diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h
index 23f7bdab3f08..2d85a9238728 100644
--- a/keyboards/0xcb/1337/config.h
+++ b/keyboards/0xcb/1337/config.h
@@ -18,8 +18,6 @@ along with this program. If not, see .
// clang-format off
-#define TAP_CODE_DELAY 10
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/0xcb/1337/info.json b/keyboards/0xcb/1337/info.json
index 87c0ab28b2f6..c72cd83f5d3e 100644
--- a/keyboards/0xcb/1337/info.json
+++ b/keyboards/0xcb/1337/info.json
@@ -18,6 +18,9 @@
{"pin_a": "F6", "pin_b": "F5"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"qmk_lufa_bootloader": {
"led": "B0"
},
diff --git a/keyboards/0xcb/static/config.h b/keyboards/0xcb/static/config.h
index 10b1f88216f1..179c84088bb3 100644
--- a/keyboards/0xcb/static/config.h
+++ b/keyboards/0xcb/static/config.h
@@ -16,8 +16,6 @@ along with this program. If not, see .
*/
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/0xcb/static/info.json b/keyboards/0xcb/static/info.json
index 7a678a01942a..97f5e53cadb9 100644
--- a/keyboards/0xcb/static/info.json
+++ b/keyboards/0xcb/static/info.json
@@ -18,6 +18,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega328p",
"bootloader": "usbasploader",
"layout_aliases": {
diff --git a/keyboards/7c8/framework/config.h b/keyboards/7c8/framework/config.h
index f6b4b30cf5eb..dce6855f68dc 100644
--- a/keyboards/7c8/framework/config.h
+++ b/keyboards/7c8/framework/config.h
@@ -16,7 +16,5 @@
#pragma once
-#define TAP_CODE_DELAY 16
-
#define LEADER_TIMEOUT 250
#define LEADER_PER_KEY_TIMING 150
diff --git a/keyboards/7c8/framework/info.json b/keyboards/7c8/framework/info.json
index 18c0289c9a37..331aa9f7977d 100644
--- a/keyboards/7c8/framework/info.json
+++ b/keyboards/7c8/framework/info.json
@@ -18,6 +18,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 16
+ },
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/adm42/config.h b/keyboards/adm42/config.h
index af23da4c6628..b5ba2eb94eaa 100644
--- a/keyboards/adm42/config.h
+++ b/keyboards/adm42/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 1
-
#if defined(CONSOLE_ENABLE)
#define DEBUG_MATRIX_SCAN_RATE
#endif
diff --git a/keyboards/adm42/info.json b/keyboards/adm42/info.json
index 14a74f993049..b890ad5e6b18 100644
--- a/keyboards/adm42/info.json
+++ b/keyboards/adm42/info.json
@@ -16,6 +16,9 @@
"driver": "WS2812",
"sat_steps": 24
},
+ "qmk": {
+ "tap_keycode_delay": 1
+ },
"matrix_pins": {
"cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"],
"rows": ["C7", "D5", "D3", "D2"]
diff --git a/keyboards/adpenrose/akemipad/config.h b/keyboards/adpenrose/akemipad/config.h
index 5756903c6645..230453c3a00a 100644
--- a/keyboards/adpenrose/akemipad/config.h
+++ b/keyboards/adpenrose/akemipad/config.h
@@ -3,8 +3,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Audio functionality */
#define AUDIO_PIN C6
#define AUDIO_CLICKY
diff --git a/keyboards/adpenrose/akemipad/info.json b/keyboards/adpenrose/akemipad/info.json
index fb70fb00a4f3..c1b6377e60ff 100644
--- a/keyboards/adpenrose/akemipad/info.json
+++ b/keyboards/adpenrose/akemipad/info.json
@@ -23,6 +23,9 @@
{"pin_a": "B1", "pin_b": "B3"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/adpenrose/kintsugi/config.h b/keyboards/adpenrose/kintsugi/config.h
index fcc098c5b6c4..e08849d93ee2 100644
--- a/keyboards/adpenrose/kintsugi/config.h
+++ b/keyboards/adpenrose/kintsugi/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Underglow options: */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/adpenrose/kintsugi/info.json b/keyboards/adpenrose/kintsugi/info.json
index aeecd8c6a4ff..6ae75a227eed 100644
--- a/keyboards/adpenrose/kintsugi/info.json
+++ b/keyboards/adpenrose/kintsugi/info.json
@@ -27,6 +27,9 @@
{"pin_a": "B7", "pin_b": "D5"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h
index 71b62c7a2e41..109ffbe418dc 100644
--- a/keyboards/adpenrose/obi/config.h
+++ b/keyboards/adpenrose/obi/config.h
@@ -3,8 +3,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Underglow options: */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/adpenrose/obi/info.json b/keyboards/adpenrose/obi/info.json
index cf258cff2b78..b67080af2cce 100644
--- a/keyboards/adpenrose/obi/info.json
+++ b/keyboards/adpenrose/obi/info.json
@@ -26,6 +26,9 @@
{"pin_a": "F1", "pin_b": "F0"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/ano/config.h b/keyboards/ano/config.h
index 296abfa02e63..fff04f05b3cf 100644
--- a/keyboards/ano/config.h
+++ b/keyboards/ano/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ano/info.json b/keyboards/ano/info.json
index 146e0cad7fc8..ce88965500b6 100644
--- a/keyboards/ano/info.json
+++ b/keyboards/ano/info.json
@@ -18,6 +18,9 @@
{"pin_a": "B12", "pin_b": "A14", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/aplyard/aplx6/rev2/config.h b/keyboards/aplyard/aplx6/rev2/config.h
deleted file mode 100644
index 3e1ce514506e..000000000000
--- a/keyboards/aplyard/aplx6/rev2/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
-Copyright 2020 April Aplyard
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-#define TAP_CODE_DELAY 50
diff --git a/keyboards/aplyard/aplx6/rev2/info.json b/keyboards/aplyard/aplx6/rev2/info.json
index 2dc54180eb5c..06e0296b684a 100644
--- a/keyboards/aplyard/aplx6/rev2/info.json
+++ b/keyboards/aplyard/aplx6/rev2/info.json
@@ -13,6 +13,9 @@
{"pin_a": "F5", "pin_b": "F4"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 50
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h
index 91a4eb0ae800..df0ebb0fdc43 100644
--- a/keyboards/bandominedoni/config.h
+++ b/keyboards/bandominedoni/config.h
@@ -137,5 +137,3 @@
// Initial velocity value (avoid using 127 since it is used as a special number in some sound sources.)
# define MIDI_INITIAL_VELOCITY 117
#endif // MIDI_ENABLE
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/bandominedoni/info.json b/keyboards/bandominedoni/info.json
index c4dfe46d74b4..9f069f771c66 100644
--- a/keyboards/bandominedoni/info.json
+++ b/keyboards/bandominedoni/info.json
@@ -26,6 +26,9 @@
}
}
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"ws2812": {
"pin": "D3"
},
diff --git a/keyboards/basketweave/config.h b/keyboards/basketweave/config.h
index 36054e7bb6fb..ebf85963191c 100644
--- a/keyboards/basketweave/config.h
+++ b/keyboards/basketweave/config.h
@@ -20,5 +20,3 @@
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/basketweave/info.json b/keyboards/basketweave/info.json
index 8f9be9b4062e..705ef675ba83 100644
--- a/keyboards/basketweave/info.json
+++ b/keyboards/basketweave/info.json
@@ -19,6 +19,9 @@
{"pin_a": "D7", "pin_b": "C0"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32a",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/boston/config.h b/keyboards/boston/config.h
index eae2fc455425..e4d02ffcb8e3 100644
--- a/keyboards/boston/config.h
+++ b/keyboards/boston/config.h
@@ -41,8 +41,6 @@
//The 3D-printed version of Boston uses APA106 LEDs, which are reversed
#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
-#define TAP_CODE_DELAY 15
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/boston/info.json b/keyboards/boston/info.json
index 5b30bdc00caf..f6539ef65862 100644
--- a/keyboards/boston/info.json
+++ b/keyboards/boston/info.json
@@ -18,6 +18,9 @@
{"pin_a": "C13", "pin_b": "F1", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 15
+ },
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/cannonkeys/balance/config.h b/keyboards/cannonkeys/balance/config.h
index f9c629dad823..0f2582901b1b 100644
--- a/keyboards/cannonkeys/balance/config.h
+++ b/keyboards/cannonkeys/balance/config.h
@@ -22,8 +22,6 @@ along with this program. If not, see .
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define TAP_CODE_DELAY 25
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
/*
diff --git a/keyboards/cannonkeys/balance/info.json b/keyboards/cannonkeys/balance/info.json
index 8be2cee0c58a..9565795169cb 100644
--- a/keyboards/cannonkeys/balance/info.json
+++ b/keyboards/cannonkeys/balance/info.json
@@ -18,6 +18,9 @@
{"pin_a": "B5", "pin_b": "B6", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 25
+ },
"indicators": {
"caps_lock": "B12",
"num_lock": "B14",
diff --git a/keyboards/custommk/ergostrafer/config.h b/keyboards/custommk/ergostrafer/config.h
index c5a0ec75b575..9622315defe9 100644
--- a/keyboards/custommk/ergostrafer/config.h
+++ b/keyboards/custommk/ergostrafer/config.h
@@ -16,8 +16,6 @@
#define SPI_MISO_PIN B4
#define SPI_MISO_PAL_MODE 5
-#define TAP_CODE_DELAY 10
-
// Audio configuration
#define AUDIO_PIN B8
#define AUDIO_PWM_DRIVER PWMD4
diff --git a/keyboards/custommk/ergostrafer/info.json b/keyboards/custommk/ergostrafer/info.json
index 66f1562fd986..590925065e18 100644
--- a/keyboards/custommk/ergostrafer/info.json
+++ b/keyboards/custommk/ergostrafer/info.json
@@ -79,5 +79,8 @@
{ "pin_a": "B12", "pin_b": "B14"},
{ "pin_a": "B15", "pin_b": "A15"}
]
+ },
+ "qmk": {
+ "tap_keycode_delay": 10
}
}
\ No newline at end of file
diff --git a/keyboards/custommk/evo70/config.h b/keyboards/custommk/evo70/config.h
index 3010e4989d41..00f78c6339dd 100644
--- a/keyboards/custommk/evo70/config.h
+++ b/keyboards/custommk/evo70/config.h
@@ -20,6 +20,4 @@
#define OLED_DISABLE_TIMEOUT
-#define TAP_CODE_DELAY 10
-
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 4
diff --git a/keyboards/custommk/evo70/info.json b/keyboards/custommk/evo70/info.json
index abd33c65ae16..ec6547346245 100644
--- a/keyboards/custommk/evo70/info.json
+++ b/keyboards/custommk/evo70/info.json
@@ -29,6 +29,9 @@
{"pin_a": "C7", "pin_b": "D5", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "B5",
"levels": 17,
diff --git a/keyboards/custommk/genesis/rev1/config.h b/keyboards/custommk/genesis/rev1/config.h
index 1d2f4a929c4d..892ac61ad3aa 100644
--- a/keyboards/custommk/genesis/rev1/config.h
+++ b/keyboards/custommk/genesis/rev1/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/custommk/genesis/rev1/info.json b/keyboards/custommk/genesis/rev1/info.json
index a5e567b80aff..8404cdbacace 100644
--- a/keyboards/custommk/genesis/rev1/info.json
+++ b/keyboards/custommk/genesis/rev1/info.json
@@ -28,6 +28,9 @@
{"pin_a": "D2", "pin_b": "D1", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"layouts": {
diff --git a/keyboards/custommk/genesis/rev2/config.h b/keyboards/custommk/genesis/rev2/config.h
index 96eb4b15aa42..6427c5de2be5 100644
--- a/keyboards/custommk/genesis/rev2/config.h
+++ b/keyboards/custommk/genesis/rev2/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/custommk/genesis/rev2/info.json b/keyboards/custommk/genesis/rev2/info.json
index aa7f530c9095..6b7d1c6de37f 100644
--- a/keyboards/custommk/genesis/rev2/info.json
+++ b/keyboards/custommk/genesis/rev2/info.json
@@ -28,6 +28,9 @@
{"pin_a": "D2", "pin_b": "D1", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"layouts": {
diff --git a/keyboards/doodboard/duckboard/config.h b/keyboards/doodboard/duckboard/config.h
deleted file mode 100644
index e16c8b7f5a8e..000000000000
--- a/keyboards/doodboard/duckboard/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2020-2021 doodboard
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-/* media key slowdown for windows */
-#define TAP_CODE_DELAY 20
diff --git a/keyboards/doodboard/duckboard/info.json b/keyboards/doodboard/duckboard/info.json
index 2b1f08ebb3c8..3d4577011213 100644
--- a/keyboards/doodboard/duckboard/info.json
+++ b/keyboards/doodboard/duckboard/info.json
@@ -18,6 +18,9 @@
{"pin_a": "F5", "pin_b": "F6", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 20
+ },
"rgblight": {
"led_count": 8
},
diff --git a/keyboards/doodboard/duckboard_r2/config.h b/keyboards/doodboard/duckboard_r2/config.h
deleted file mode 100644
index e16c8b7f5a8e..000000000000
--- a/keyboards/doodboard/duckboard_r2/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2020-2021 doodboard
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-/* media key slowdown for windows */
-#define TAP_CODE_DELAY 20
diff --git a/keyboards/doodboard/duckboard_r2/info.json b/keyboards/doodboard/duckboard_r2/info.json
index 1aff0eccd382..4c47e9a70ea4 100644
--- a/keyboards/doodboard/duckboard_r2/info.json
+++ b/keyboards/doodboard/duckboard_r2/info.json
@@ -18,6 +18,9 @@
{"pin_a": "F6", "pin_b": "F5", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 20
+ },
"rgblight": {
"led_count": 8
},
diff --git a/keyboards/draytronics/daisy/config.h b/keyboards/draytronics/daisy/config.h
index 8d6b9ba01e46..398395b40ae3 100644
--- a/keyboards/draytronics/daisy/config.h
+++ b/keyboards/draytronics/daisy/config.h
@@ -18,8 +18,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/draytronics/daisy/info.json b/keyboards/draytronics/daisy/info.json
index e8d00d727c10..ad5244159e7d 100644
--- a/keyboards/draytronics/daisy/info.json
+++ b/keyboards/draytronics/daisy/info.json
@@ -19,6 +19,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
diff --git a/keyboards/dyz/dyz40/config.h b/keyboards/dyz/dyz40/config.h
index 87e057133dcb..7e7ca8b69490 100644
--- a/keyboards/dyz/dyz40/config.h
+++ b/keyboards/dyz/dyz40/config.h
@@ -17,6 +17,4 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/dyz/dyz40/info.json b/keyboards/dyz/dyz40/info.json
index bb54647fedc3..fdd14a7c428b 100644
--- a/keyboards/dyz/dyz40/info.json
+++ b/keyboards/dyz/dyz40/info.json
@@ -13,6 +13,9 @@
{"pin_a": "D1", "pin_b": "D0"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"led_count": 13,
"hue_steps": 10,
diff --git a/keyboards/dyz/dyz60/config.h b/keyboards/dyz/dyz60/config.h
index 87e057133dcb..7e7ca8b69490 100644
--- a/keyboards/dyz/dyz60/config.h
+++ b/keyboards/dyz/dyz60/config.h
@@ -17,6 +17,4 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/dyz/dyz60/info.json b/keyboards/dyz/dyz60/info.json
index 05e0a2dae718..28300d791437 100644
--- a/keyboards/dyz/dyz60/info.json
+++ b/keyboards/dyz/dyz60/info.json
@@ -39,6 +39,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"indicators": {
"caps_lock": "F1"
},
diff --git a/keyboards/dyz/dyz60_hs/config.h b/keyboards/dyz/dyz60_hs/config.h
index 4dd98dcbdfe9..7e7ca8b69490 100644
--- a/keyboards/dyz/dyz60_hs/config.h
+++ b/keyboards/dyz/dyz60_hs/config.h
@@ -17,5 +17,4 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/dyz/dyz60_hs/info.json b/keyboards/dyz/dyz60_hs/info.json
index c23b0dca6a54..598f236980b6 100644
--- a/keyboards/dyz/dyz60_hs/info.json
+++ b/keyboards/dyz/dyz60_hs/info.json
@@ -37,6 +37,9 @@
"pid": "0x001A",
"device_version": "0.0.1"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_tsangan_hhkb", "60_iso", "60_iso_split_bs_rshift"],
