dmx512-controller-board.elf.launch

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<launchConfiguration type="com.atollic.hardwaredebug.launch.launchConfigurationType">
<intAttribute key="com.atollic.hardwaredebug.launch.formatVersion" value="2"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.hwinitCommands" value="# Initialize your hardware here&#10;"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.initCommands" value=""/>
<stringAttribute key="com.atollic.hardwaredebug.launch.ipAddress" value="localhost"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.jtagDevice" value="ST-LINK"/>
<intAttribute key="com.atollic.hardwaredebug.launch.portNumber" value="61234"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.remoteCommand" value="target extended-remote"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.runCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers&#10;# Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode&#10;#monitor flash set_parallelism_mode 2&#10;&#10;# Set character encoding&#10;set host-charset CP1252&#10;set target-charset CP1252&#10;&#10;# Reset to known state&#10;monitor reset&#10;&#10;# Load the program executable&#10;load&#9;&#9;&#10;&#10;# Reset the chip to get to a known state. Remove &quot;monitor reset&quot; command &#10;#  if the code is not located at default address and does not run by reset. &#10;monitor reset&#10;&#10;# Enable Debug connection in low power modes (DBGMCU-&gt;CR)&#10;set *0xE0042004 = (*0xE0042004) | 0x7&#10;&#10;# Set a breakpoint at main().&#10;tbreak main&#10;&#10;# Run to the breakpoint.&#10;continue"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.serverParam" value="-p 61234 -l 1 -d -s"/>
<booleanAttribute key="com.atollic.hardwaredebug.launch.startServer" value="true"/>
<booleanAttribute key="com.atollic.hardwaredebug.launch.swd_mode" value="true"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.swv_port" value="61235"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_div" value="8"/>
<stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_hclk" value="8000000"/>
<booleanAttribute key="com.atollic.hardwaredebug.launch.swv_wait_for_sync" value="true"/>
<intAttribute key="com.atollic.hardwaredebug.launch.trace_system" value="0"/>
<booleanAttribute key="com.atollic.hardwaredebug.launch.useRemoteTarget" value="true"/>
<booleanAttribute key="com.atollic.hardwaredebug.launch.verify_flash_download" value="true"/>
<booleanAttribute key="com.atollic.hardwaredebug.stlink.enable_logging" value="false"/>
<stringAttribute key="com.atollic.hardwaredebug.stlink.log_file" value="/home/user/code/dmx512-controller-board/Debug/st-link_gdbserver_log.txt"/>
<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb"/>
<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/dmx512-controller-board.elf"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="dmx512-controller-board"/>
<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
<listEntry value="/dmx512-controller-board"/>
</listAttribute>
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
<listEntry value="4"/>
</listAttribute>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList context=&quot;reserved-for-future-use&quot;/&gt;&#10;"/>
<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
</launchConfiguration>