch um Geduld mit mir bitten. Vielen Dank dafür ;-)
Viele Grüße,
Dirk
Beta Was this translation helpful? Give feedback.
All reactions