Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

"Codecs Incompatible" but only outbound #1047

Open
xenotropic opened this issue Oct 19, 2022 · 1 comment
Open

"Codecs Incompatible" but only outbound #1047

xenotropic opened this issue Oct 19, 2022 · 1 comment

Comments

@xenotropic
Copy link

I have Sipdroid connected to a Voip.ms account with a DID. When I dial in to that DID number, calls work fine, and Sipdroid says "G722 HD Voice". So far so good.

When I try to call out, Sipdroid says "ERROR: Codecs Incompatible". I'm no SIP expert but these seem like they should be the same servers talking to each other with the same available codecs, right? Looking through the list it seems like both G722 and GSM are in the lists for Voip.ms and Sipdroid. Any idea what's going on here or what I might try?

@OzzDizz
Copy link

OzzDizz commented Jan 14, 2024

I have the same issue.
Strangely, if I disable the "Encrypted SIP Traffic" on the voip.ms side for that sub-account, then outgoing calls over TLS (port 5061) work fine but then registration fails with 403 forbidden so incoming calls no longer work.

So with the exact same config in SIPdroid (TLS, port 5061), incoming calls work fine with "Encrypted SIP Traffic" enabled on SIP traffic (but outgoing calls fail with a codec error).

It seems like enabling/disabling this option on the voip.ms side will flip back and forth between allowing calls either in the incoming or outgoing direction, but neither option works in both directions.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants