Skip to content
Ruben Barkow edited this page Nov 23, 2015 · 22 revisions

For basic USB support you need to add these packages in

GLUON_SITE_PACKAGES := \
    ...
    kmod-usb-core \
    kmod-usb2 \

If you want to be able to mount Fat32-USB-devices, you need these additional packages:

    block-mount \
    kmod-fs-ext4 \
    kmod-fs-vfat \
    kmod-usb-storage  \
    kmod-usb-storage-extras  \
    blkid  \
    swap-utils  \
    kmod-nls-cp1250  \
    kmod-nls-cp1251  \
    kmod-nls-cp437  \
    kmod-nls-cp775  \
    kmod-nls-cp850  \
    kmod-nls-cp852  \
    kmod-nls-cp866  \
    kmod-nls-iso8859-1  \
    kmod-nls-iso8859-13  \
    kmod-nls-iso8859-15  \
    kmod-nls-iso8859-2  \
    kmod-nls-koi8r  \
    kmod-nls-utf8

#Example by Model Use GLUON_$(PROFILE)_SITE_PACKAGES for each model, where $(PROFILE) is the model you get from profiles.mk

To enable simple USB support for only some models with at least 8MB RAM add these lines in your site.mk:

#ar71xx-generic
GLUON_TLWR710_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_TLWR842_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_TLWR1043_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_TLWR2543_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_TLWDR4300_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_WNDR3700_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_WRT160NL_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_DIR825B1_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_GLINET_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_WZRHPG450H_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_WZRHPAG300H_SITE_PACKAGES := kmod-usb-core kmod-usb2
GLUON_ARCHERC7_SITE_PACKAGES := kmod-usb-core kmod-usb2

#mpc85xx-generic
GLUON_TLWDR4900_SITE_PACKAGES := mod-usb-core kmod-usb2

#Example by Target:

ifeq ($(GLUON_TARGET),x86-generic)
# support the usb stack on x86 devices
# and add a few common USB NICs
GLUON_SITE_PACKAGES += \
	kmod-usb-core \
	kmod-usb2 \
	kmod-usb-hid \
	kmod-usb-net \
	kmod-usb-net-asix \
	kmod-usb-net-dm9601-ether
endif
Clone this wiki locally