Skip to content

Latest commit

 

History

History
362 lines (268 loc) · 13.4 KB

CONTRIBUTING.md

File metadata and controls

362 lines (268 loc) · 13.4 KB
Raw

Contributing to RIOT

Thank you for your interest in contributing to RIOT! There are many ways to contribute, and we appreciate all of them. You can jump to the major sections of this document using the following links:

If you have questions, please write a post over at our forum or chat on #riot-os:matrix.org on Matrix.

As a reminder, all contributors are expected to follow our Code of Conduct.

Getting Started

If you are just beginning to work with RIOT you might first want to read our documentation. Especially the following sections might be of interest to you

Bug reports and feature requests

Both bug reports and feature request, big or small, are welcome.

Before submitting a feature request, please check if an open issue already exists. If this is not the case, submit a feature request. Describe your use case, why you need this feature and why this feature is important for RIOT.

Before filing a bug report, please check if an open issue already exists. If this is not the case, submit a new bug report. If you're not sure if something is a bug or not, feel free to file a bug report anyway.

If you believe reporting your bug publicly represents a security risk to RIOT users, please send an email describing the bug to security@riot-os.org. We would appreciate waiting for a 6 months grace period before reporting it on public channels, to allow us adequate time to release the fix.

Contributing code

If you think your work should be integrated in the main RIOT repository, take the following steps:

  1. Fork the RIOT git repository (if you haven't done this already).
  2. Create a branch for your contribution.
  3. Make sure your code is in compliance with RIOTs coding conventions.
  4. Make commits. Make sure to follow RIOTs commit conventions.
  5. Push this branch to your fork on GitHub.
  6. Open a pull request. See pull requests.
  7. RIOT maintainers will set labels and provide feedback.
  8. Address this feedback. See working with git.
  9. Your code is merged in RIOT master branch when it passes review.

Be sure to read the general tips below.

General Tips

From experience, the following recommendations help to get a software contribution into RIOT master faster:

  • Ask around for help! Either offline or through one of our communication channels (see above). The earlier you check your feature design with other people, the less likely it is that it is denied during the review process.
  • Verify your concept early! If you work on your own until the code looks good enough to show publicly, you might miss some design flaws others might have spotted earlier.
  • Keep it simple! Try to use what is already there and don't change existing APIs if not absolutely necessary.
  • Keep it small! A PR with >1000 lines of changes will very likely make even the most active reviewer put your review on their long to-do list.
  • Keep it modular! Make extensions to a feature or new features for a platform optionally to use.
  • Provide tests! They should be comprehensible and easy to be executed. Alternatively comprehensive testing procedures should be provided with your pull request.

Coding conventions

RIOT has extensive coding conventions. It is possible to check if your code follows these conventions:

  • You can uncrustify .c and .h files:

    $ uncrustify -c $RIOTBASE/uncrustify-riot.cfg --no-backup <your file>

    Note: The --no-backup flag makes uncrustify replace the current file with a formatted version.

  • RIOT provides static test tools to verify the quality of changes (cppcheck, trailing whitespaces, documentation, etc). These tools are wrapped in a single make target: static-test.

    Watch out: the command below will rebase your branch on your master branch, so make sure they can be rebased (e.g. there's no potential conflict).

    $ make static-test

    Use it before opening a PR to perform last time checks.

Commit conventions

  • Each commit should target changes of specific parts/modules of RIOT. The commits use the following pattern:

    area of code: description of changes

    You can use multi-line commit messages if you want to detail more the changes. For example:

    periph/timer: Document that set_absolute is expected to wrap

Most timers are implemented this way already, and keeping (documenting)
it that way allows the generic timer_set implementation to stay as
simple as it is.

Pull Requests

GitHub's Pull Request (PR) feature is the primary mechanism used to make contributions to the RIOT codebase. GitHub itself has some great documentation on using the Pull Request feature. We use the fork and pull model, where contributors push changes to their personal fork and create pull requests to bring those changes into the source repository.

  • Before opening a new Pull Request, have a look at existing ones. Maybe someone has already opened one about the same thing. If it's the case, you might be able to help with the contribution. Just comment on the PR and ask. Include closed PR's in your search, as previous work might have been closed for lack of interest. Old and stalled PRs are sometimes archived with the "State: archived" label, maybe one of them is also about the same topic.

