Release v0.9.10

[jon-harper]

New Features

Major New Features

• Added two (2) new CPU bays for a total of four (4).
• Heat set insert support changed to M3 x 5mm (OD) x 4mm (L) (Voron-style).
• Front base support for toggle switches.
• Rear main body with two (2) external fans replaced by a four (4) interal mounts.
• "Full HSI" case option with most fasteners mating with an insert.

Additional Improvements

• Improved: Crossbar version added with HSI support, better zip tie anchors.
• Improved: Long lower bay trays now mount sideways, one additional tray available.
• Improved: New bottom panel template and panel options.
• Added: Additional zip tie anchors, particularly to the front main body.
• Improved: CPU tray guides take up significantly less room.
• New: Support for 12mm and 12.5mm toggle switches.
• New: MCU trays with mounts for dual MCUs.
• New: Slide-out storage for the CPU bay.
• Improved: Rear panel template now provides support for the lid.
• Improved: Display panel template now fits betters and prints with less material.

New Hardware Support

Hardware	Mount Location(s)	Notes
Mean Well SE-450	PSU Tray
Mean Well LRS-450	PSU Tray
Mean Well LRS-600	PSU Tray	Fit test needed.
Mean Well LRS-25-5	Lower bay tray	Contributed by Mr Meh.
Creality 2.X MCUs	MCU Tray	Contributed by Mr Meh.
FYSETC Spider	MCU Tray	Contributed by Killajoedotcom.
MKS Monster8	MCU Tray	Fit test needed.
MKS Skipr	MCU Tray	Fit test needed.
BIGTREETECH 5" Pi TFT	Display Panel	Contributed by MaffooClock.
BIGTREETECH SKR Pico	MCU Tray
Omron puck-style relays	Lower bay tray	Compatible with most clones.
BIGTREETECH U2C CAN adapter	Lower bay tray	Contributed by edgy.
50mm x 12mm fans	Any panel	50x10 and 50x15 pending fit tests.

Fixes

• Issue Display template is faulty #91: Display template is faulty
• Issue Lower bay tray standoffs need a fillet #81: Lower bay tray standoffs need a fillet
• Issue Micro Fit 3 pinouts for rear panels are missing #59: Micro Fit 3 pinouts for rear panels are missing
• Issue Add a power switch cover to prevent accidental bumping #94]: Add a power switch cover to prevent accidental bumping
• Issue Lower bay tray standoffs should be tapered #114: Lower bay standoffs should be tapered
• Issue Videos should not auto-download #111: Videos should not auto-download
• Issue Templates should have a version code #102: Template should have a version code
• Issue Panel mounted connectors template is out of date #62: Panel mounted connectors template is out of date

Documentation & Repository

• Documentation site
  • Added contribution information.
  • Cleaned up wording on introductory pages.
  • All fixed BOM parts have example links.
  • Added a simple upgrading guide and templates page.
  • Simplified HSI assembly section.
• Repository
  • Some file names have additional qualifiers where multiple variations now exist, e.g. "stock" vs. "HSI".
  • Fixed a number of stable files that were never copied or updated from unstable.

---

This discussion was created from the release Release v0.9.10.