diff --git a/keyboards/dyz/dyz_tkl/config.h b/keyboards/dyz/dyz_tkl/config.h
index 87e057133dcb..7e7ca8b69490 100644
--- a/keyboards/dyz/dyz_tkl/config.h
+++ b/keyboards/dyz/dyz_tkl/config.h
@@ -17,6 +17,4 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/dyz/dyz_tkl/info.json b/keyboards/dyz/dyz_tkl/info.json
index c44e9b585cd8..298611a742f2 100644
--- a/keyboards/dyz/dyz_tkl/info.json
+++ b/keyboards/dyz/dyz_tkl/info.json
@@ -34,6 +34,9 @@
"indicators": {
"caps_lock": "D2"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["tkl_f13_ansi", "tkl_f13_iso"],
diff --git a/keyboards/dyz/selka40/config.h b/keyboards/dyz/selka40/config.h
index 87e057133dcb..7e7ca8b69490 100644
--- a/keyboards/dyz/selka40/config.h
+++ b/keyboards/dyz/selka40/config.h
@@ -17,6 +17,4 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/dyz/selka40/info.json b/keyboards/dyz/selka40/info.json
index 8fe32e5071c6..95ac00a88318 100644
--- a/keyboards/dyz/selka40/info.json
+++ b/keyboards/dyz/selka40/info.json
@@ -39,6 +39,9 @@
{"pin_a": "D6", "pin_b": "D7"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"indicators": {
"caps_lock": "B1",
"num_lock": "B3",
diff --git a/keyboards/ebastler/isometria_75/rev1/config.h b/keyboards/ebastler/isometria_75/rev1/config.h
index c8ecae7fc65a..29a2ac527d1c 100644
--- a/keyboards/ebastler/isometria_75/rev1/config.h
+++ b/keyboards/ebastler/isometria_75/rev1/config.h
@@ -33,7 +33,5 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define TAP_CODE_DELAY 10
-
/* ADC - will be used for battery monitoring once BT support is added */
/* #define ADC_PIN B0 */
diff --git a/keyboards/ebastler/isometria_75/rev1/info.json b/keyboards/ebastler/isometria_75/rev1/info.json
index aef759e29a22..4c3d6a626e09 100644
--- a/keyboards/ebastler/isometria_75/rev1/info.json
+++ b/keyboards/ebastler/isometria_75/rev1/info.json
@@ -26,6 +26,9 @@
{"pin_a": "C15", "pin_b": "C14", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "A9",
"levels": 5,
diff --git a/keyboards/fungo/rev1/config.h b/keyboards/fungo/rev1/config.h
index 93ad87fdb2e7..349905fa0b08 100644
--- a/keyboards/fungo/rev1/config.h
+++ b/keyboards/fungo/rev1/config.h
@@ -24,7 +24,6 @@
/*************************************/
#define MATRIX_IO_DELAY 15 // default 30
-#define TAP_CODE_DELAY 50 // default 0, disabled
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/fungo/rev1/info.json b/keyboards/fungo/rev1/info.json
index 2cd099e3d580..6451d88bee86 100644
--- a/keyboards/fungo/rev1/info.json
+++ b/keyboards/fungo/rev1/info.json
@@ -22,6 +22,9 @@
}
}
},
+ "qmk": {
+ "tap_keycode_delay": 50
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"debounce": 3,
diff --git a/keyboards/geekboards/macropad_v2/config.h b/keyboards/geekboards/macropad_v2/config.h
index 02f5a8a966ca..47f9064e451f 100644
--- a/keyboards/geekboards/macropad_v2/config.h
+++ b/keyboards/geekboards/macropad_v2/config.h
@@ -85,5 +85,3 @@
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define WAIT_FOR_USB
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/geekboards/macropad_v2/info.json b/keyboards/geekboards/macropad_v2/info.json
index 504238b21c74..52db89c06ae9 100644
--- a/keyboards/geekboards/macropad_v2/info.json
+++ b/keyboards/geekboards/macropad_v2/info.json
@@ -8,6 +8,9 @@
"pid": "0xA372",
"device_version": "0.0.2"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"ws2812": {
"pin": "A7",
"driver": "pwm"
diff --git a/keyboards/giabalanai/config.h b/keyboards/giabalanai/config.h
index bc6fd53b1fb5..10e34a4cbbed 100644
--- a/keyboards/giabalanai/config.h
+++ b/keyboards/giabalanai/config.h
@@ -168,8 +168,6 @@ along with this program. If not, see .
# define MIDI_INITIAL_VELOCITY 117
#endif // MIDI_ENABLE
-#define TAP_CODE_DELAY 10
-
/* 2021/01/22 added to shrink firmware size */
// NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods...
// #define NO_ACTION_TAPPING
diff --git a/keyboards/giabalanai/info.json b/keyboards/giabalanai/info.json
index 388d0a1ad2ac..44482a2c0c97 100644
--- a/keyboards/giabalanai/info.json
+++ b/keyboards/giabalanai/info.json
@@ -55,6 +55,9 @@
}
}
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/gmmk/gmmk2/p65/ansi/info.json b/keyboards/gmmk/gmmk2/p65/ansi/info.json
index c22fe89f589d..f4a9b92312bc 100644
--- a/keyboards/gmmk/gmmk2/p65/ansi/info.json
+++ b/keyboards/gmmk/gmmk2/p65/ansi/info.json
@@ -8,6 +8,9 @@
"pid": "0x5045",
"device_version": "0.0.1"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgb_matrix": {
"driver": "AW20216"
},
diff --git a/keyboards/gmmk/gmmk2/p65/config.h b/keyboards/gmmk/gmmk2/p65/config.h
index 64febeb948aa..3c6a2fd906ed 100644
--- a/keyboards/gmmk/gmmk2/p65/config.h
+++ b/keyboards/gmmk/gmmk2/p65/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/gmmk/gmmk2/p65/iso/info.json b/keyboards/gmmk/gmmk2/p65/iso/info.json
index de078864cea4..c036ffa30605 100644
--- a/keyboards/gmmk/gmmk2/p65/iso/info.json
+++ b/keyboards/gmmk/gmmk2/p65/iso/info.json
@@ -8,6 +8,9 @@
"pid": "0x504A",
"device_version": "0.0.1"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgb_matrix": {
"driver": "AW20216"
},
diff --git a/keyboards/gmmk/gmmk2/p96/ansi/info.json b/keyboards/gmmk/gmmk2/p96/ansi/info.json
index 482e52f5044a..3b5caf5d54e5 100644
--- a/keyboards/gmmk/gmmk2/p96/ansi/info.json
+++ b/keyboards/gmmk/gmmk2/p96/ansi/info.json
@@ -8,6 +8,9 @@
"pid": "0x504B",
"device_version": "0.0.1"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgb_matrix": {
"driver": "AW20216"
},
diff --git a/keyboards/gmmk/gmmk2/p96/config.h b/keyboards/gmmk/gmmk2/p96/config.h
index 16aae9b33037..e3b5cdcfa1d6 100644
--- a/keyboards/gmmk/gmmk2/p96/config.h
+++ b/keyboards/gmmk/gmmk2/p96/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/gmmk/gmmk2/p96/iso/info.json b/keyboards/gmmk/gmmk2/p96/iso/info.json
index de9eb07edcf8..dd747478d964 100644
--- a/keyboards/gmmk/gmmk2/p96/iso/info.json
+++ b/keyboards/gmmk/gmmk2/p96/iso/info.json
@@ -8,6 +8,9 @@
"pid": "0x505A",
"device_version": "0.0.1"
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgb_matrix": {
"driver": "AW20216"
},
diff --git a/keyboards/gmmk/pro/config.h b/keyboards/gmmk/pro/config.h
index 10db82def355..069823663eeb 100644
--- a/keyboards/gmmk/pro/config.h
+++ b/keyboards/gmmk/pro/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/gmmk/pro/rev1/ansi/info.json b/keyboards/gmmk/pro/rev1/ansi/info.json
index 7a1532424bde..80cab4dfe339 100644
--- a/keyboards/gmmk/pro/rev1/ansi/info.json
+++ b/keyboards/gmmk/pro/rev1/ansi/info.json
@@ -21,6 +21,9 @@
{"pin_a": "C15", "pin_b": "C14"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"bootmagic": {
"matrix": [1, 3]
},
diff --git a/keyboards/gmmk/pro/rev1/iso/info.json b/keyboards/gmmk/pro/rev1/iso/info.json
index 7b78ca57163a..b1c17fe80564 100644
--- a/keyboards/gmmk/pro/rev1/iso/info.json
+++ b/keyboards/gmmk/pro/rev1/iso/info.json
@@ -21,6 +21,9 @@
{"pin_a": "C15", "pin_b": "C14"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"bootmagic": {
