State | Name | values |
---|---|---|
cfgFanMode | Fan mode | {0:disabled,1:Level 1,2:Level 2,3:Level 3} |
cfgAcChgModeFlg | AC charging mode flag | {0:?,1:?} |
cfgAcOutFreq | Inverter output frequency (Hz) | {1:50 Hz,2:60 Hz,255:ignored} |
chargerType | Charger type | {0:no charging,1:AC charging,2:DC adapter charging,3:solar charging,4:CC,5:BC} |
fanState | Fan state | {0:disabled,1:Level 1,2:Level 2,3:Level 3} |
State | Min | Max | Unit | Mult | Name |
---|---|---|---|---|---|
dcInVol | 0 | 60 | V | 0.001 | DC input voltage |
dcInAmp | 0 | 13 | A | 0.001 | DC input current |
outputWatts | 0 | 4000 | W | 1 | Discharging power |
invOutFreq | 0 | 62 | Hz | 1 | Inverter output frequency |
inTemp | 0 | 80 | °C | 1 | Inverter temperature |
outTemp | 0 | 90 | °C | 1 | Inverter temperature |
invOutVol | 0 | 250 | V | 0.001 | Actual inverter output voltage |
invInAmp | 0 | 13 | A | 0.001 | Inverter input current |
inputWatts | 0 | 4000 | W | 1 | Charging power |
invInFreq | 0 | 62 | Hz | 1 | Inverter input frequency |
invOutAmp | 0 | 13 | A | 0.001 | Inverter output current |
invInVol | 0 | 250 | V | 0.001 | Inverter input voltage |
State | Name |
---|---|
cfgAcOutVoltage | Inverter output voltage (V): 0xffffffff: ignored |
errCode | Global error code |
invType | PSDR model code |
sysVer | System version |
State | Min | Max | Unit | Mult | Name | cmd |
---|---|---|---|---|---|---|
cfgStandbyMin | 0 | 1440 | min | 1 | AC standby time /min 0 Never standby 1440 Default value | {from:Android,operateType:TCP,id:153750799,lang:en-us,params:{id:153,standByMins:360},version:1.0} |
State | off | on | Name | cmd |
---|---|---|---|---|
cfgAcEnabled | off | on | AC discharge (INV) switch setting | {from:Android,operateType:TCP,id:554272649,lang:en-us,params:{id:66,enabled:1},version:1.0} |
cfgAcXboost | off | on | X-Boost switch | {from:Android,operateType:TCP,id:602507362,lang:en-us,params:{id:66,xboost:1},version:1.0} |
State | Min | Max | Unit | Mult | Name |
---|---|---|---|---|---|
maxCellTemp | 0 | 80 | °C | 1 | Maximum cell temperature |
temp | 0 | 80 | °C | 1 | Temperature |
cycles | 0 | 6000 | 1 | Number of cycles | |
remainCap | 0 | 80000 | mAh | 1 | Remaining capacity |
vol | 0 | 60 | V | 0.001 | Voltage |
minCellVol | 0 | 60 | V | 0.001 | Minimum cell voltage |
soc | 0 | 100 | % | 1 | Remaining battery percentage |
amp | 0 | 50 | A | 0.001 | Current |
minCellTemp | 0 | 80 | °C | 1 | Minimum cell temperature |
minMosTemp | 0 | 80 | °C | 1 | Minimum MOS temperature |
maxCellVol | 0 | 60 | V | 0.001 | Maximum cell voltage |
fullCap | 0 | 80000 | mAh | 1 | Full capacity |
maxMosTemp | 0 | 80 | °C | 1 | Maximum MOS temperature |
State | Name |
---|---|
bmsFault | BMS permanent fault |
sysVer | System version |
bqSysStatReg | BQ hardware protection register |
State | Name | values |
---|---|---|
errCode | Global error code | {0:OK?} |
State | Min | Max | Unit | Mult | Name |
---|---|---|---|---|---|
wattsInSum | 0 | 500 | W | 1 | Total input power |
dcInUsedTime | 0 | 9999999 | min | 0.0166 | DC charging time |
chgPowerDC | 0 | 65000 | kWh | 0.001 | Cumulative DC power charged for PD (adapter) |
dsgPowerDC | 0 | 4000 | W | 0.1 | Discharge Power DC |
remainTime | 0 | 143999 | min | 1 | Time remaining (min) > 0: remaining charging time; time remaining (min) < 0: remaining discharging time |
usb3Watts | 0 | 500 | W | 0.1 | Common usb3 output power |
typecUsedTime | 0 | 9999999 | min | 0.0166 | Type-C use time |
typecWatts | 0 | 500 | W | 1 | Type-C output power |
usbqcUsedTime | 0 | 9999999 | min | 0.0166 | USB QC use time |
chgSunPower | 0 | 65000 | kWh | 0.001 | Cumulative solar power charged |
wattsOutSum | 0 | 4000 | W | 1 | Total output power |
carTemp | 0 | 80 | °C | 1 | CAR temperature |
usbUsedTime | 0 | 9999999 | min | 0.0166 | USB use time |
mpptUsedTime | 0 | 9999999 | min | 0.0166 | MPPT use time |
ledWatts | 0 | 100 | W | 0.1 | LED output power |
usb1Watts | 0 | 500 | W | 1 | Common usb1 output power |
dsgPowerAC | 0 | 4000 | W | 0.001 | Discharge Power AC |
chgPowerAC | 0 | 65000 | kWh | 0.001 | Cumulative AC power charged for PD (wall socket) |
carWatts | 0 | 500 | W | 0.1 | CAR output power |
carUsedTime | 0 | 9999999 | min | 0.0166 | Car use time |
usb2Watts | 0 | 500 | W | 1 | Common usb2 output power |
soc | 0 | 100 | % | 1 | Displayed SOC |
typecTemp | 0 | 80 | °C | 1 | Type-C temperature |
invUsedTime | 0 | 9999999 | min | 0.0166 | Inverter use time |
State | Name |
---|---|
model | Product model |
bmsSlave | BMS slave |
sysVer | System version |
State | Name | values |
---|---|---|
ledState | LED state | {0:off?,1:on?} |
errCode | Global error code | {0:OK?} |
State | off | on | Name | cmd |
---|---|---|---|---|
beepState | normal | quiet | Beep status | {from:Android,operateType:TCP,id:834553333,lang:en-us,params:{id:38,enabled:1},version:1.0} |
carSwitch | off | on | Car charger switch | {from:Android,operateType:TCP,id:689699572,lang:en-us,params:{id:34,enabled:1},version:1.0} |
State | Min | Max | Unit | Mult | Name | cmd |
---|---|---|---|---|---|---|
standByMode | 0 | 5999 | min | 1 | Device standby time /min 0 Never standby 5999 Max value | {from:Android,operateType:TCP,id:119032574,lang:en-us,params:{id:33,standByMode:360},version:1.0} |