Skip to content

Latest commit

 

History

History
192 lines (111 loc) · 9.98 KB

README.md

File metadata and controls

192 lines (111 loc) · 9.98 KB
Raw

TRAPP

TRAPP framework for Traffic Reconfiguration via Adaptive Participatory Planning

Read about TRAPP

Installation

  1. Download and install the latest version SUMO (v1.2.0).

    • On debian or ubuntu, SUMO can be installed simply via:

       sudo add-apt-repository ppa:sumo/stable
 sudo apt-get update
 sudo apt-get install sumo sumo-tools sumo-doc

    • On Mac OSX we recommend using Homebrew:

       brew tap dlr-ts/sumo
 brew install sumo

    • If you have to build SUMO from source using these commands:

       sudo apt-get install -y build-essential git libxerces-c-dev
 sudo mkdir -p /opt && sudo cd /opt
 sudo git clone https://github.com/radiganm/sumo.git
 sudo cd /opt/sumo && sudo ./configure
 sudo cd /opt/sumo && sudo make
 sudo cd /opt/sumo && sudo make install

  2. Set SUMO_HOME environment variable the folder of your SUMO intallation.

    • Hint: If SUMO is installed via the regular distribution in debian/ubuntu, it is installed at /usr/share/sumo.
    • Hint 2: On Mac OSX look at /usr/local/opt/sumo@X.X

  3. Clone the latest TRAPP version from github via git clone https://github.com/iliasger/TRAPP.git

  4. Navigate to the newly created TRAPP folder.

  5. If setuptools are not installed in your system, install them.

  6. Install the python dependencies of TRAPP by issuing (inside the newly created TRAPP folder): python setup.py install

  7. Download the 0.0.1 release of EPOS and unzip it. Note the path to the path in the unzipped folder.

  8. Open the file app/Config.py inside the TRAPP project in an editor of your choice and set the value of the epos_jar_path variable to the above path.

Try it out!

  1. Download and install Virtualbox.

  2. Download the OVA file available from this Zenodo artifact and import it in Virtualbox. Give the VM at least 2GB of RAM to run.

  3. Login to the VM by using the seams19 password. (Disconnect any external monitors or keyboard/mouse if you face problems with the display in Virtualbox.)

  4. Open the Terminal and navigate to the /home/seams19/TRAPP folder.

  5. Make sure that you have the latest code by issuing git pull.

  6. Perform a sample run by issuing python run.py. Upon startup the following lines should be printed: Bannner

    and the SUMO Graphical User Interface (GUI) should open with the map of Eichstaett: Bannner

  7. Click on the Start button (Bannner) to start the simulation.

  8. Inspect the cars moving in the simulation. You can zoom in and out with mouse scrolling.

  9. After a few seconds, the following should be printed to the console, indicating that an adaptation run starts:

    Bannner

  10. Shortly after, the following should be printed to the console, indicating that an EPOS run has started:

    Bannner

    An EPOS run prints out a wealth of information, including the configuration of the run:

    Bannner

    When an EPOS run finishes, a corresponding message is printed:

    Bannner

    An EPOS run can comprise multiple simulations. We have configured EPOS to run a single simulation per run. This can be changed via the numSimulations parameter in config/epos.properties.

  11. After that, inspect the rest of the outputs until the termination of the simulation.

Note: Error messages similar to Bannner may be printed after an EPOS run. This is an indicator that a certain cars couldn't be rerouted (since that would necessitate that they do a U-turn, which is not possible to perform in SUMO). We plan to deal with this special case in a future release--for now, such messages can safely be ignored.

Step-by-Step Instructions

These step-by-step instructions are a mini-tutorial to get someone familiar with TRAPP. The instructions assume that the VM is started, the user is logged in and has navigated to the /home/seams19/TRAPP folder. To edit files, you can either use vim/gedit or PyCharm (pinned in Favorites bar on the left). We recommend to use PyCharm to inspect the code and project structure.

Load Balancing strategy

We will first run the LoadBalancing strategy available at app/adaptation/strategy/LoadBalancing.py with different thresholds and inspect and compare the results.

  1. Open app/Config.py and inspect the configurations. Verify that adaptation_strategy is set to "load_balancing" and (optionally, for performance reasons) set sumoUseGUI to False.