"matrix": [1, 3]
},
diff --git a/keyboards/gmmk/pro/rev2/ansi/info.json b/keyboards/gmmk/pro/rev2/ansi/info.json
index ff693e35739b..ae9086af4376 100644
--- a/keyboards/gmmk/pro/rev2/ansi/info.json
+++ b/keyboards/gmmk/pro/rev2/ansi/info.json
@@ -21,6 +21,9 @@
{"pin_a": "C15", "pin_b": "C14"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"bootmagic": {
"matrix": [1, 3]
},
diff --git a/keyboards/gmmk/pro/rev2/iso/info.json b/keyboards/gmmk/pro/rev2/iso/info.json
index 972551ec4138..b1b85b7af580 100644
--- a/keyboards/gmmk/pro/rev2/iso/info.json
+++ b/keyboards/gmmk/pro/rev2/iso/info.json
@@ -21,6 +21,9 @@
{"pin_a": "C15", "pin_b": "C14"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"bootmagic": {
"matrix": [1, 3]
},
diff --git a/keyboards/halokeys/elemental75/config.h b/keyboards/halokeys/elemental75/config.h
index 66bdf7c5adb3..0f093b6455a7 100644
--- a/keyboards/halokeys/elemental75/config.h
+++ b/keyboards/halokeys/elemental75/config.h
@@ -15,8 +15,6 @@
*/
#pragma once
-#define TAP_CODE_DELAY 10 // tap_code function delay for register and unregister
-
/* animations enabled */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/halokeys/elemental75/info.json b/keyboards/halokeys/elemental75/info.json
index deea8b247943..56feac1e6bdd 100644
--- a/keyboards/halokeys/elemental75/info.json
+++ b/keyboards/halokeys/elemental75/info.json
@@ -21,6 +21,9 @@
"tapping": {
"term": 300
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"ws2812": {
"pin": "A10"
},
diff --git a/keyboards/handwired/d48/config.h b/keyboards/handwired/d48/config.h
index 8e3cd4373997..9f06a2501ab5 100644
--- a/keyboards/handwired/d48/config.h
+++ b/keyboards/handwired/d48/config.h
@@ -31,9 +31,6 @@
#define OLED_TIMEOUT 0
// #define OLED_SCROLL_TIMEOUT 1000
-/* Taps (encoder tap_code) */
-#define TAP_CODE_DELAY 10
-
/* I2C */
//#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
//#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN)
diff --git a/keyboards/handwired/d48/info.json b/keyboards/handwired/d48/info.json
index 8e2bda7218cb..f56cb99e205f 100644
--- a/keyboards/handwired/d48/info.json
+++ b/keyboards/handwired/d48/info.json
@@ -27,6 +27,9 @@
{"pin_a": "A0", "pin_b": "A1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/dactylmacropad/config.h b/keyboards/handwired/dactylmacropad/config.h
deleted file mode 100644
index a2a5455ab148..000000000000
--- a/keyboards/handwired/dactylmacropad/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-// Copyright 2022 bwprobably
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-#define TAP_CODE_DELAY 100
diff --git a/keyboards/handwired/dactylmacropad/info.json b/keyboards/handwired/dactylmacropad/info.json
index 6744d4b7015d..5d40a240a9fd 100644
--- a/keyboards/handwired/dactylmacropad/info.json
+++ b/keyboards/handwired/dactylmacropad/info.json
@@ -28,6 +28,9 @@
{"pin_a": "D1", "pin_b": "D0"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 100
+ },
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h
deleted file mode 100644
index 2e6498ab5d81..000000000000
--- a/keyboards/handwired/daishi/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
-Copyright 2019 Crokto
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-/* Set delay for tap_code on rotary encoder */
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/handwired/daishi/info.json b/keyboards/handwired/daishi/info.json
index 37d80633a79f..6b6508eb83b2 100644
--- a/keyboards/handwired/daishi/info.json
+++ b/keyboards/handwired/daishi/info.json
@@ -18,6 +18,9 @@
{"pin_a": "F1", "pin_b": "F0", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "at90usb1286",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h
index 83c78b163420..632465bba71f 100644
--- a/keyboards/handwired/mutepad/config.h
+++ b/keyboards/handwired/mutepad/config.h
@@ -3,8 +3,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json
index e8df528eff32..5adb2505fbc8 100644
--- a/keyboards/handwired/mutepad/info.json
+++ b/keyboards/handwired/mutepad/info.json
@@ -19,6 +19,9 @@
{"pin_a": "F4", "pin_b": "F5", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/handwired/terminus_mini/info.json b/keyboards/handwired/terminus_mini/info.json
index 6ceaa8e16151..5593be8bb7a0 100644
--- a/keyboards/handwired/terminus_mini/info.json
+++ b/keyboards/handwired/terminus_mini/info.json
@@ -9,7 +9,8 @@
"device_version": "0.0.1"
},
"tapping": {
- "term": 150
+ "term": 150,
+ "toggle": 1
},
"matrix_pins": {
"cols": ["B0", "D0", "D5", "B6", "D4", "C7", "F7", "F6", "F5", "F4", "F1", "F0"],
@@ -18,9 +19,6 @@
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay",
- "tapping": {
- "toggle": 1
- },
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/hfdkb/ac001/config.h b/keyboards/hfdkb/ac001/config.h
index 899a134762ca..6c0c2a2cf613 100644
--- a/keyboards/hfdkb/ac001/config.h
+++ b/keyboards/hfdkb/ac001/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 5
-
/* ws2812 RGB LED */
#define RGB_MATRIX_LED_COUNT 5
diff --git a/keyboards/hfdkb/ac001/info.json b/keyboards/hfdkb/ac001/info.json
index 2efee90deba8..229bee6ff454 100644
--- a/keyboards/hfdkb/ac001/info.json
+++ b/keyboards/hfdkb/ac001/info.json
@@ -20,6 +20,9 @@
"ws2812": {
"pin": "A1"
},
+ "qmk": {
+ "tap_keycode_delay": 5
+ },
"processor": "WB32FQ95",
"bootloader": "wb32-dfu",
"layouts": {
diff --git a/keyboards/hub20/config.h b/keyboards/hub20/config.h
index 8dc3bd501cf4..a72b1389ad61 100644
--- a/keyboards/hub20/config.h
+++ b/keyboards/hub20/config.h
@@ -72,9 +72,6 @@ along with this program. If not, see .
// #define ENABLE_RGB_MATRIX_SOLID_SPLASH
// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-/* Slow down key press speed to ensure computer picks it up */
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/hub20/info.json b/keyboards/hub20/info.json
index 79a545edd6cb..3b9cec99c288 100644
--- a/keyboards/hub20/info.json
+++ b/keyboards/hub20/info.json
@@ -22,6 +22,9 @@
{"pin_a": "A8", "pin_b": "A9"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"led_count": 27
},
diff --git a/keyboards/inland/kb83/config.h b/keyboards/inland/kb83/config.h
index a4660c93be8e..d1e7d11acc61 100644
--- a/keyboards/inland/kb83/config.h
+++ b/keyboards/inland/kb83/config.h
@@ -19,9 +19,6 @@
#define RGB_TRIGGER_ON_KEYDOWN
-/* encoder resolution */
-#define TAP_CODE_DELAY 15
-
/* DIP switch */
#define DIP_SWITCH_PINS \
{ A9 }
diff --git a/keyboards/inland/kb83/info.json b/keyboards/inland/kb83/info.json
index b31fd86f1f88..ecd274cef785 100644
--- a/keyboards/inland/kb83/info.json
+++ b/keyboards/inland/kb83/info.json
@@ -23,6 +23,9 @@
{"pin_a": "B14", "pin_b": "B13", "resolution": 4}
]
},
+ "qmk": {
+ "tap_keycode_delay": 15
+ },
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/kapcave/arya/config.h b/keyboards/kapcave/arya/config.h
index 282b98a9781e..942207631595 100644
--- a/keyboards/kapcave/arya/config.h
+++ b/keyboards/kapcave/arya/config.h
@@ -22,8 +22,6 @@ along with this program. If not, see .
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define TAP_CODE_DELAY 25
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
/*
diff --git a/keyboards/kapcave/arya/info.json b/keyboards/kapcave/arya/info.json
index 0125b834fb53..34246609e53b 100644
--- a/keyboards/kapcave/arya/info.json
+++ b/keyboards/kapcave/arya/info.json
@@ -20,6 +20,9 @@
{"pin_a": "C15", "pin_b": "C14", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 25
+ },
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"community_layouts": ["alice_split_bs"],
diff --git a/keyboards/keebio/bdn9/rev2/config.h b/keyboards/keebio/bdn9/rev2/config.h
index a8bfa41d69cf..ae46e0348fd6 100644
--- a/keyboards/keebio/bdn9/rev2/config.h
+++ b/keyboards/keebio/bdn9/rev2/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/keebio/bdn9/rev2/info.json b/keyboards/keebio/bdn9/rev2/info.json
index 43e8dedbf770..c7dd5d6bcd54 100644
--- a/keyboards/keebio/bdn9/rev2/info.json
+++ b/keyboards/keebio/bdn9/rev2/info.json
@@ -23,6 +23,9 @@
{"pin_a": "A10", "pin_b": "A9"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"matrix_pins": {
diff --git a/keyboards/keebio/dsp40/rev1/config.h b/keyboards/keebio/dsp40/rev1/config.h
index 37dd9473641b..b832d5ee662d 100644
--- a/keyboards/keebio/dsp40/rev1/config.h
+++ b/keyboards/keebio/dsp40/rev1/config.h
@@ -16,8 +16,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/keebio/dsp40/rev1/info.json b/keyboards/keebio/dsp40/rev1/info.json
index 353c61f73303..7a2ad6cf7e6d 100644
--- a/keyboards/keebio/dsp40/rev1/info.json
+++ b/keyboards/keebio/dsp40/rev1/info.json
@@ -18,6 +18,9 @@
{"pin_a": "A1", "pin_b": "A2"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "A6",
"levels": 7
diff --git a/keyboards/keycapsss/plaid_pad/config.h b/keyboards/keycapsss/plaid_pad/config.h
deleted file mode 100644
index 984323f63c9e..000000000000
--- a/keyboards/keycapsss/plaid_pad/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2020 Ben Roesner (keycapsss.com)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-// Fix for volume controll with encoder (steadily in/decrease)
-#define TAP_CODE_DELAY 60
diff --git a/keyboards/keycapsss/plaid_pad/info.json b/keyboards/keycapsss/plaid_pad/info.json
index 9fe02448d02a..c66bd05f1bc6 100644
--- a/keyboards/keycapsss/plaid_pad/info.json
+++ b/keyboards/keycapsss/plaid_pad/info.json
@@ -7,6 +7,9 @@
"pid": "0x5050",
"max_power": 100
},
+ "qmk": {
+ "tap_keycode_delay": 60
+ },
"matrix_pins": {
"cols": ["B0", "D7", "D6", "D5"],
"rows": ["C0", "C1", "C2", "C3"]
diff --git a/keyboards/kiwikey/borderland/config.h b/keyboards/kiwikey/borderland/config.h
index 1d4bb6fef5ef..c930dd1f0943 100644
--- a/keyboards/kiwikey/borderland/config.h
+++ b/keyboards/kiwikey/borderland/config.h
@@ -3,8 +3,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/kiwikey/borderland/info.json b/keyboards/kiwikey/borderland/info.json
index 3133de3caeff..cf8b655ba233 100644
--- a/keyboards/kiwikey/borderland/info.json
+++ b/keyboards/kiwikey/borderland/info.json
@@ -18,6 +18,9 @@
{"pin_a": "F5", "pin_b": "F6"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
diff --git a/keyboards/lime/rev1/config.h b/keyboards/lime/rev1/config.h
index 3915f72c29e8..ef4f99076da2 100644
--- a/keyboards/lime/rev1/config.h
+++ b/keyboards/lime/rev1/config.h
@@ -23,8 +23,6 @@
# define JOYSTICK_AXIS_RESOLUTION 8
#endif
-#define TAP_CODE_DELAY 10
-
#define SPLIT_USB_DETECT
#ifdef WPM_ENABLE
diff --git a/keyboards/lime/rev1/info.json b/keyboards/lime/rev1/info.json
index a3da36665624..13caf33841e7 100644
--- a/keyboards/lime/rev1/info.json
+++ b/keyboards/lime/rev1/info.json
@@ -31,6 +31,9 @@
"tapping": {
"term": 100
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/linworks/whale75/config.h b/keyboards/linworks/whale75/config.h
index 133b2a973ba3..d12d33bdfd38 100644
--- a/keyboards/linworks/whale75/config.h
+++ b/keyboards/linworks/whale75/config.h
@@ -30,5 +30,3 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/linworks/whale75/info.json b/keyboards/linworks/whale75/info.json
index 3385f5371d80..d85f17455fbf 100644
--- a/keyboards/linworks/whale75/info.json
+++ b/keyboards/linworks/whale75/info.json
@@ -26,6 +26,9 @@
{"pin_a": "A15", "pin_b": "A14", "resolution": 2}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "A10",
"levels": 5,
diff --git a/keyboards/makrosu/config.h b/keyboards/makrosu/config.h
index 64f4553f9032..2977cd9d40a8 100644
--- a/keyboards/makrosu/config.h
+++ b/keyboards/makrosu/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/makrosu/info.json b/keyboards/makrosu/info.json
index 96eaf9fad620..ad6acdb100ad 100644
--- a/keyboards/makrosu/info.json
+++ b/keyboards/makrosu/info.json
@@ -18,6 +18,9 @@
{"pin_a": "E6", "pin_b": "D1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"bootmagic": {
"matrix": [0, 5]
},
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
index 957e845a350a..088c29a04800 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
@@ -82,5 +82,3 @@
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#define RGB_MATRIX_DISABLE_KEYCODES
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json
index 82a5d86dc210..c7e662c0088c 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json
@@ -16,6 +16,9 @@
{"pin_a": "A4", "pin_b": "A3"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
index 44c5e2dad02c..3c514668d154 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -104,5 +104,3 @@ along with this program. If not, see .
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
#endif
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json
index 2b3cad5b0b39..d745503c2799 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json
@@ -16,6 +16,9 @@
{"pin_a": "B12", "pin_b": "B13"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "STM32F103",
"bootloader": "stm32duino",
"indicators": {
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h
deleted file mode 100644
index 254d20403810..000000000000
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#pragma once
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json
index a5ebef5b8750..46907dc7a9d6 100644
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json
@@ -9,6 +9,9 @@
{"pin_a": "B7", "pin_b": "B6"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "STM32F303",
"board": "QMK_PROTON_C",
"bootloader": "stm32-dfu",
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h
deleted file mode 100644
index 7905be189159..000000000000
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
-Copyright 2021 Mechlovin' Studio
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-#pragma once
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json
index b6ee0c5b6700..f0d10942adc8 100644
--- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json
@@ -9,6 +9,9 @@
{"pin_a": "B7", "pin_b": "B6"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"layout_aliases": {
"LAYOUT_all": "LAYOUT_alice_split_bs"
},
diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h
index b4c3ab93e827..f1fda9adfcba 100644
--- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h
+++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h
@@ -41,5 +41,3 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json
index 61904c585f2d..d7c51465ff92 100644
--- a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json
+++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json
@@ -10,6 +10,9 @@
{"pin_a": "C7", "pin_b": "C6"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "B5",
"breathing": true
diff --git a/keyboards/mechlovin/foundation/config.h b/keyboards/mechlovin/foundation/config.h
index 9cff32c00e5c..701ca1705fdb 100644
--- a/keyboards/mechlovin/foundation/config.h
+++ b/keyboards/mechlovin/foundation/config.h
@@ -27,5 +27,3 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mechlovin/foundation/info.json b/keyboards/mechlovin/foundation/info.json
index b6ac62a40b60..54464510c868 100644
--- a/keyboards/mechlovin/foundation/info.json
+++ b/keyboards/mechlovin/foundation/info.json
@@ -18,6 +18,9 @@
{"pin_a": "C13", "pin_b": "C14"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"indicators": {
"caps_lock": "A1",
"on_state": 0
diff --git a/keyboards/mechlovin/hex6c/config.h b/keyboards/mechlovin/hex6c/config.h
index a22137acf7b8..48bf7175814d 100644
--- a/keyboards/mechlovin/hex6c/config.h
+++ b/keyboards/mechlovin/hex6c/config.h
@@ -20,7 +20,5 @@ along with this program. If not, see .
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 3
-#define TAP_CODE_DELAY 10
-
#define WEAR_LEVELING_BACKING_SIZE 4096
#define WEAR_LEVELING_LOGICAL_SIZE 2048
diff --git a/keyboards/mechlovin/hex6c/info.json b/keyboards/mechlovin/hex6c/info.json
index 4ae471cb4748..dfeb91e0bac6 100644
--- a/keyboards/mechlovin/hex6c/info.json
+++ b/keyboards/mechlovin/hex6c/info.json
@@ -18,6 +18,9 @@
{"pin_a": "A15", "pin_b": "A2"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "B0",
"breathing": true
diff --git a/keyboards/mechlovin/zed65/no_backlight/retro66/config.h b/keyboards/mechlovin/zed65/no_backlight/retro66/config.h
deleted file mode 100644
index 6786e3b953ca..000000000000
--- a/keyboards/mechlovin/zed65/no_backlight/retro66/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
-Copyright 2022 Mechlovin'
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mechlovin/zed65/no_backlight/retro66/info.json b/keyboards/mechlovin/zed65/no_backlight/retro66/info.json
index 791909056380..0709014f76b7 100644
--- a/keyboards/mechlovin/zed65/no_backlight/retro66/info.json
+++ b/keyboards/mechlovin/zed65/no_backlight/retro66/info.json
@@ -19,6 +19,9 @@
{"pin_a": "B6", "pin_b": "B9"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"indicators": {
"caps_lock": "C14"
},
diff --git a/keyboards/mechwild/mercutio/config.h b/keyboards/mechwild/mercutio/config.h
index f9f13d9ac0da..7a7d9cfd15bf 100755
--- a/keyboards/mechwild/mercutio/config.h
+++ b/keyboards/mechwild/mercutio/config.h
@@ -17,8 +17,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Define custom font */
#define OLED_FONT_H "lib/mercutiofont.c"
diff --git a/keyboards/mechwild/mercutio/info.json b/keyboards/mechwild/mercutio/info.json
index f4b1fa141a6e..796d22e36398 100644
--- a/keyboards/mechwild/mercutio/info.json
+++ b/keyboards/mechwild/mercutio/info.json
@@ -18,6 +18,9 @@
{"pin_a": "B4", "pin_b": "B5"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/mechwild/mokulua/mirrored/config.h b/keyboards/mechwild/mokulua/mirrored/config.h
index 3f88b82337a4..3e746d86158e 100644
--- a/keyboards/mechwild/mokulua/mirrored/config.h
+++ b/keyboards/mechwild/mokulua/mirrored/config.h
@@ -3,8 +3,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
#define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c"
#define MASTER_LEFT
diff --git a/keyboards/mechwild/mokulua/mirrored/info.json b/keyboards/mechwild/mokulua/mirrored/info.json
index 93784043dc75..efdab99de75c 100644
--- a/keyboards/mechwild/mokulua/mirrored/info.json
+++ b/keyboards/mechwild/mokulua/mirrored/info.json
@@ -18,6 +18,9 @@
{"pin_a": "D2", "pin_b": "B2"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"split": {
"soft_serial_pin": "D3"
},
diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h
index 8925688b0716..681c235764aa 100644
--- a/keyboards/mechwild/mokulua/standard/config.h
+++ b/keyboards/mechwild/mokulua/standard/config.h
@@ -3,8 +3,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
#define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c"
#define MASTER_LEFT
diff --git a/keyboards/mechwild/mokulua/standard/info.json b/keyboards/mechwild/mokulua/standard/info.json
index d463af33f6e3..d634df9ee793 100644
--- a/keyboards/mechwild/mokulua/standard/info.json
+++ b/keyboards/mechwild/mokulua/standard/info.json
@@ -18,6 +18,9 @@
{"pin_a": "D2", "pin_b": "B2"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"split": {
"soft_serial_pin": "D3"
},
diff --git a/keyboards/mechwild/murphpad/config.h b/keyboards/mechwild/murphpad/config.h
index c16e648b4b2f..3f3be7d48484 100644
--- a/keyboards/mechwild/murphpad/config.h
+++ b/keyboards/mechwild/murphpad/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
#define OLED_FONT_H "keyboards/mechwild/murphpad/lib/murphpadfont.c"
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/mechwild/murphpad/info.json b/keyboards/mechwild/murphpad/info.json
index 9abeb8ba0f62..307cb5e13e6a 100644
--- a/keyboards/mechwild/murphpad/info.json
+++ b/keyboards/mechwild/murphpad/info.json
@@ -19,6 +19,9 @@
{"pin_a": "D2", "pin_b": "D3"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"bootmagic": {
"matrix": [0, 1]
},
diff --git a/keyboards/mechwild/obe/config.h b/keyboards/mechwild/obe/config.h
index 1f204a12db88..98bad4a6157b 100644
--- a/keyboards/mechwild/obe/config.h
+++ b/keyboards/mechwild/obe/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
/* RGB settings, uncomment this define to enable RGB */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/mechwild/obe/info.json b/keyboards/mechwild/obe/info.json
index 644fd9a2772c..dbf7e6ddafd3 100644
--- a/keyboards/mechwild/obe/info.json
+++ b/keyboards/mechwild/obe/info.json
@@ -18,6 +18,9 @@
{"pin_a": "B5", "pin_b": "B4"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"indicators": {
"caps_lock": "B9",
"num_lock": "B8"
diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h
index d48c42628e74..1ca7ed1204ef 100644
--- a/keyboards/mechwild/puckbuddy/config.h
+++ b/keyboards/mechwild/puckbuddy/config.h
@@ -24,8 +24,6 @@
#define CIRQUE_PINNACLE_SPI_DIVISOR 8
#define CIRQUE_PINNACLE_SPI_CS_PIN A4
-#define TAP_CODE_DELAY 10
-
/* RGB settings, uncomment this define to enable RGB */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/mechwild/puckbuddy/info.json b/keyboards/mechwild/puckbuddy/info.json
index 684ddcb9c17c..9586cd075cbe 100644
--- a/keyboards/mechwild/puckbuddy/info.json
+++ b/keyboards/mechwild/puckbuddy/info.json
@@ -19,6 +19,9 @@
{"pin_a": "B3", "pin_b": "A15"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"indicators": {
"caps_lock": "C13",
"on_state": 0
diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h
index 1f204a12db88..98bad4a6157b 100644
--- a/keyboards/mechwild/waka60/config.h
+++ b/keyboards/mechwild/waka60/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
/* RGB settings, uncomment this define to enable RGB */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/mechwild/waka60/info.json b/keyboards/mechwild/waka60/info.json
index 6b5006c55db6..e33dd5a0102d 100644
--- a/keyboards/mechwild/waka60/info.json
+++ b/keyboards/mechwild/waka60/info.json
@@ -27,6 +27,9 @@
{"pin_a": "A3", "pin_b": "A2"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/mk65/config.h b/keyboards/mk65/config.h
deleted file mode 100644
index 7fa60c79f830..000000000000
--- a/keyboards/mk65/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright 2022 DeskDaily
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-#define TAP_CODE_DELAY 10
\ No newline at end of file
diff --git a/keyboards/mk65/info.json b/keyboards/mk65/info.json
index 0ad147641915..44a8e15f153a 100644
--- a/keyboards/mk65/info.json
+++ b/keyboards/mk65/info.json
@@ -13,6 +13,9 @@
{"pin_a": "B1", "pin_b": "B2"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"matrix_pins": {
diff --git a/keyboards/mode/m65s/config.h b/keyboards/mode/m65s/config.h
index ed3faacae0c2..80d31d8d7562 100644
--- a/keyboards/mode/m65s/config.h
+++ b/keyboards/mode/m65s/config.h
@@ -45,5 +45,3 @@ along with this program. If not, see .
