Skip to content

Latest commit

 

History

History
142 lines (102 loc) · 5.01 KB

README.LINUX.DEVELOPERS.md

File metadata and controls

142 lines (102 loc) · 5.01 KB
Raw

Introduction

PasswordSafe has being ported to Linux using the wxWidgets user interface library. Following are notes for programmers wishing to build the Linux version. Currently, PasswordSafe is being built on Debian-based platforms (Debian and Ubuntu), and Fedora, so requirements are described in terms of .deb and .rpm packages.

Short Guide

The following should work for Debian and Fedora-based distros:

  1. Download the source code from https://github.com/pwsafe/pwsafe/archive/master.zip or clone the repository via git:

    $ git clone https://github.com/pwsafe/pwsafe.git

  2. Setup dependencies

    $ cd pwsafe
    $ sudo sh Misc/setup-linux-dev-env.sh

  3. Setup the build environment:

    $ mkdir build $ cd build $ cmake .. (See below on how to customize your build)

  4. Make the executables:

    $ make This will create a 'pwsafe' executable in your build directory.

  5. Run the core test suite:

    $ make test This will run coretest in the src/test sub-directory.
    If it encounters errors, check your locale settings. It is known to work with: LC_ALL=en_US.UTF-8

  6. Make the package:

  • To build a deb package:
    $ cpack -G DEB ..
  • To build an RPM package:
    $ cpack -G RPM ..
  1. Install

  • To install the deb package you've just built:

    $ sudo dpkg -i passwordsafe-\<debian|ubuntu\>-\<version\>.\<arch\>.deb

  • To install the rpm package you've just built:

    $ dnf install passwordsafe-fedora-\<version\>.\<arch\>.rpm

Requirements

The packages that PasswordSafe depends upon are listed in Misc/setup-linux-dev-env.sh. Note that some of the package names differ between DEB and RPM distros, and some, unfortunately, bwteeen versions within a distro. The script attemps to take all this into account. Running it as root or via sudo should install all the packages needed to build PasswordSafe.

Customization

The easiest way to customize the build is by running cmake-gui instead of cmake from the build directory, e.g.,

$ cmake-gui ..

Alternately, you can pass cmake flags, such as:

`$ cmake -D CMAKE_BUILD_TYPE=Debug -D NO_QR=ON -D NO_GTEST=ON -D wxWidgets_CONFIG_EXECUTABLE=~/wxWidgets-3.1.3/wxbuild/wx-config ..`

If you have a custom build of the Wx library you would like to use you can point to its 'wx-config' command by use of cmake's command line option 'wxWidgets_CONFIG_EXECUTABLE'. You can also disable the gtest unit testing (option NO_GTEST), YubiKey support (option NO_YUBI) and QR support (option NO_QR) if they are not required.

wxWidgets

Some distributions lag behind the required version of wxWidgets, providing a version older than that required by PasswordSafe. If this is the case, you can either:

(a) Get the wxWidgets package from the relevant link in http://wxwidgets.org/downloads/ under "Binaries", or

(b) Download the sources from here http://www.wxwidgets.org/downloads/

and build the libraries yourself. If you do so:

  1. Configure the build using the following:

    $ ./configure --disable-shared --enable-stl --enable-utf8only \
--enable-intl --enable-xlocale --enable-debug_gdb

  2. Set the WX_CONFIG environment variable to point to the correct location, e.g. add the following to you .bashrc file:

    export WX_CONFIG=$HOME/src/wxWidgets-3.0.2/wx-config

Note that we use a static build of wxWidgets in order to simplify the distribution, not requiring users to get the wx3 package, and avoiding potential conflicts with 2.8.

Alternatively, the Wx library can be build using cmake. By default shared libraries with unicode support are build. For a static build set option 'wxBUILD_SHARED' to 'OFF'.

Unpack the downloaded wxWidgets package and change into its directory. Create a new directory for the build artefacts and change to that one. Execute cmake with appropriate preprocessor symbols and run make (consider using option '-j').

cd <wxWidgets directory, e.g. wxWidgets-3.1.3>
mkdir <build directory, e.g. wxbuild>
cd <build directory, e.g. wxbuild>
cmake -D wxUSE_STL=ON -D wxBUILD_SHARED=OFF ..

The internationalization system (option wxUSE_INTL) and x-locale support (option wxUSE_XLOCALE) is also enabled by default. For a list of options to tune the build see also the documentation ( 3.0, 3.1 ) about wxUSE preprocessor symbols.

libykpers-1 and ykpers-devel

If your distro doesn't have the development version of this you will need to build and install it from the source: https://github.com/Yubico/yubikey-personalization.git

In case you want to specify a non-standard location from which yubikey-personalization headers/libs are to be used, invoke "make" like this:

$ YBPERS_LIBPATH=<dir with libykpers-1.a or .so> YBPERS_INC=<yubikey-pers dir/ykcore/> make unicode{release,debug}

If your build linked with libykpers-1.so in a non-standard location, you might need to invoke pwsafe as

$ LD_LIBRARY_PATH=<libykpers-1.a or libykpers-1.so dir> pwsafe