shared_types.go

/*
Copyright 2020 The Kubernetes Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/

package v1beta1

import v1 "sigs.k8s.io/gateway-api/apis/v1"

// ParentReference identifies an API object (usually a Gateway) that can be considered
// a parent of this resource (usually a route). The only kind of parent resource
// with "Core" support is Gateway. This API may be extended in the future to
// support additional kinds of parent resources, such as HTTPRoute.
//
// Note that there are specific rules for ParentRefs which cross namespace
// boundaries. Cross-namespace references are only valid if they are explicitly
// allowed by something in the namespace they are referring to. For example:
// Gateway has the AllowedRoutes field, and ReferenceGrant provides a
// generic way to enable any other kind of cross-namespace reference.
//
// The API object must be valid in the cluster; the Group and Kind must
// be registered in the cluster for this reference to be valid.
// +k8s:deepcopy-gen=false
type ParentReference = v1.ParentReference

// CommonRouteSpec defines the common attributes that all Routes MUST include
// within their spec.
// +k8s:deepcopy-gen=false
type CommonRouteSpec = v1.CommonRouteSpec

// PortNumber defines a network port.
//
// +kubebuilder:validation:Minimum=1
// +kubebuilder:validation:Maximum=65535
type PortNumber = v1.PortNumber

// BackendRef defines how a Route should forward a request to a Kubernetes
// resource.
//
// Note that when a namespace different than the local namespace is specified, a
// ReferenceGrant object is required in the referent namespace to allow that
// namespace's owner to accept the reference. See the ReferenceGrant
// documentation for details.
// +k8s:deepcopy-gen=false
type BackendRef = v1.BackendRef

// RouteConditionType is a type of condition for a route.
type RouteConditionType = v1.RouteConditionType

// RouteConditionReason is a reason for a route condition.
type RouteConditionReason = v1.RouteConditionReason

const (
	// This condition indicates whether the route has been accepted or rejected
	// by a Gateway, and why.
	//
	// Possible reasons for this condition to be true are:
	//
	// * "Accepted"
	//
	// Possible reasons for this condition to be False are:
	//
	// * "NotAllowedByListeners"
	// * "NoMatchingListenerHostname"
	// * "UnsupportedValue"
	//
	// Possible reasons for this condition to be Unknown are:
	//
	// * "Pending"
	//
	// Controllers may raise this condition with other reasons,
	// but should prefer to use the reasons listed above to improve
	// interoperability.
	RouteConditionAccepted RouteConditionType = "Accepted"

	// This reason is used with the "Accepted" condition when the Route has been
	// accepted by the Gateway.
	RouteReasonAccepted RouteConditionReason = "Accepted"

	// This reason is used with the "Accepted" condition when the route has not
	// been accepted by a Gateway because the Gateway has no Listener whose
	// allowedRoutes criteria permit the route
	RouteReasonNotAllowedByListeners RouteConditionReason = "NotAllowedByListeners"

	// This reason is used with the "Accepted" condition when the Gateway has no
	// compatible Listeners whose Hostname matches the route
	RouteReasonNoMatchingListenerHostname RouteConditionReason = "NoMatchingListenerHostname"

	// This reason is used with the "Accepted" condition when a value for an Enum
	// is not recognized.
	RouteReasonUnsupportedValue RouteConditionReason = "UnsupportedValue"

	// This reason is used with the "Accepted" when a controller has not yet
	// reconciled the route.
	RouteReasonPending RouteConditionReason = "Pending"

	// This condition indicates whether the controller was able to resolve all
	// the object references for the Route.
	//
	// Possible reasons for this condition to be true are:
	//
	// * "ResolvedRefs"
	//
	// Possible reasons for this condition to be false are:
	//
	// * "RefNotPermitted"
	// * "InvalidKind"
	// * "BackendNotFound"
	//
	// Controllers may raise this condition with other reasons,
	// but should prefer to use the reasons listed above to improve
	// interoperability.
	RouteConditionResolvedRefs RouteConditionType = "ResolvedRefs"

	// This reason is used with the "ResolvedRefs" condition when the condition
	// is true.
	RouteReasonResolvedRefs RouteConditionReason = "ResolvedRefs"

	// This reason is used with the "ResolvedRefs" condition when
	// one of the Listener's Routes has a BackendRef to an object in
	// another namespace, where the object in the other namespace does
	// not have a ReferenceGrant explicitly allowing the reference.
	RouteReasonRefNotPermitted RouteConditionReason = "RefNotPermitted"

	// This reason is used with the "ResolvedRefs" condition when
	// one of the Route's rules has a reference to an unknown or unsupported
	// Group and/or Kind.
	RouteReasonInvalidKind RouteConditionReason = "InvalidKind"

	// This reason is used with the "ResolvedRefs" condition when one of the
	// Route's rules has a reference to a resource that does not exist.
	RouteReasonBackendNotFound RouteConditionReason = "BackendNotFound"
)

// RouteParentStatus describes the status of a route with respect to an
// associated Parent.
// +k8s:deepcopy-gen=false
type RouteParentStatus = v1.RouteParentStatus

// RouteStatus defines the common attributes that all Routes MUST include within
// their status.
// +k8s:deepcopy-gen=false
type RouteStatus = v1.RouteStatus

// Hostname is the fully qualified domain name of a network host. This matches
// the RFC 1123 definition of a hostname with 2 notable exceptions:
//
//  1. IPs are not allowed.
//  2. A hostname may be prefixed with a wildcard label (`*.`). The wildcard
//     label must appear by itself as the first label.
//
// Hostname can be "precise" which is a domain name without the terminating
// dot of a network host (e.g. "foo.example.com") or "wildcard", which is a
// domain name prefixed with a single wildcard label (e.g. `*.example.com`).
//
// Note that as per RFC1035 and RFC1123, a *label* must consist of lower case
// alphanumeric characters or '-', and must start and end with an alphanumeric
// character. No other punctuation is allowed.
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
// +kubebuilder:validation:Pattern=`^(\*\.)?[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$`
type Hostname = v1.Hostname

// PreciseHostname is the fully qualified domain name of a network host. This
// matches the RFC 1123 definition of a hostname with 1 notable exception that
// numeric IP addresses are not allowed.
//
// Note that as per RFC1035 and RFC1123, a *label* must consist of lower case
// alphanumeric characters or '-', and must start and end with an alphanumeric
// character. No other punctuation is allowed.
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
// +kubebuilder:validation:Pattern=`^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$`
type PreciseHostname = v1.PreciseHostname

// Group refers to a Kubernetes Group. It must either be an empty string or a
// RFC 1123 subdomain.
//
// This validation is based off of the corresponding Kubernetes validation:
// https://github.com/kubernetes/apimachinery/blob/02cfb53916346d085a6c6c7c66f882e3c6b0eca6/pkg/util/validation/validation.go#L208
//
// Valid values include:
//
// * "" - empty string implies core Kubernetes API group
// * "networking.k8s.io"
// * "foo.example.com"
//
// Invalid values include:
//
// * "example.com/bar" - "/" is an invalid character
//
// +kubebuilder:validation:MaxLength=253
// +kubebuilder:validation:Pattern=`^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$`
type Group = v1.Group

// Kind refers to a Kubernetes Kind.
//
// Valid values include:
//
// * "Service"
// * "HTTPRoute"
//
// Invalid values include:
//
// * "invalid/kind" - "/" is an invalid character
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=63
// +kubebuilder:validation:Pattern=`^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$`
type Kind = v1.Kind

// ObjectName refers to the name of a Kubernetes object.
// Object names can have a variety of forms, including RFC 1123 subdomains,
// RFC 1123 labels, or RFC 1035 labels.
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
type ObjectName = v1.ObjectName

// Namespace refers to a Kubernetes namespace. It must be a RFC 1123 label.
//
// This validation is based off of the corresponding Kubernetes validation:
// https://github.com/kubernetes/apimachinery/blob/02cfb53916346d085a6c6c7c66f882e3c6b0eca6/pkg/util/validation/validation.go#L187
//
// This is used for Namespace name validation here:
// https://github.com/kubernetes/apimachinery/blob/02cfb53916346d085a6c6c7c66f882e3c6b0eca6/pkg/api/validation/generic.go#L63
//
// Valid values include:
//
// * "example"
//
// Invalid values include:
//
// * "example.com" - "." is an invalid character
//
// +kubebuilder:validation:Pattern=`^[a-z0-9]([-a-z0-9]*[a-z0-9])?$`
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=63
type Namespace = v1.Namespace