  2. Open app/adaptation/strategy/LoadBalancing.py and verify that the implementation of the plan method includes:

    if mean_overhead > 3.5:
	print "Mean overhead threshold reached!"
	return 0.9

  3. Navigate to /home/seams19/TRAPP and issue python run.py.

    The program starts by adding 600 cars to the simulation.

    Every 100 ticks, an adaptation run is invoked (adaptation_period var. in Config.py).

    Every 100 ticks, a planning run is invoked (planning_period variable in Config.py).

    Wait until the simulation finishes. The simulation should take ~5 mins or less with the simulation horizon of 300 ticks (simulation_horizon variable in Config.py).

  4. Navigate to the data folder and rename the files "overheads.csv" and "streets.scv" to "overheads-1.csv" and "streets-1.scv" respectively.

    We will use these files in the analysis later on and renaming ensures that they are not lost in the next simulation run.

  5. The execute phase of the adaptation runs was not triggered in the previous run since the average overhead was not more than 3.5.

    Now, we will perform a simulation where the execute plase is triggered and the beta parameter of planning decreases.

    This corresponds to increasing the altrouism of the agents, that hopefully also reduces the trip overheads via achieving load balancing in the traffic network.

    To do this, open app/adaptation/strategy/LoadBalancing.py and change the line

    if mean_overhead > 3.5:

    to

    if mean_overhead > 1.2:

  6. Navigate to the /home/seams19/TRAPP and issue python run.py.

    Inspect that the "beta" is set to 0.9 already in the first adaptation run. Wait until the simulation finishes.

  7. This simulation has generated two more files ("overheads.csv" and "streets.scv") in the data folder of the project.

  8. We will now analyze the results from the two simulation we performed.

    To do this, being at the parent folder of the project (/home/seams19/TRAPP) and issue jupyter notebook. This opens a new tab in the browser.

  9. Click on the "SEAMS example.ipynb". This will open a new tab. If asked which kernel to use, pick either of the two.

  10. Click anywhere in the first cell and issue Shift+Enter. This will run the Python script of the first shell and plot graphs which, together with the printed statistics, can be used to determine the difference in trip overheads between the 2 simulation runs.

    The graphs (boxplots) should look similar to:

    Bannner

  11. Do the same for the second cell of the notebook and inspect the statistics and the graphs on street utilizations.

    The value of variance of street utilization for the 90% selfish case (2nd simulation performed) should be lower than the 100% selfish case (1st simulation performed).

  12. Congratulations! You have successfully run two different variants of an adaptation strategy and compared their results. In real settings, the simulation time would be larger in order to collect more data and increase the validity of the comparison. Also, the plan phase of this strategy can be much more complex than simply comparing to a threshold.

Avoid Overloaded Streets strategy

Let's now run the AvoidOverLoadedStreets strategy. In this strategy, street utilization is monitored. Streets that are considered overloaded (based on a comparison to a threhold value) are included in an EPOS signal so that they are avoided in the next planning step.

  1. Open app/Config.py and set the adaptation_strategy parameter to "avoid_overloaded_streets".

  2. Navigate to the /home/seams19/TRAPP and issue python run.py. Inspect the messages about overloaded streets printed in the console.

  3. Open app/adaptation/strategy/AvoidOverLoadedStreets.py and inspect its logic.

Tune Planning Resolution strategy

Finally, let's now run the TunePlanningResolution strategy, which is also the most complicated one. In this strategy, the actual average utilization of each street in each step is compared to the value predicted by EPOS. Large differences (errors) there indicate that there is a big drift between these values, which the strategy tries to rectify by planning more often.

  1. Open app/Config.py and set the adaptation_strategy parameter to "tune_planning_resolution".

  2. Navigate to the /home/seams19/TRAPP and issue python run.py. Inspect the message about mean errors and changing of planning parameters printed in the console at simulation tick 200.

  3. When the simulation ends, navigate to the root of the project and open "TunePlanningResolution-200.png". This shows the errors between the actual street utilizations and the EPOS-predicted ones, for each street and for each planning step, at simulation tick 200.

  4. Open app/adaptation/strategy/TunePlanningResolution.py and inspect its logic.

Troubleshooting

If you need help in using or extending TRAPP, feel free to contact us: