ESP32 driver for Microchip MCP3204 and MCP3208 12-bit ADCs.
- ESP-IDF: v5.3
- Written in C using just the ESP-IDF Framework.
- Testable: 20+ tests.
Everything is at the docs folder.
Build options:
- Compile optimized for size (
CONFIG_COMPILER_OPTIMIZATION_SIZE=y
). - Error logging (
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
).
DRAM (bss,data) | Flash (code,rodata) |
---|---|
0 B | 1.39 KB |
#include "driver/spi_master.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "esp32_driver_mcp320x/mcp320x.h"
void app_main(void)
{
spi_bus_config_t bus_cfg = {
.mosi_io_num = GPIO_NUM_23,
.miso_io_num = GPIO_NUM_19,
.sclk_io_num = GPIO_NUM_18,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
.data4_io_num = -1,
.data5_io_num = -1,
.data6_io_num = -1,
.data7_io_num = -1,
.max_transfer_sz = 3, // 24 bits.
.flags = SPICOMMON_BUSFLAG_MASTER,
.isr_cpu_id = INTR_CPU_ID_AUTO,
.intr_flags = ESP_INTR_FLAG_LEVEL3};
mcp320x_config_t mcp320x_cfg = {
.host = SPI3_HOST,
.device_model = MCP3204_MODEL,
.clock_speed_hz = 1 * 1000 * 1000, // 1 Mhz.
.reference_voltage = 5000, // 5V
.cs_io_num = GPIO_NUM_5};
// Bus initialization is up to the developer.
spi_bus_initialize(mcp320x_cfg.host, &bus_cfg, 0);
// Add the device to the SPI bus.
mcp320x_t *mcp320x_handle = mcp320x_install(&mcp320x_cfg);
// Occupy the SPI bus for multiple transactions.
mcp320x_acquire(mcp320x_handle, portMAX_DELAY);
uint16_t voltage = 0;
for (size_t i = 0; i < 10; i++)
{
// Read voltage, sampling 1000 times.
mcp320x_read_voltage(mcp320x_handle,
MCP320X_CHANNEL_0,
MCP320X_READ_MODE_SINGLE,
1000,
&voltage);
ESP_LOGI("mcp320x", "Voltage: %d mV", voltage);
}
// Unoccupy the SPI bus.
mcp320x_release(mcp320x_handle);
// Free resources.
mcp320x_delete(mcp320x_handle);
}
To contribute to this project make sure to read our CONTRIBUTING.md file.