Installation | pivccu-modules-dkms | No headers found

[DerDominik]

Describe the issue you are experiencing

I'm trying to install RaspberryMatic on my RPi4 to use it with Home Assistant on the same device.
I did all the installation steps, but installing/usage of pivccu-modules-dkms is not possible due failure message "No headers found".

Afterwards I tried "sudo dpkg-reconfigure pivccu-modules-dkms"

Disabled DKMS service ... Done
Ensure non mixed processor architecure ... Done
Create kernel modules ... FAILED
Check kernel headers ... FAILED
No headers found for current active kernel 6.6.56-v8+
Enable DKMS service ... Done

But from my point of view everything should be correct.
Logs from raspberrypi-kernel and raspberrypi-kernel-headers are posted in log-section.

Describe the behavior you expected

Installation should be suceeded.

Steps to reproduce the issue

1. Do all installation steps as described in the wiki Installation HomeAssistant -> HomeAssistant Supervised

What is the version this bug report is based on?

Not possible until now

Which base platform are you running?

rpi4 (RaspberryPi4, ARM64/aarch64)

Which HomeMatic/homematicIP radio module are you using?

HM-MOD-RPI-PCB

Anything in the logs that might be useful for us?

apt show raspberrypi-kernel -->

Package: raspberrypi-kernel
Version: 1:1.20230405-1
Priority: optional
Section: kernel
Source: raspberrypi-firmware
Maintainer: Serge Schneider <serge@raspberrypi.org>
Installed-Size: 32,1 MB
Provides: linux-image, wireguard-modules (= 1.0.0)
Breaks: raspberrypi-bootloader (<< 1.20160324-1)
Replaces: raspberrypi-bootloader (<< 1.20160324-1)
Homepage: https://github.com/raspberrypi/firmware
Download-Size: 27,0 MB
APT-Manual-Installed: yes
APT-Sources: http://archive.raspberrypi.com/debian bookworm/main arm64 Packages
Description: Raspberry Pi bootloader
 This package contains the Raspberry Pi Linux kernel.

apt show raspberrypi-kernel-headers -->

Package: raspberrypi-kernel-headers
Version: 1:1.20230405-1
Priority: optional
Section: kernel
Source: raspberrypi-firmware
Maintainer: Serge Schneider <serge@raspberrypi.org>
Installed-Size: 64,8 MB
Provides: linux-headers
Depends: libc6 (>= 2.17)
Homepage: https://github.com/raspberrypi/firmware
Download-Size: 10,2 MB
APT-Manual-Installed: yes
APT-Sources: http://archive.raspberrypi.com/debian bookworm/main arm64 Packages
Description: Header files for the Raspberry Pi Linux kernel
 This package provides the architecture-specific kernel header files for
 the Raspberry Pi Linux kernel, generally used for building out-of-tree
 kernel modules.

### Additional information

_No response_