Deucalion

High-performance Windows library for capturing decoded FFXIV packets. This library is fairly limited in scope and it is intended to be used in conjunction with other packet handling applications.

Compatibility

Deucalion only supports 64-bit versions of FFXIV using DX11.

Version 1.0.0+ is compatible with Dawntrail (FFXIV 7.0+). Older FFXIV client versions should continue to use version 0.9.x.

Features

This library can be used as a sniffer on the FFXIV packet protocol layer without concern for the lower-level TCP layer.
Deucalion runs as an injected DLL and hooks the function responsible for reading decoded packets. Therefore, this method of capture is not susceptible to the limitations of libpcap-based capture.
Deucalion functions as a broadcast server that streams captured packets to one or many subscribers.

Building

Install the nightly version of Rust for Windows.
git clone this repo.
cd into deucalion and run cargo build. The DLL will be located in target/debug/deucalion.dll.

ℹ️ A console window will appear when the DLL is running if the DLL is compiled in the debug profile. To hide the console window, compile the DLL in the release profile by supplying --release to the cargo build command.

Basic Usage

On initialization, Deucalion exposes a Named Pipe server that follows a length-delimited protocol for capturing packets or for subscriber requests.

Inject deucalion.dll into ffxiv_dx11.exe with any method you choose. If built in debug mode, a console window will appear after attaching.
Initiate a Named pipe session with Deucalion by connecting to \\.\pipe\deucalion-{FFXIV PID}. For example, if the PID of a running FFXIV process is 9000, then the name of the pipe is \\.\pipe\deucalion-9000.
Deucalion will begin broadcasting received Zone packets to all subscribers. See Data Format for information on the format of the broadcasted packets.
Deucalion will close and unload itself once all subscribers are disconnected.

ℹ️ By default, Deucalion's will not send you packets for anything other than received Zone packets. To allow other packet types, please see the Option OP section.

Payload Format

All communication with Deucalion follows this length-delimited protocol (ranges are inclusive):

bytes [0, 3]	byte 4	bytes [5, 8]	bytes [9, N]
LENGTH (u32)	OP	CHANNEL	DATA

Length

This is the total length of the entire payload, including the length bytes.

OP Types

OP	Name	Description
0	Debug	Used for passing debug text messages.
1	Ping	Used to maintain a connection between the subscriber and Deucalion. Deucalion will echo the same payload when it receives a ping.
2	Exit	Used to signal Deucalion to unload itself from the host process. In most use cases, you will not need to send this OP at all.
3	Recv	When sent from Deucalion, contains the FFXIV IPC packet received by the host process.
4	Send	When sent from Deucalion, contains the FFXIV IPC packet sent by the host process.
5	Option	Used to configure per-subscriber filtering for packets.
6	RecvOther	When sent from Deucalion, contains the FFXIV non-IPC segment received by the host process.
7	SendOther	When sent from Deucalion, contains the FFXIV non-IPC segment sent by the host process.

Channel

This is an identifier for the channel used for the payload. It is used to distinguish between streams of data (e.g., Zone packets vs Chat packets).

For Recv and Send OPs, the following CHANNELs correspond to these packet types:

CHANNEL	Name
0	Lobby
1	Zone
2	Chat

For the Debug OP, the CHANNEL 9000 indicates the HELLO CHANNEL.

Data

For payloads with OP Debug, the payload is simply debug-logged.

For payloads with OP Recv or Send, the data is the FFXIV IPC packet captured from the host process. The packets are already in the correct order, but they still need to be decoded by your application. See Data Format for more information on how to handle this data.

Payloads with OP RecvOther or SendOther will contain FFXIV non-IPC segments captured from the host process. This is also discussed in Data Format.

Subscriber Protocol

The Deucalion server is capable of receiving and handling requests from the subscriber. The CHANNEL field is used to send request context, and Deucalion will reply to the requesting subscriber with a Debug-OP payload with the same CHANNEL.

Debug OP

Any payload sent with the Debug OP with a CHANNEL other than HELLO will be simply be debug-logged and an OK response will be sent back to the requesting subscriber.

For payloads with the Debug OP and the HELLO channel, the DATA sent will be set as the nickname for the current subscriber.

These are the restrictions on the values of nickname that are accepted:

The bytes in DATA must be valid UTF-8.
Must contain only ASCII alphanumeric characters or underscores (^[A-Za-z0-9_]+$)
Must be 30 characters or less
Names are allowed to be the same as other subscribers.

For example:

Payload { OP: OP.Debug, CHANNEL: 9000, DATA: u8"TEST_CLIENT" }
// Deucalion: Nickname set response
Payload { OP: OP.Debug, CHANNEL: 9000, DATA: u8"CHANGED NICKNAME: TEST_CLIENT (subscriber 0)" }

Ping OP

Any Ping-OP payload sent to Deucalion will be echoed back to the requesting subscriber.

Exit OP

Deucalion will immediately begin unloading all hooks and cleaning itself from the host process without sending a response back to the subscriber.

⚠️ It is not required to send this OP to Deucalion! Deucalion will safely exit on its own once all subscribers are disconnected. Causing Deucalion to exit early may cause undefined behavior in subscribers that are still connected.

Recv OP

In most cases, subscribers do not need to send a Recv OP payload to initialize the hook. However if the hook has not been automatically initialized, then subscribers may send a pattern signature as a UTF-8-encoded string in a Recv OP payload in order to manually initialize the hook.

See Example for this scenario. For information on the signature format, please see https://docs.rs/pelite/latest/pelite/pattern/fn.parse.html.

⚠️ Once the Recv hook is initialized, all subscribers will receive the packet stream regardless of whether or not their own initialization succeeded. As such, it is wise to begin handling data as soon as the named pipe connection is established and handle initialization asynchronously.

Send OP

What applies to Recv OP payloads sent from subscribers also applies to Send OP payloads sent from subscribers.

However, payloads with CHANNEL set to 0 will initialize the SendLobbyPacket hook. Payloads with any other CHANNEL value will initialize the SendPacket hook (handles Chat and Zone.)

Option OP

By default, Deucalion sets a per-subscriber filter that allows only Recv Zone payloads to be sent to the subscriber.

Each subscriber can customize their own filter for what Recv or Send packets are sent by Deucalion. Other payload OPs such as Debug are not affected by this filter.

Filters can be set by sending an Option OP with bitflags as the CHANNEL.

Flag	Description
1 << 0	Allows received Lobby packets.
1 << 1	Allows received Zone packets.
1 << 2	Allows received Chat packets.
1 << 3	Allows sent Lobby packets.
1 << 4	Allows sent Zone packets.
1 << 5	Allows sent Chat packets.
1 << 6	Allows other packet types or channels.

For example, to allow received Zone, received Chat, sent Zone, and sent Chat packets, you can compute the filter value:

54 == (1 << 1 | 1 << 2 | 1 << 4 | 1 << 5)

and send the payload:

Payload { OP: OP.Option, CHANNEL: 54, DATA: <empty>}
// Deucalion: Filter set response
Payload { OP: OP.Debug, CHANNEL: 0, DATA: u8"Packet filters set: 0b00110110" }

Error Handling

Deucalion will gracefully handle error cases by responding with a Debug-OP Payload containing the error message. The error cases that are handled include but are not limited to:

DATA could not be decoded as a string.
The string could not be parsed as a valid signature.
The signature could not be found in memory.
The hook was already initialized.

Examples

Here is an example interaction between Deucalion and a subscriber:

Connecting to Deucalion will automatically allow traffic to start flowing to the subscriber.

// Deucalion: Connection established message.
Payload { OP: OP.Debug, CHANNEL: 9000, DATA: u8"SERVER HELLO. VERSION: 1.0.0. HOOK STATUS: RECV ON. SEND ON. SEND_LOBBY ON." }
// Deucalion: Data streamed to all subscribers
Payload { OP: OP.Recv, CHANNEL: 1, DATA: deucalion_segment }
...

Example when Deucalion requires sigs

// Deucalion: Connection established message.
Payload { OP: OP.Debug, CHANNEL: 9000, DATA: u8"SERVER HELLO. VERSION: 1.0.0. HOOK STATUS: RECV OFF. SEND OFF. SEND_LOBBY OFF." }
// Subscriber: Request with an invalid sig.
Payload { OP: OP.Recv, CHANNEL: 1, DATA: u8"invalid sig" }
// Deucalion: Response with an invalid sig error.
Payload { OP: OP.Debug, CHANNEL: 1, DATA: u8"Error setting up hook: Invalid signature: \"invalid sig\"..." }
// Subscriber: Request with a valid sig (as of FFXIV global version 6.35).
// Deucalion will gracefully allow subscribers to try again after an error.
Payload { OP: OP.Recv, CHANNEL: 1, DATA: u8"E8 $ { ' } 4C 8B 43 10 41 8B 40 18" }
// Deucalion: OK response
Payload { OP: OP.Debug, CHANNEL: 1, DATA: u8"OK" }
// Deucalion: Data streamed to all subscribers
Payload { OP: OP.Recv, CHANNEL: 1, DATA: deucalion_segment }

Example when attempting to reinitialize hook

If the Recv hook is already initialized, then the following scenario can happen:

// Deucalion: Connection established message.
Payload { OP: OP.Debug, CHANNEL: 9000, DATA: u8"SERVER HELLO. VERSION: 1.0.0. RECV ON. SEND ON. SEND_LOBBY ON." }
// Deucalion: Data streamed to all subscribers
Payload { OP: OP.Recv, CHANNEL: 1, DATA: deucalion_segment }

// Subscriber: Asynchronous task sending request with an valid sig.
Payload { OP: OP.Recv, CHANNEL: 1, DATA: u8"E8 $ { ' } ..." }
// Deucalion: Response with already initialized error.
Payload { OP: OP.Debug, CHANNEL: 1, DATA: u8"Error setting up hook: Detour is already initialized" }

// Deucalion: Data streamed to all subscribers
Payload { OP: OP.Recv, CHANNEL: 1, DATA: deucalion_segment2 }

If the hook has been partially initialized, then it may be necessary to recompile Deucalion with new sigs.

Data Format

Data broadcasted with the Recv or Send OP is sent to subscribers in a Deucalion-specific format:

struct DEUCALION_SEGMENT {
  uint32_t source_actor;
  uint32_t target_actor;
  uint64_t timestamp; // milliseconds since UNIX epoch
  FFXIVARR_IPC_HEADER ipc_header; // Includes reserved, type (opcode), serverId, etc.
  uint8_t packet_data[];
}

Data broadcasted with the RecvOther or SendOther OP is sent to subscribers as a plain FFXIV segment:

struct FFXIV_SEGMENT {
  FFXIVARR_PACKET_SEGMENT_HEADER segment_header;
  uint8_t segment_data[];
}

Refer to https://xiv.dev/network/packet-structure for more info.

Details

There are a multitude of terms out there for describing the same data structures and it may sometimes be confusing, so let's clarify what we mean by FFXIV packet.

TCP data arrives in individual units called segments, which may also be called TCP packets.

FFXIV data arrives in containers that are called a multitude of different things, but ultimately it does not matter so we'll call them frames here. On the wire, they may be split across multiple TCP segments, but this is a detail that is abstracted away here.

Each frame contains data that is potentially compressed, and this data typically includes one or more FFXIV segments. Each segment encapulates segment header information and the data, which is what we actually refer to as the FFXIV packet data.

Using names from https://xiv.dev/network/packet-structure, the following is a diagram of what this looks like. Deucalion extracts the innermost packet data after it has been decoded and decompressed.

┌───────────────────────────────────────────────┐
│  Frame                                        │
│ ┌───────────────────────────────────────────┐ │
│ │ FFXIVARR_PACKET_HEADER                    │ │
│ │                                           │ │
│ │ ...                                       │ │
│ │ uint32_t size;                            │ │
│ │ uint16_t connectionType;                  │ │
│ │ uint16_t segmentCount;                    │ │
│ │ ...                                       │ │
│ │ uint8_t isCompressed;                     │ │
│ │ ...                                       │ │
│ │ uint32_t decompressedSize;                │ │
│ └───────────────────────────────────────────┘ │
│ ┌───────────────────────────────────────────┐ │
│ │ Compressed Data                           │ │
│ │ ┌───────────────────────────────────────┐ │ │
│ │ │ Segment 1                             │ │ │
│ │ │ ┌───────────────────────────────────┐ │ │ │
│ │ │ │ FFXIVARR_PACKET_SEGMENT_HEADER    │ │ │ │
│ │ │ │                                   │ │ │ │
│ │ │ │ uint32_t size;                    │ │ │ │
│ │ │ │ uint32_t source_actor;            │ │ │ │
│ │ │ │ uint32_t target_actor;            │ │ │ │
│ │ │ │ uint16_t type; // SEGMENTTYPE_IPC │ │ │ │
│ │ │ │ ...                               │ │ │ │
│ │ │ ├───────────────────────────────────┤ │ │ │
│ │ │ │ FFXIVARR_IPC_HEADER               │ │ │ │
│ │ │ │                                   │ │ │ │
│ │ │ │ uint16_t reserved; // 0x0014      │ │ │ │
│ │ │ │ uint16_t type; // Opcode          │ │ │ │
│ │ │ │ uint16_t padding;                 │ │ │ │
│ │ │ │ uint16_t serverId;                │ │ │ │
│ │ │ │ uint32_t timestamp;               │ │ │ │
│ │ │ │ uint32_t padding1;                │ │ │ │
│ │ │ ├───────────────────────────────────┤ │ │ │
│ │ │ │ PACKET_DATA                       │ │ │ │
│ │ │ │ ...                               │ │ │ │
│ │ │ └───────────────────────────────────┘ │ │ │
│ │ └───────────────────────────────────────┘ │ │
│ │ ┌───────────────────────────────────────┐ │ │
│ │ │ Segment 2                             │ │ │
│ │ │ ...                                   │ │ │
│ │ └───────────────────────────────────────┘ │ │
│ └───────────────────────────────────────────┘ │
└───────────────────────────────────────────────┘

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Deucalion

Compatibility

Features

Building

Basic Usage

Payload Format

Length

OP Types

Channel

Data

Subscriber Protocol

Debug OP

Ping OP

Exit OP

Recv OP

Send OP

Option OP

Error Handling

Examples

Example when Deucalion requires sigs

Example when attempting to reinitialize hook

Data Format

Details

Files

README.md

Latest commit

History

README.md

File metadata and controls

Deucalion

Compatibility

Features

Building

Basic Usage

Payload Format

Length

OP Types

Channel

Data

Subscriber Protocol

Debug OP

Ping OP

Exit OP

Recv OP

Send OP

Option OP

Error Handling

Examples

Example when Deucalion requires sigs

Example when attempting to reinitialize hook

Data Format

Details