Skip to content

Latest commit

 

History

History
84 lines (70 loc) · 2.91 KB

CHANGELOG.md

File metadata and controls

84 lines (70 loc) · 2.91 KB
Raw

Changelog

[2.2.1] - Not released

Added

  • GUI -> Status: New OrthoHR aerial imagery layer, covering France.

Fixed

  • Rtkbase was deleting old archive when remaining space was lower than 5GB instead of 500MB

[2.2.0] - 2021-01-12

Added

  • New Rtcm serial service to send a rtcm stream on a serial output, like a radio module
  • RTKBase release number, receiver model, and antenna information are sent on RTCM stream (message 1008 and 1033 added)
  • GUI->Status: Button to copy realtime coordinates to the clipboard
  • GUI->Settings: You can edit the antenna info in the Main service options
  • GUI->Settings: Spinners and countdown added on reboot modal window
  • GUI->Settings: Auto refresh the webpage after a reboot (fixed time duration)
  • The archive_and_clean script delete oldest archives if there is less than 500MB available.
  • The install script check if there is enough space before starting

Changed

  • Upgrade to RTKLib v2.4.3-b34
  • Pystemd updated to 0.8.0
  • Pystemd is now installed from Pypi
  • Some python module updates
  • More dependencies are installed for aarch64 platform
  • The realtime base location calculation is now using dual-frequency ionosphere correction. You won't see the location anymore if you use a single frequency receiver.
  • Default value for archive rotation lowered to 60 days.

Fixed

  • Cleaning update modal box when closing it
  • writing absolute path to python3 in rtkbase_web unit file

Security

  • Cryptography module updated to 3.3.1

[2.1.1] - 2020-07-30

Fixed

  • rtcm services was sending data to the ntrip caster.

[2.1.0] - 2020-07-22

Added

  • GUI -> Status: Marker on the map with the fixed base's coordinates.
  • GUI -> Status: Optional Maptiler aerial image layer on the map (see 'Advanced' section in README.md)
  • GUI -> Settings: Receiver dependent options on Rtcm and Ntrip output
  • GUI -> Settings: Services diagnostic
  • GUI -> Logs: Option to convert a zipped ubx archive to Rinex (for the IGN "Calculs GNSS Réseau en ligne")
  • Miscellaneous: You can run install.sh from anywhere
  • Miscellaneous: Freeze python modules inside requirements

Changed

  • Gnss receiver (ZED-F9P): Disabling SBAS during configuration
  • Gnss receiver (U-Blox): During the first installation, if a U-Blox receiver is detected, -TADJ=1 will be added for Rtcm and Ntrip outputs. See #80
  • Gnss receiver: The config files extension is now .cfg

Fixed

  • install.sh: Check if logname return a correct value
  • install.sh: Add dialout group to user
  • various bugfixes

[2.0.2] - 2020-06-09

Added

  • Web interface
  • Satellite levels
  • Map
  • Setting configuration from the webpage
  • Download/Delete raw data
  • Automatic installation
  • Automatic setup for usb connected Ublox Zed-F9P
  • Multiple simultaneous streams (Raw/Rtcm/Ntrip)

[1.0.0] - 2019-12-19

Added

  • First official Release

[0.0.1] - 2019-03-02

Added

  • First beta release

Changed

Deprecated

Removed

Fixed

Security