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-#define TAP_CODE_DELAY 50
diff --git a/keyboards/mode/m65s/info.json b/keyboards/mode/m65s/info.json
index 06e49f7667a7..0a0c93f3f890 100644
--- a/keyboards/mode/m65s/info.json
+++ b/keyboards/mode/m65s/info.json
@@ -8,6 +8,9 @@
"pid": "0x6583",
"device_version": "0.0.1"
},
+ "qmk": {
+ "tap_keycode_delay": 50
+ },
"matrix_pins": {
"cols": ["C7", "A8", "A10", "A4", "A5", "A6", "C10", "A7", "C4", "C5", "A15", "B0", "B1", "B12", "B10", "B13"],
"rows": ["A3", "B14", "B15", "C9", "C6", "C11"]
diff --git a/keyboards/neito/config.h b/keyboards/neito/config.h
index 9c2f57a04e6f..7117516afb82 100644
--- a/keyboards/neito/config.h
+++ b/keyboards/neito/config.h
@@ -29,7 +29,3 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-
-/* Handle volume control issue with rotary encoder */
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/neito/info.json b/keyboards/neito/info.json
index e629debee93b..98b135756b57 100644
--- a/keyboards/neito/info.json
+++ b/keyboards/neito/info.json
@@ -18,6 +18,9 @@
{"pin_a": "B7", "pin_b": "B0"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"backlight": {
"pin": "B5",
"levels": 5,
diff --git a/keyboards/nightly_boards/octopadplus/config.h b/keyboards/nightly_boards/octopadplus/config.h
index 7547d5a97bb3..3d0b7f438c86 100644
--- a/keyboards/nightly_boards/octopadplus/config.h
+++ b/keyboards/nightly_boards/octopadplus/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/nightly_boards/octopadplus/info.json b/keyboards/nightly_boards/octopadplus/info.json
index 533cefc3c1be..7a27cef0208f 100644
--- a/keyboards/nightly_boards/octopadplus/info.json
+++ b/keyboards/nightly_boards/octopadplus/info.json
@@ -19,6 +19,9 @@
{"pin_a": "D1", "pin_b": "D0", "resolution": 5}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"rgblight": {
diff --git a/keyboards/nullbitsco/scramble/v1/config.h b/keyboards/nullbitsco/scramble/v1/config.h
deleted file mode 100644
index bb0ee7d7854b..000000000000
--- a/keyboards/nullbitsco/scramble/v1/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
-Copyright 2021 Jay Greco
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-/* NOTE: This config file is specific to AVR builds. */
-
-#pragma once
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/nullbitsco/scramble/v1/info.json b/keyboards/nullbitsco/scramble/v1/info.json
index 77a00d91f4bf..5a9aeef64be7 100644
--- a/keyboards/nullbitsco/scramble/v1/info.json
+++ b/keyboards/nullbitsco/scramble/v1/info.json
@@ -4,6 +4,9 @@
{"pin_a": "D6", "pin_b": "D7"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega328p",
"bootloader": "usbasploader",
"matrix_pins": {
diff --git a/keyboards/nullbitsco/scramble/v2/config.h b/keyboards/nullbitsco/scramble/v2/config.h
index 945a4da9deca..419a028c9f7b 100644
--- a/keyboards/nullbitsco/scramble/v2/config.h
+++ b/keyboards/nullbitsco/scramble/v2/config.h
@@ -19,8 +19,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
/* RP2040-specific defines*/
#define PICO_XOSC_STARTUP_DELAY_MULTIPLIER 64
#define RP2040_FLASH_GENERIC_03H
diff --git a/keyboards/nullbitsco/scramble/v2/info.json b/keyboards/nullbitsco/scramble/v2/info.json
index 5255c32205e7..2a89a1063b2e 100644
--- a/keyboards/nullbitsco/scramble/v2/info.json
+++ b/keyboards/nullbitsco/scramble/v2/info.json
@@ -4,6 +4,9 @@
{"pin_a": "GP24", "pin_b": "GP25"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "RP2040",
"bootloader": "rp2040",
"matrix_pins": {
diff --git a/keyboards/om60/config.h b/keyboards/om60/config.h
index fce35f33bca6..5977c819ede5 100644
--- a/keyboards/om60/config.h
+++ b/keyboards/om60/config.h
@@ -66,5 +66,3 @@ along with this program. If not, see .
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
#endif
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/om60/info.json b/keyboards/om60/info.json
index 7b1eb21b7c59..9d33fbe1c2a7 100644
--- a/keyboards/om60/info.json
+++ b/keyboards/om60/info.json
@@ -13,6 +13,9 @@
{"pin_a": "B4", "pin_b": "B5"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"hue_steps": 10,
"led_count": 69,
diff --git a/keyboards/orthocode/config.h b/keyboards/orthocode/config.h
index 896fadfa5ed2..f552f0f6db58 100644
--- a/keyboards/orthocode/config.h
+++ b/keyboards/orthocode/config.h
@@ -16,8 +16,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 10
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/orthocode/info.json b/keyboards/orthocode/info.json
index 24a39b4e8aba..49ea47835bf9 100644
--- a/keyboards/orthocode/info.json
+++ b/keyboards/orthocode/info.json
@@ -19,6 +19,9 @@
{"pin_a": "D1", "pin_b": "D0", "resolution": 1}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
diff --git a/keyboards/owlab/voice65/hotswap/config.h b/keyboards/owlab/voice65/hotswap/config.h
index 9b09742bcc25..89e5bf4345b4 100644
--- a/keyboards/owlab/voice65/hotswap/config.h
+++ b/keyboards/owlab/voice65/hotswap/config.h
@@ -91,5 +91,3 @@ along with this program. If not, see .
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/owlab/voice65/hotswap/info.json b/keyboards/owlab/voice65/hotswap/info.json
index e7db93f4c60b..cf6c2503b68c 100644
--- a/keyboards/owlab/voice65/hotswap/info.json
+++ b/keyboards/owlab/voice65/hotswap/info.json
@@ -22,6 +22,9 @@
{"pin_a": "B4", "pin_b": "B5"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"ws2812": {
"pin": "B15"
},
diff --git a/keyboards/owlab/voice65/soldered/config.h b/keyboards/owlab/voice65/soldered/config.h
index 9d81dd362081..ee882b0d41aa 100644
--- a/keyboards/owlab/voice65/soldered/config.h
+++ b/keyboards/owlab/voice65/soldered/config.h
@@ -92,5 +92,3 @@ along with this program. If not, see .
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/owlab/voice65/soldered/info.json b/keyboards/owlab/voice65/soldered/info.json
index 352be16ea45a..7e9d0be514f1 100644
--- a/keyboards/owlab/voice65/soldered/info.json
+++ b/keyboards/owlab/voice65/soldered/info.json
@@ -22,6 +22,9 @@
{"pin_a": "B4", "pin_b": "B5"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"ws2812": {
"pin": "B15"
},
diff --git a/keyboards/peranekofactory/tone/rev1/config.h b/keyboards/peranekofactory/tone/rev1/config.h
index c97fab915a3b..bbe3b73627f9 100644
--- a/keyboards/peranekofactory/tone/rev1/config.h
+++ b/keyboards/peranekofactory/tone/rev1/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/peranekofactory/tone/rev1/info.json b/keyboards/peranekofactory/tone/rev1/info.json
index 5a19b72ffeb2..67e08be6885e 100644
--- a/keyboards/peranekofactory/tone/rev1/info.json
+++ b/keyboards/peranekofactory/tone/rev1/info.json
@@ -13,6 +13,9 @@
{"pin_a": "B5", "pin_b": "B4"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 100
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"matrix_pins": {
diff --git a/keyboards/peranekofactory/tone/rev2/config.h b/keyboards/peranekofactory/tone/rev2/config.h
index c97fab915a3b..bbe3b73627f9 100644
--- a/keyboards/peranekofactory/tone/rev2/config.h
+++ b/keyboards/peranekofactory/tone/rev2/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see .
