Arch Linux install scripts

WARNING: Running install.sh with delete all data in nvme0n1 and nvme1n1 (if using RAID0) without confirmation.

Requirements

Name	Type	FS Type	Mountpoint	Size
nvme0n1	disk
├─nvme0n1p1	part	FAT32	/boot	1GiB
├─nvme0n1p2	part	LUKS2
├──system	crypt	EXT4	/	Rest of disk

Disable secure boot and delete secure boot keys (automatically enters setup mode)
Boot into Arch Linux ISO
Connect to the internet. If using wifi, you can use iwctl to connect to a network:
- scan for networks: station wlan0 scan
- list available networks: station wlan0 get-networks
- connect to a network: station wlan0 connect SSID
Update repos and install git: pacman -Sy git
(if previous step fails) Init and populate keyring: pacman-key --init && pacman-key --populate
Clone repo: git clone https://github.com/gjpin/arch-linux.git
Run script: cd arch-linux && ./install.sh
Reboot and enable secure boot
Enroll LUKS key in TPM2: sudo systemd-cryptenroll --tpm2-pcrs=0+1+7 --tpm2-device=auto /dev/nvme0n1p2 OR /dev/md/ArchArray (if RAID0)
Re-configure p10k: p10k configure
Install Flatpak and applications:

curl -LO https://raw.githubusercontent.com/gjpin/arch-linux/main/flatpak.sh
chmod +x flatpak.sh
./flatpak.sh
rm -f flatpak.sh

AppArmor.d profiles are installed in complain mode, by default. See Enforce Mode