// SectionName is the name of a section in a Kubernetes resource.
//
// In the following resources, SectionName is interpreted as the following:
//
// * Gateway: Listener name
// * HTTPRoute: HTTPRouteRule name
// * Service: Port name
//
// Section names can have a variety of forms, including RFC 1123 subdomains,
// RFC 1123 labels, or RFC 1035 labels.
//
// This validation is based off of the corresponding Kubernetes validation:
// https://github.com/kubernetes/apimachinery/blob/02cfb53916346d085a6c6c7c66f882e3c6b0eca6/pkg/util/validation/validation.go#L208
//
// Valid values include:
//
// * "example"
// * "foo-example"
// * "example.com"
// * "foo.example.com"
//
// Invalid values include:
//
// * "example.com/bar" - "/" is an invalid character
//
// +kubebuilder:validation:Pattern=`^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$`
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
type SectionName = v1.SectionName

// GatewayController is the name of a Gateway API controller. It must be a
// domain prefixed path.
//
// Valid values include:
//
// * "example.com/bar"
//
// Invalid values include:
//
// * "example.com" - must include path
// * "foo.example.com" - must include path
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
// +kubebuilder:validation:Pattern=`^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*\/[A-Za-z0-9\/\-._~%!$&'()*+,;=:]+$`
type GatewayController = v1.GatewayController

// AnnotationKey is the key of an annotation in Gateway API. This is used for
// validation of maps such as TLS options. This matches the Kubernetes
// "qualified name" validation that is used for annotations and other common
// values.
//
// Valid values include:
//
// * example
// * example.com
// * example.com/path
// * example.com/path.html
//
// Invalid values include:
//
// * example~ - "~" is an invalid character
// * example.com. - can not start or end with "."
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
// +kubebuilder:validation:Pattern=`^(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9]/?)*$`
type AnnotationKey = v1.AnnotationKey

// AnnotationValue is the value of an annotation in Gateway API. This is used
// for validation of maps such as TLS options. This roughly matches Kubernetes
// annotation validation, although the length validation in that case is based
// on the entire size of the annotations struct.
//
// +kubebuilder:validation:MinLength=0
// +kubebuilder:validation:MaxLength=4096
type AnnotationValue = v1.AnnotationValue

// AddressType defines how a network address is represented as a text string.
// This may take two possible forms:
//
// * A predefined CamelCase string identifier (currently limited to `IPAddress` or `Hostname`)
// * A domain-prefixed string identifier (like `acme.io/CustomAddressType`)
//
// Values `IPAddress` and `Hostname` have Extended support.
//
// The `NamedAddress` value has been deprecated in favor of implementation
// specific domain-prefixed strings.
//
// All other values, including domain-prefixed values have Implementation-specific support,
// which are used in implementation-specific behaviors. Support for additional
// predefined CamelCase identifiers may be added in future releases.
//
// +kubebuilder:validation:MinLength=1
// +kubebuilder:validation:MaxLength=253
// +kubebuilder:validation:Pattern=`^Hostname|IPAddress|NamedAddress|[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*\/[A-Za-z0-9\/\-._~%!$&'()*+,;=:]+$`
type AddressType = v1.AddressType

// Duration is a string value representing a duration in time. The format is as specified
// in GEP-2257, a strict subset of the syntax parsed by Golang time.ParseDuration.
type Duration = v1.Duration

const (
	// A textual representation of a numeric IP address. IPv4
	// addresses must be in dotted-decimal form. IPv6 addresses
	// must be in a standard IPv6 text representation
	// (see [RFC 5952](https://tools.ietf.org/html/rfc5952)).
	//
	// This type is intended for specific addresses. Address ranges are not
	// supported (e.g. you can not use a CIDR range like 127.0.0.0/24 as an
	// IPAddress).
	//
	// Support: Extended
	IPAddressType AddressType = "IPAddress"

	// A Hostname represents a DNS based ingress point. This is similar to the
	// corresponding hostname field in Kubernetes load balancer status. For
	// example, this concept may be used for cloud load balancers where a DNS
	// name is used to expose a load balancer.
	//
	// Support: Extended
	HostnameAddressType AddressType = "Hostname"

	// A NamedAddress provides a way to reference a specific IP address by name.
	// For example, this may be a name or other unique identifier that refers
	// to a resource on a cloud provider such as a static IP.
	//
	// The `NamedAddress` type has been deprecated in favor of implementation
	// specific domain-prefixed strings.
	//
	// Support: Implementation-specific
	NamedAddressType AddressType = "NamedAddress"
)