Merge branch 'development'

include/Huawei_can.h

@@ -4,6 +4,7 @@
 #include <cstdint>
 #include "SPI.h"
 #include <mcp_can.h>
+#include <mutex>
 
 #ifndef HUAWEI_PIN_MISO
 #define HUAWEI_PIN_MISO 12
@@ -34,35 +35,45 @@
 
 #define MAX_CURRENT_MULTIPLIER 20
 
+// Index values for rec_values array
+#define HUAWEI_INPUT_POWER_IDX 0
+#define HUAWEI_INPUT_FREQ_IDX 1
+#define HUAWEI_INPUT_CURRENT_IDX 2
+#define HUAWEI_OUTPUT_POWER_IDX 3
+#define HUAWEI_EFFICIENCY_IDX 4
+#define HUAWEI_OUTPUT_VOLTAGE_IDX 5
+#define HUAWEI_OUTPUT_CURRENT_MAX_IDX 6
+#define HUAWEI_INPUT_VOLTAGE_IDX 7
+#define HUAWEI_OUTPUT_TEMPERATURE_IDX 8
+#define HUAWEI_INPUT_TEMPERATURE_IDX 9
+#define HUAWEI_OUTPUT_CURRENT_IDX 10
+#define HUAWEI_OUTPUT_CURRENT1_IDX 11
+
+// Defines and index values for tx_values array
 #define HUAWEI_OFFLINE_VOLTAGE 0x01
 #define HUAWEI_ONLINE_VOLTAGE 0x00
 #define HUAWEI_OFFLINE_CURRENT 0x04
 #define HUAWEI_ONLINE_CURRENT 0x03
 
-#define R48xx_DATA_INPUT_POWER 0x70
-#define R48xx_DATA_INPUT_FREQ 0x71
-#define R48xx_DATA_INPUT_CURRENT 0x72
-#define R48xx_DATA_OUTPUT_POWER 0x73
-#define R48xx_DATA_EFFICIENCY 0x74
-#define R48xx_DATA_OUTPUT_VOLTAGE 0x75
-#define R48xx_DATA_OUTPUT_CURRENT_MAX 0x76
-#define R48xx_DATA_INPUT_VOLTAGE 0x78
-#define R48xx_DATA_OUTPUT_TEMPERATURE 0x7F
-#define R48xx_DATA_INPUT_TEMPERATURE 0x80
-#define R48xx_DATA_OUTPUT_CURRENT 0x81
-#define R48xx_DATA_OUTPUT_CURRENT1 0x82
-
+// Modes of operation
 #define HUAWEI_MODE_OFF 0
 #define HUAWEI_MODE_ON 1
 #define HUAWEI_MODE_AUTO_EXT 2
 #define HUAWEI_MODE_AUTO_INT 3
 
+// Error codes
+#define HUAWEI_ERROR_CODE_RX 0x01
+#define HUAWEI_ERROR_CODE_TX 0x02
+
 // Wait time/current before shuting down the PSU / charger
 // This is set to allow the fan to run for some time
 #define HUAWEI_AUTO_MODE_SHUTDOWN_DELAY 60000
 #define HUAWEI_AUTO_MODE_SHUTDOWN_CURRENT 1.0
 
-struct RectifierParameters_t {
+// Updateinterval used to request new values from the PSU
+#define HUAWEI_DATA_REQUEST_INTERVAL_MS 2500
+
+typedef struct RectifierParameters {
     float input_voltage;
     float input_frequency;
     float input_current;
@@ -75,6 +86,33 @@ struct RectifierParameters_t {
     float output_power;
     float output_temp;
     float amp_hour;
+} RectifierParameters_t;
+
+class HuaweiCanCommClass {
+public:
+    bool init(uint8_t huawei_miso, uint8_t huawei_mosi, uint8_t huawei_clk, uint8_t huawei_irq, uint8_t huawei_cs);
+    void loop();
+    bool gotNewRxDataFrame(bool clear);
+    uint8_t  getErrorCode(bool clear);
+    uint32_t getParameterValue(uint8_t parameter);
+    void setParameterValue(uint16_t in, uint8_t parameterType);
+
+private:
+    void sendRequest();
+
+    SPIClass *SPI;
+    MCP_CAN  *_CAN;
+    uint8_t  _huaweiIrq;                         // IRQ pin
+    uint32_t _nextRequestMillis = 0;              // When to send next data request to PSU 
+
+    std::mutex _mutex;
+
+    uint32_t _recValues[12];
+    uint16_t _txValues[5];
+    bool     _hasNewTxValue[5];
+
+    uint8_t _errorCode;
+    bool _completeUpdateReceived;
 };
 
 class HuaweiCanClass {
@@ -89,26 +127,24 @@ class HuaweiCanClass {
     bool getAutoPowerStatus();
 
 private:
-    void sendRequest();
-    void onReceive(uint8_t* frame, uint8_t len);
+    void processReceivedParameters();
 
-    SPIClass *spi;
-    MCP_CAN *CAN;
+    TaskHandle_t _HuaweiCanCommunicationTaskHdl = NULL;
     bool    _initialized = false;
-    uint8_t _huawei_irq;             // IRQ pin
-    uint8_t _huawei_power;           // Power pin
+    uint8_t _huaweiPower;           // Power pin
     uint8_t _mode = HUAWEI_MODE_AUTO_EXT;
 
     RectifierParameters_t _rp;
 
     uint32_t _lastUpdateReceivedMillis;           // Timestamp for last data seen from the PSU
-    uint32_t _nextRequestMillis = 0;              // When to send next data request to PSU 
-    uint32_t _nextAutoModePeriodicIntMillis;      // When to send the next output volume request in Automatic mode
-    uint32_t _lastPowerMeterUpdateReceivedMillis; // Timestamp of last power meter value
     uint32_t _outputCurrentOnSinceMillis;         // Timestamp since when the PSU was idle at zero amps
-    bool _newOutputPowerReceived = false;
-    uint8_t _autoPowerEnabled = false;
-    bool _autoPowerActive = false;
+    uint32_t _nextAutoModePeriodicIntMillis;      // When to set the next output voltage in automatic mode
+    uint32_t _lastPowerMeterUpdateReceivedMillis; // Timestamp of last seen power meter value
+    uint32_t _autoModeBlockedTillMillis = 0;      // Timestamp to block running auto mode for some time
+
+    uint8_t _autoPowerEnabledCounter = 0;
+    bool _autoPowerEnabled = false;
 };
 
 extern HuaweiCanClass HuaweiCan;
+extern HuaweiCanCommClass HuaweiCanComm;