.appveyor.yml

environment:

  matrix:

    # For Python versions available on Appveyor, see
    # http://www.appveyor.com/docs/installed-software#python
    # The list here is complete (excluding Python 2.6, which
    # isn't covered by this document) at the time of writing.

    - PYTHON: "C:\\Miniconda-x64"
      #PYTHON: "C:\\Python27"

    #- PYTHON: "C:\\Miniconda34-x64"
    #  #PYTHON: "C:\\Python34"

    - PYTHON: "C:\\Miniconda35-x64"
      #PYTHON: "C:\\Python35"

    - PYTHON: "C:\\Miniconda36-x64"
      #PYTHON: "C:\\Python36"

    - PYTHON: "C:\\Miniconda37-x64"
      #PYTHON: "C:\\Python37"

    #- PYTHON: "C:\\Python27-x64"
    #- PYTHON: "C:\\Python33-x64"
    #  DISTUTILS_USE_SDK: "1"
    #- PYTHON: "C:\\Python34-x64"
    #  DISTUTILS_USE_SDK: "1"
    #- PYTHON: "C:\\Python35-x64"
    #- PYTHON: "C:\\Python36-x64"

install:
  # We need wheel installed to build wheels
  - "SET PATH=%PYTHON%;%PYTHON%\\Scripts;%PYTHON%\\Library\\bin;%PATH%"
  - python --version
  - conda install -q -y --channel conda-forge setuptools
  - python -m pip install coverage
  - python -m pip install nose
  - python -m pip install xlrd
  #- python -m pip install openpyxl
  - "dir %PYTHON%\\Scripts"

build: off

test_script:
  # Put your test command here.
  # If you don't need to build C extensions on 64-bit Python 3.3 or 3.4,
  # you can remove "build.cmd" from the front of the command, as it's
  # only needed to support those cases.
  # Note that you must use the environment variable %PYTHON% to refer to
  # the interpreter you're using - Appveyor does not do anything special
  # to put the Python evrsion you want to use on PATH.
  - "%PYTHON%\\python.exe setup.py develop"
  - "%PYTHON%\\Scripts\\test.pyutilib.exe --cat=nightly --cov -v"

#after_test:
  # This step builds your wheels.
  # Again, you only need build.cmd if you're building C extensions for
  # 64-bit Python 3.3/3.4. And you need to use %PYTHON% to get the correct
  # interpreter
  #- "build.cmd %PYTHON%\\python.exe setup.py bdist_wheel"

#artifacts:
  # bdist_wheel puts your built wheel in the dist directory
  #- path: dist\*

on_success:
#  You can use this step to upload your artifacts to a public website.
#  See Appveyor's documentation for more details. Or you can simply
#  access your wheels from the Appveyor "artifacts" tab for your build.
  - pip install codecov
  - codecov