Python package for Kivy Android USB serial port.
Please try the Android App built with usbserial4a on Google Play: PyTool USB Serial F, PyTool Modbus Free.
Implemented drivers are listed below:
- FTDI serial driver - done and tested with FT230X.
- CDC ACM serial driver - done and tested with MCP2200, BBC micro:bit V1(nRF51).
- CP210x serial driver - done and tested with CP2102.
- CH34x serial driver - done and tested with CH340.
- PL2303 serial driver - done and tested with PL2303.
To make quick prototype or to test and debug the script before building an App:
It works on Android 6.0+.
If there is any usb serial device, connect it to the Android phone/tablet through USB OTG cable (It's needed for Android USB host function).
Get Pydroid Apps from here, or get the latest versions on Google Play.
In Pydroid, go to Menu->Pip
and install usbserial4a
.
Or go to Menu->Terminal
and enter pip install usbserial4a
.
Save example.py
in the storage of the Android device.
Open example.py
and run it. When it runs for the first time, it might prompt you for permission to access the USB device. Accept the permission and run this script again, then it should send the data b'Hello world!'
as expected.
Go to Menu->Graphical program output
.
Scroll to the last line, it should list all the USB devices connected to the Android phone/tablet with vendor id, vendor name, product id and product name.
To build dedicated Apps with buildozer:
(These instructions are outdated and need update.)
It works on Android 4.0+.
In buildozer.spec
add termios.so
to the whitelist.
Include usb4a
and usbserial4a
in requirements.
Add intent-filter.xml
.
# (list) python-for-android whitelist
android.p4a_whitelist = lib-dynload/termios.so
# (list) Application requirements
# comma seperated e.g. requirements = sqlite3,kivy
requirements = kivy, pyjnius, usb4a, usbserial4a
# (str) XML file to include as an intent filters in <activity> tag
android.manifest.intent_filters = intent-filter.xml
Build the project for the first time and it will fail with an error as expected.
buildozer android debug
In the generated .buildozer
folder find a res
folder like this one:
.buildozer/android/platform/build/dists/YOU_PROJECT_NAME/src/main/res
Create a xml
folder in res
folder.
Add device_filter.xml
to this res/xml/
folder.
Find a manifest template file like this one:
.buildozer/android/platform/build/dists/YOUR_PROJECT_NAME/templates/AndroidManifest.tmpl.xml
Add <uses-feature android:name="android.hardware.usb.host" />
to this AndroidManifest.tmpl.xml
at a good position.
Build the project again and it should pass.