Work Items describe and keep track of work that needs to be done. A user can be assigned to a Work Item. Each Work Item must be attached to a Collaboration Space and an Area (assigned by default). This can be used to model bugs, tasks, features, ideas, and more.
The following guide is mainly targeted towards a Linux or Mac OSX development machine. If you are on Windows, we recommend to take a look at Getting started with fabric8-wit development on Windows.
You need to install:
-
go(>= v1.8) -
git -
mercurial -
make
Run the following command to find out your Go version.
$ go version
You must at least have Go version 1.8.
See Fetch dependencies to see an explanaition on how we deal with dependencies.
This project uses dep as a package manager for Go.
Running the make deps command will install dep in $GOPATH/bin if it’s not already available on your system.
Assuming you have Go installed and configured (have $GOPATH setup and
pointing to a single directory) here is how to build.
Check out the code
$ git clone https://github.com/fabric8-services/fabric8-wit $GOPATH/src/github.com/fabric8-services/fabric8-wit
Like most other projects, this one depends on various other projects that need to be downloaded.
We also generate some code from design files that shall make it into our final artifacts.
To fetch the dependencies, generate code and finally build the project you can
type make in a freshly clone repository of this project.
$ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make
There is no need to fetch the dependencies, or re-generate code every time you
want to compile. That’s why we offer special make targets for these topics:
This will download all the dependencies for this project inside a directory
called vendor. This way we can ensure that every developer and our CI system
is using the same version.
$ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make deps
You need to run this command if you just checked out the code and later if you’ve modified the designs.
$ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make generate
If you want to just build the ALM server and client, run make build.
$ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make build
This removes all downloaded dependencies, all generated code and compiled artifacts.
$ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make clean
Here’s how to run all available tests. All tests will check all Go packages
except those in the vendor/ directory.
Make sure you have docker and docker-compose available.
Setting up test environment - make integration-test-env-prepare
Tear test environment down - make integration-test-env-tear-down
| unit-tests |
Unit tests have the minimum requirement on time and environment setup. $ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make test-unit |
| integration-tests |
Integration tests demand more setup (i.e. the PostgreSQL DB must be already
running) and probably time. We recommend that you use $ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make test-integration |
| all |
To run both, the unit and the integration tests you can run $ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make test-all |
To visualize the coverage of unit, integration, or all tests you can run these commands:
-
$ make coverage-unit -
$ make coverage-integration -
$ make coverage-all
|
Note
|
If the tests (see Tests) have not yet run, or if the sources have changed since the last time the tests ran, they will be re-run to produce up to date coverage profiles. |
Each of the above tests (see Tests) produces a coverage profile by default. Those coverage files are available under
tmp/coverage/<package>/coverage.<test>.mode-<mode>
Here’s how the <placeholders> expand
<package>
|
something like |
<test>
|
|
<mode>
|
Sets the mode for coverage analysis for the packages being tested.
Possible values for
|
In addition to all individual coverage information for each package, we also create three more files:
tmp/coverage.unit.mode-<mode>
|
This file collects all the coverage profiles for all unit tests. |
tmp/coverage.integration.mode-<mode>
|
This file collects all the coverage profiles for all integration tests. |
tmp/coverage.mode-<mode>
|
This file is the merge result of the two afore mentioned files and thus gives coverage information for all tests. |
There is a separate documentation for building WIT using minishift
If no configuration file is specified when the core is started, these are the defaults.
#------------------------
# Postgres configuration
#------------------------
postgres.host: localhost
postgres.port: 5432
postgres.user: postgres
postgres.password: mysecretpassword
postgres.database: postgres
postgres.sslmode: disable
# The amount of time in seconds before the connection times out
postgres.connection.timeout: 5
# Duration to wait before trying to connect again
postgres.connection.retrysleep: 1s
#------------------------
# HTTP configuration
#------------------------
http.address: 0.0.0.0:8080
#------------------------
# Misc.
#------------------------
# Enable development related features, e.g. token generation endpoint
developer.mode.enabled: false
# Whether you want to create the common work item types such as bug, feature, ...
populate.commontypes: true
# -----------------------------
# Authentication configuration
# -----------------------------
token.privatekey : >
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
token.publickey : >
-----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAnwrjH5iTSErw9xUptp6Q
SFoUfpHUXZ+PaslYSUrpLjw1q27ODSFwmhV4+dAaTMO5chFv/kM36H3ZOyA146nw
xBobS723okFaIkshRrf6qgtD6coTHlVUSBTAcwKEjNn4C9jtEpyOl+eSgxhMzRH3
bwTIFlLlVMiZf7XVE7P3yuOCpqkk2rdYVSpQWQWKU+ZRywJkYcLwjEYjc70AoNpj
O5QnY+Exx98E30iEdPHZpsfNhsjh9Z7IX5TrMYgz7zBTw8+niO/uq3RBaHyIhDbv
enbR9Q59d88lbnEeHKgSMe2RQpFR3rxFRkc/64Rn/bMuL/ptNowPqh1P+9GjYzWm
PwIDAQAB
-----END PUBLIC KEY-----
# ----------------------------
# Github OAuth2 configuration
# ----------------------------
github.client.id : 875da0d2113ba0a6951d
github.secret : 2fe6736e90a9283036a37059d75ac0c82f4f5288Although this is a YAML file, we highly suggest to stick to this rather lenghty notation instead of nesting structs.
To override configuration values using environment variables, use the prefix
F8_ and replace the dots in the variables names with underscores.
For example to override postgres.password, set the environment variable F8_POSTGRES_PASSWORD to the value of you liking.
|
Note
|
config.yaml is not processed by default. In order to use it, the following environment variable must be set export F8_CONFIG_FILE_PATH="config.yaml"
|
|
Note
|
Environment variables override the default values and the ones you’ve set in your config file. |
Start up dependent docker services using docker-compose and runs auto reload on source change tool fresh.
$ cd $GOPATH/src/github.com/fabric8-services/fabric8-wit $ make dev
The above steps start the API Server on port 8080.
Test out the build by executing CLI commands in a different terminal.
|
Note
|
The CLI needs the API Server which was started on executing make dev to be up and running. Please do not kill the process. Alternatively if you haven’t run make dev you could just start the server by running ./bin/alm.
|
-
Generate a token for future use.
$ bin/wit-cli generate login -H localhost:8080 --pp
You should get access_token in response, set it as env to ease future call:
$ export KEY=<ACCESS_TOKEN>
-
Create a space
$ bin/wit-cli create space -H localhost:8080 --key $KEY --payload '{"data": {"name": "MY_SPACE","path": "","attributes": {"name": "MY_SPACE","description": "description"},"type": "spaces","privateSpace": false}}'
Note the spaceID to be used in next request.
-
Create a workitem for your newly created space
$ bin/wit-cli create workitems -H localhost:8080 --key $KEY --spaceID 564a1296-887e-47fe-9e56-40a39995f585 --payload '{"data":{"attributes":{"system.title":"test","system.description":"","system.state":"New"},"relationships":{"baseType":{"data":{"id":"2c169431-a55d-49eb-af74-cc19e895356f","type":"workitemtypes"}}},"type":"workitems"}}
where baseType in the payload refer to a work item type.
-
List all workitems for a given space:
$ bin/wit-cli list workitems -H localhost:8080 --pp --spaceID 564a1296-887e-47fe-9e56-40a39995f585
The database are kept in a docker container that gets reused between restarts. Thus restarts will not clear out the database.
To clear out the database kill the database like this:
$ docker kill fabric8wit_db_1 && docker rm fabric8wit_db_1
In case you have mulitple fabric8* running use docker ps to locate the container name.
System defined Work Item Types are
-
userstory
-
valueproposition
-
fundamental
-
experience
-
feature
-
bug
Use any one of above to create Work Item based on that type.
Following example creates a Work Item of type userstory
$ ./bin/wit-cli create workitem --key "<GENERATED TOKEN>" --payload '{ "data": { "attributes": { "system.owner": "tmaeder", "system.state": "open", "system.title": "Example of an Epic", "version": "1" }, "relationships": { "baseType": { "data": { "id": "Epic", "type": "workitemtypes" } } }, "type": "workitems" } }' -H localhost:8080
In response you should get ID of created item, using that you can retrieve the work item.
$ ./bin/wit-cli show workitem --id <ID> -H localhost:8080 --pp
A browsable documentation for our API is available with goa Swagger Generator. It reflects the latest state of the master branch.
In order to setup wit to work against prod preview the following environment variables must be set:
-
export F8_DEVELOPER_MODE_ENABLED=1 -
export F8_OPENSHIFT_TENANT_MASTERURL="https://console.free-stg.openshift.com/" -
export F8_KEYCLOAK_REALM="fabric8" -
export F8_CONFIG_FILE_PATH="config.yaml"
Also, F8_TENANT_SERVICEURL env var must be set and point to the prod-preview fabric8-tenant endpoint.
However, there is no publicly available route for it and one should oc login to the prod-preview OpenShift Dedicated cluster and use
port forwarding for fabric8-tenant pod:
$ oc port-forward <f8tenant-pod> <local-port>:8080
-
export F8_TENANT_SERVICEURL="http://localhost:<local-port>/"
che-starter endpoint can be configure via the following environment variable:
-
export F8_CHESTARTERURL="http://localhost:10000/"