  • The Pull Request title should reflect what it is about and be in the same form as the commit conventions.

  • Each Pull Request form uses a template that is there to help maintainers understand your contribution and help them in testing it. Please fill each section with as much information as possible.

  • We recommend that you leave the 'Allow edits from maintainers' check box ticked. This will allow maintainer finalizing your PR by pushing in your branch. In general, this speeds up the PR merge in the main repository. Note that this is not an obligation.

  • Remember that smaller PRs tend to be merged faster, so keep your changes as concise as possible. They should be confined to a single explainable change, and be runnable on their own. So don't hesitate to split your PRs into smaller ones when possible.

  • Maintainers try their best to review every PR as fast as possible, but they are also only human and it can happen that they miss a few PRs or might be preoccupied with other PRs. If it happens that your PR receives no review for a long time, don't hesitate to gently solicit a review by commenting or by explicitly mentioning a maintainer that you know is knowledgeable in the area of the PR. You can also advertise the PR on the forum and ask for a review there.

  • Try to answer reviews as quickly as possible to speed up the review process and avoid stalled PRs.

You can find more information about RIOT development procedure on this wiki page.

Writing Documentation

Documentation improvements are always welcome and a good starting point for new contributors. This kind of contribution is merged quite quickly in general.

RIOT documentation is built with doxygen. Doxygen is configured to parse header (.h) and doc.txt files in the RIOT source code to generate the modules, cpus, boards and packages documentation. General documentation pages are written in Markdown and located in doc/doxygen/src.

To generate the documentation, simply run the following from the base directory of the RIOT source code.

$ make doc

The generated documentation is located in doc/doxygen/html

Working with Git

Using git is a bit difficult for newcomers. If you are completely new to git, we recommend that you start by learning it a bit. You can also read the official getting started documentation.

In this section, we give the bare minimum for a better experience with our development workflow on GitHub.

Setup your local RIOT repository

Before you start modifying code, you need to fork the RIOT upstream repository from the RIOT main GitHub page.

If it's your first time with git, configure your name and emails:

$ git config --global user.name = "<your name here>"
$ git config --global user.email = "<your email address here>"

Then clone locally your fork of RIOT (replace account name with your actual login on GitHub):

$ git clone git@github.com:<account name>/RIOT.git

You can keep any branch of your local repository up-to-date with the upstream master branch with the following commands:

$ git checkout <branch name>
$ git pull --rebase https://github.com/RIOT-OS/RIOT.git

Use it before opening a PR. This will at least ensure the PR is mergeable but also that it is up-to-date with the upstream repository.

Work on branches

Avoid opening PR from the master branch of your fork to the master branch of the RIOT upstream repository: update your master branch and start a new branch from it.

$ git checkout master
$ git pull --rebase https://github.com/RIOT-OS/RIOT.git
$ git checkout -b <new branch>

Do your changes, commit, update with latest upstream master

$ git push

Add fixup commits during review

To keep the history of changes easier to track for reviewers, it is recommended to push your review request updates in fixup commits.

Let's say your PR contains 3 commits with comments: prefix1: change 1, prefix2: change 2 and prefix3: change 3.

Instead of committing changes in prefix2 in a 4th commit prefix2: change 4, you can use the --fixup option:

$ git add /path/of/prefix2
$ git commit --fixup <prefix2 commit hash>

Squash commits after review

Squashing a commit is done using the rebase subcommand of git in interactive mode:

$ git rebase master -i

You can find information on rebasing in GitHub rebase documentation.

If you used fixup commits during the review phase, squashing commits can be performed in a single command:

$ git rebase -i --autosquash

Watch out: Don't squash your commit until a maintainer asks you to do it.

Otherwise the history of review changes is lost and for large PRs, it makes it difficult for the reviewer to follow them. It might also happen that you introduce regression and won't be able to recover them from previous commits.

If you encounter a merge conflict you could either resolve it by hand with an editor and use

$ git add -p

To add your changes or use a merge tool like meld to resolve your merge conflict.

$ git mergetool

After the merge conflict is resolved you can continue to rebase by using

$ git rebase --continue

Once squashing is done, you will have to force push your branch to update the PR:

$ git push --force-with-lease