-
Notifications
You must be signed in to change notification settings - Fork 119
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Exception happened #374
Comments
Doesn't surprise me. Wifi doesn't recover after radar detected, and especially doesn't recover if on 160hz width. |
Thanks for the workaround, but I need to keep it in a DFS channel so that I can get a power boost. |
In theory yes, someone could, however in practice this is going to be very hard considering that the firmware is closed source and has no public documentation. |
Bu couldn't we by reading the code understand it and make up our own documentation? |
@tiagogaspar8 The drivers that are added to the kernel are open sourced, but the firmware that runs on the wireless chipset is closed source. |
I see waht you mean, but are the issues from the firmware? or are they from the driver? Cause for example in the stock Linksys firmware the firmware used in the proprietary driver is the same, actually it is an older version, but the issues we (at least that I see) aren't in the Linksys firmware so that leaves me to assume the bug is in the driver and not the firmware, see what I mean? |
The open source version of mwlwifi is missing Linksys/Belkins' proprietary implementation of DFS calibration/radio detection leveraging the use of radio2 (mwifiex). It's probably causing mayhem because of this. Google searching with the keywords: |
I guess it will never work, did yuhhaurlin maybe stop because Marvell Wireless was bought by NXP? |
This happens from time to time in my router WRT3200ACM with the 88W8964.
The text was updated successfully, but these errors were encountered: