Skip to content

Latest commit

 

History

History
91 lines (63 loc) · 3.34 KB

README.md

File metadata and controls

91 lines (63 loc) · 3.34 KB
Raw

Gluon Status Scripts for Servers

These scripts are replacements for the respondd and gluon-alfred packages in Gluon that can be used on servers (like gateways) to broadcast the information needed for example to display the name of the server on node-maps.

Dependencies

  • lsb_release
  • ethtool
  • python3 (>= 3.3)
  • If using alfred: alfred binary in PATH

Setup

git clone https://github.com/ffnord/mesh-announce /opt/mesh-announce
cp /opt/mesh-announce/respondd.service /etc/systemd/system/
# adapt the line ExecStart in /etc/systemd/system/respondd.service (see "commandline options")
systemctl daemon-reload
systemctl start respondd
systemctl status respondd

Upgrade

cp /opt/mesh-announce/respondd.service /etc/systemd/system/
git pull
# check /etc/systemd/system/respondd.service for new options/adaptions
systemctl daemon-reload
systemctl restart respondd
systemctl status respondd

Alfred

Open the Alfred port UDP 16962 in your firewall. Add announce.sh to your cronjobs, and let it run every minute, e.g.

PATH=/opt/alfred/:/bin:/usr/bin:/sbin:$PATH /opt/mesh-announce/announce.sh

Respondd

Assuming you are using systemd, copy the respondd.service file to /etc/systemd/system/. Open the copy and adapt the path to your checkout of the repository and the interface names in the line starting with ExecStart=. Afterwards, start the service and optionally set it to autostart:

systemctl daemon-reload
systemctl start respondd
# autostart on boot
systemctl enable respondd

Furthermore, you have to open UDP port 1001 in your IPv6 firewall for all mesh and B.A.T.M.A.N. advanced interfaces. Please don't open the port globally, as it can be used for traffic amplification attacks. You also might want to ratelimit it on the allowed interfaces for the same reason.

commandline options

Those are all available options (respondd --help):

respondd.py [-p <port>] [-g <group> -i <if0> [-i <if1> ..]] [-d <dir>]

for example:

respondd.py -d /opt/mesh-announce/providers -i <your-clientbridge-if> -i <your-mesh-vpn-if> -b <your-batman-if> -m <mesh ipv4 address>
  • <your-clientbridge-if>: interfacename of mesh-bridge (for example br-ffXX)
  • <your-mesh-vpn-if>: interfacename of fastd or tuneldigger (for example ffXX-mvpn)
  • <your-batman-if>: B.A.T.M.A.N interfacename (usually bat-ffXX)
  • <mesh ipv4 address>: The ipv4 address of this gateway (usually the ip on interface )
    you can get the ip with ip a s dev br-ffXX|grep inet|head -n1|cut -d\ -f 6|sed 's|/.*||g'

The ipv4 address can be requested for example by ddhcpd via

gluon-neighbour-info -p 1001 -d ff02::1 -i bat0 -r gateway

This will request all json objects for all gateways. The json object for the gateway can then be selected by the known macadress. The ip4 is stored in node_id.address.ipv4.

Debugging

When something goes wrong, the first step should be to look at the error log:

sudo journalctl -u respondd.service