#pragma once
-#define TAP_CODE_DELAY 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/peranekofactory/tone/rev2/info.json b/keyboards/peranekofactory/tone/rev2/info.json
index 5a19b72ffeb2..67e08be6885e 100644
--- a/keyboards/peranekofactory/tone/rev2/info.json
+++ b/keyboards/peranekofactory/tone/rev2/info.json
@@ -13,6 +13,9 @@
{"pin_a": "B5", "pin_b": "B4"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 100
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"matrix_pins": {
diff --git a/keyboards/rgbkb/mun/config.h b/keyboards/rgbkb/mun/config.h
index 8e84cca0f7d0..882f1ffda8e1 100644
--- a/keyboards/rgbkb/mun/config.h
+++ b/keyboards/rgbkb/mun/config.h
@@ -133,7 +133,6 @@
#define TOUCH_UPDATE_INTERVAL 33
#define OLED_UPDATE_INTERVAL 33
-#define TAP_CODE_DELAY 5
#define WEAR_LEVELING_BACKING_SIZE 4096
#define WEAR_LEVELING_LOGICAL_SIZE 2048
diff --git a/keyboards/rgbkb/mun/rev1/info.json b/keyboards/rgbkb/mun/rev1/info.json
index 16d18f4d226f..93077a16adbb 100644
--- a/keyboards/rgbkb/mun/rev1/info.json
+++ b/keyboards/rgbkb/mun/rev1/info.json
@@ -30,6 +30,9 @@
{"pin_a": "B9", "pin_b": "A15"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 5
+ },
"split": {
"soft_serial_pin": "A9"
},
diff --git a/keyboards/rgbkb/sol3/config.h b/keyboards/rgbkb/sol3/config.h
index 14dc56b121b1..d1b8b763fe66 100644
--- a/keyboards/rgbkb/sol3/config.h
+++ b/keyboards/rgbkb/sol3/config.h
@@ -133,7 +133,6 @@
#define TOUCH_UPDATE_INTERVAL 33
#define OLED_UPDATE_INTERVAL 33
-#define TAP_CODE_DELAY 5
/* Audio Configuration */
#define AUDIO_PIN A4
diff --git a/keyboards/rgbkb/sol3/rev1/info.json b/keyboards/rgbkb/sol3/rev1/info.json
index d8c1280239d2..0b6d65d9727c 100644
--- a/keyboards/rgbkb/sol3/rev1/info.json
+++ b/keyboards/rgbkb/sol3/rev1/info.json
@@ -49,6 +49,9 @@
}
}
},
+ "qmk": {
+ "tap_keycode_delay": 5
+ },
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/rocketboard_16/config.h b/keyboards/rocketboard_16/config.h
index afa16c75b7d4..2c81b4cb7bd8 100644
--- a/keyboards/rocketboard_16/config.h
+++ b/keyboards/rocketboard_16/config.h
@@ -32,9 +32,6 @@ along with this program. If not, see .
#define OLED_DISPLAY_128X64
#define OLED_FONT_H "custom_font.h"
-// Allows for rotary encoder volume control
-#define TAP_CODE_DELAY 20
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/rocketboard_16/info.json b/keyboards/rocketboard_16/info.json
index cf5699b38d18..4b0b5f481a9b 100644
--- a/keyboards/rocketboard_16/info.json
+++ b/keyboards/rocketboard_16/info.json
@@ -21,6 +21,9 @@
{"pin_a": "A2", "pin_b": "A3"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 20
+ },
"bootmagic": {
"matrix": [4, 1]
},
diff --git a/keyboards/sofle/keyhive/config.h b/keyboards/sofle/keyhive/config.h
index 63450e2536e9..1e90cbab4887 100755
--- a/keyboards/sofle/keyhive/config.h
+++ b/keyboards/sofle/keyhive/config.h
@@ -18,8 +18,6 @@
#pragma once
-#define TAP_CODE_DELAY 10
-
// OLED settings
#define OLED_TIMEOUT 80000
#define OLED_BRIGHTNESS 90
diff --git a/keyboards/sofle/keyhive/info.json b/keyboards/sofle/keyhive/info.json
index d4718d3a8b99..1f7ae8b20983 100644
--- a/keyboards/sofle/keyhive/info.json
+++ b/keyboards/sofle/keyhive/info.json
@@ -43,6 +43,9 @@
}
}
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/sofle/rev1/config.h b/keyboards/sofle/rev1/config.h
deleted file mode 100644
index a444e5490339..000000000000
--- a/keyboards/sofle/rev1/config.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#pragma once
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/sofle/rev1/info.json b/keyboards/sofle/rev1/info.json
index 9863fcd98392..5ab71ff1e37b 100644
--- a/keyboards/sofle/rev1/info.json
+++ b/keyboards/sofle/rev1/info.json
@@ -31,6 +31,9 @@
"tapping": {
"term": 100
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/tkw/grandiceps/config.h b/keyboards/tkw/grandiceps/config.h
index 0fee7d0f77c4..05b2be5c574a 100644
--- a/keyboards/tkw/grandiceps/config.h
+++ b/keyboards/tkw/grandiceps/config.h
@@ -18,7 +18,6 @@
#define SELECT_SOFT_SERIAL_SPEED 1
#define MATRIX_IO_DELAY 5
-#define TAP_CODE_DELAY 10
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/tkw/grandiceps/info.json b/keyboards/tkw/grandiceps/info.json
index a7ff7dd90ff6..787284ec0f27 100644
--- a/keyboards/tkw/grandiceps/info.json
+++ b/keyboards/tkw/grandiceps/info.json
@@ -34,6 +34,9 @@
}
}
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "STM32F411",
"bootloader": "stm32-dfu",
"board": "BLACKPILL_STM32_F411",
diff --git a/keyboards/tkw/stoutgat/v1/config.h b/keyboards/tkw/stoutgat/v1/config.h
deleted file mode 100644
index b168318aa029..000000000000
--- a/keyboards/tkw/stoutgat/v1/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*Copyright 2020 Thys de Wet
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-#define TAP_CODE_DELAY 10
diff --git a/keyboards/tkw/stoutgat/v1/info.json b/keyboards/tkw/stoutgat/v1/info.json
index 334ace4d3ac7..9d7a60a4b97c 100644
--- a/keyboards/tkw/stoutgat/v1/info.json
+++ b/keyboards/tkw/stoutgat/v1/info.json
@@ -19,6 +19,9 @@
{"pin_a": "B0", "pin_b": "B1"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"processor": "atmega32a",
"bootloader": "usbasploader",
"community_layouts": ["65_iso", "65_ansi"],
diff --git a/keyboards/tkw/stoutgat/v2/config.h b/keyboards/tkw/stoutgat/v2/config.h
index 5f391a218762..c9230daf5751 100644
--- a/keyboards/tkw/stoutgat/v2/config.h
+++ b/keyboards/tkw/stoutgat/v2/config.h
@@ -16,7 +16,6 @@
#pragma once
#define MATRIX_IO_DELAY 5
-#define TAP_CODE_DELAY 10
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/tkw/stoutgat/v2/info.json b/keyboards/tkw/stoutgat/v2/info.json
index a73b8f5e3b1d..d48e2b5381fc 100644
--- a/keyboards/tkw/stoutgat/v2/info.json
+++ b/keyboards/tkw/stoutgat/v2/info.json
@@ -27,6 +27,9 @@
{"pin_a": "B12", "pin_b": "B13"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 10
+ },
"community_layouts": ["65_iso", "65_ansi"],
"layouts": {
"LAYOUT_65_ansi": {
diff --git a/keyboards/yandrstudio/nz67v2/config.h b/keyboards/yandrstudio/nz67v2/config.h
index fb0ac36bc214..dba2f773950a 100644
--- a/keyboards/yandrstudio/nz67v2/config.h
+++ b/keyboards/yandrstudio/nz67v2/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define TAP_CODE_DELAY 15
-
/* RGB Matrix */
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/yandrstudio/nz67v2/info.json b/keyboards/yandrstudio/nz67v2/info.json
index d4663a160d38..89af204fc3dc 100644
--- a/keyboards/yandrstudio/nz67v2/info.json
+++ b/keyboards/yandrstudio/nz67v2/info.json
@@ -23,6 +23,9 @@
{"pin_a": "A9", "pin_b": "A10"}
]
},
+ "qmk": {
+ "tap_keycode_delay": 15
+ },
"layouts": {
"LAYOUT_all": {
"layout": [