The shape of the model can't be displayed

[myl-Giser]

I have a dgn file containing four models, two of which are mesh and two of which are shape, as follows:
https://user-images.githubusercontent.com/81339378/232998179-cbead6c4-7016-4a03-807d-ecc87f9a9434.png
But I used Synchronizer to sync itwin, and when I opened it, everything was displayed as a mesh, and only one part of the model was displayed as a shape,as follows:
https://user-images.githubusercontent.com/81339378/233001376-2b3a6759-b7d6-4671-a8d0-d9c92c70f26f.png
Why is this and how can it be fixed?
This is my dgn file.
models.zip

[pratikshan85]

@myl-Giser We are checking with our internal dev team to solve the issue.

[pratikshan85]

@myl-Giser Have you rerun the Synchronizer once again?
If not please rerun the Synchronizer for that particular project id and check once again.

[myl-Giser]

@pratikshan85 I rerun the Synchronizer, and it still doesn't change.
My iTwin Synchronizer version is 1.1.353,Does it matter？

[pratikshan85]

@myl-Giser Can you please try running the synchronizer through cloud service and check?
Please update your Synchronizer version to

Then run your Synchronizer to check the result.

[myl-Giser]

hi,pratikshan85.
Do I need to update Synchronizer or update MicroStation?

[pratikshan85]

@myl-Giser Update Synchronizer.

[myl-Giser]

hi,pratikshan85,I ran the synchronizer through the cloud service and the results were correct,as follows:
https://user-images.githubusercontent.com/81339378/234520628-59d4e293-2c80-4574-bd67-93ff68bd90f7.png
But I used itwin Synchronizer client to synchronize the result is still wrong,
My Synchronizer version has been updated, as follows:
https://user-images.githubusercontent.com/81339378/234522025-7ab669b6-f9f6-4522-b9ad-edd534cd824f.png

[myl-Giser]

@pratikshan85 Thans for you reply,Now the results are correct.
I want to know what you has been modified,What version of itwin.js do you use.
Thanks！

[myl-Giser]

@pratikshan85 I want to know what causes this problem，Is it related to the version of itwin.js?Which version of itwin.js are you using？

[pratikshan85]

@myl-Giser The issue is not about the iTwin.js version. If you run a connector then this is the default behavior that you are getting. To get the expected behavior (as you wanted) internally we need to set a flag in the connector and that is what we did for now.

[myl-Giser]

@pratikshan85 How to set the flag in the connector？
I used Get started on the official website to create the imodel and uploaded file it from the local，but it was wrong.

[pratikshan85]

@myl-Giser By default the behavior of the connector is what you are getting (everything was displayed as a mesh, and only one part of the model was displayed as a shape).To get your desired result you need to request us and we will internally update the flag based on ProjectId.