Welcome to userspace-tablet-driver-daemon Discussions!

[kurikaesu]

👋 Welcome!

We’re using Discussions as a place to discuss the future of this driver including any ideas or potential feature requests. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other users and maintainers members.
• Welcome others and are open-minded.

[shabtai2]

Hi ! I bought a Huion KD100 mini Keydial and i don' t understand how to use userspace-tablet-driver-daemon.
lsusb give me :
Bus 001 Device 009: ID 256c:006d HUION Huion Tablet_KD100
Can you give me please an exemple for mapping keys please ?

( I'm on Manjaro )

[kurikaesu]

Hello, I've just pushed a new commit to add a new firmware to be recognised as the KD100 device: dccc5fb

You need to run the driver which should detect the device like this:

Handling Huion tablet
Got firmware HUION_T200_210315
Resolved device name to Huion KD100 mini Keydial
Attached to interface 0
Setup completed on interface 0
Setup completed on interface 1
Setup completed on interface 2
Set up config for device 512: (Huion KD100 mini Keydial)
Got new socket connection
Handling get connected devices request
Connected device: 512

This will set up default keybinds for the device.
These keybinds can be customised using the GUI here: https://github.com/kurikaesu/userspace-tablet-driver-gui

I've just tested the GUI with the above commit and can confirm that the keybinds are flowing through correctly.

[kurikaesu]

Thanks for that. Looks like you have a second unsupported tablet that the Huion driver is also detecting. I'll add your device ID for the KD100 to the supported list and the GUI should start working automatically after rebuilding.

[shabtai2]

Yeah this is a GAOMON M106K Pro Tablette detected.
Ok let me know when i can rebuild.

[shabtai2]

Hello, i added :
} else if (firmwareName == L"HUION_T200_210309" || firmwareName == L"HUION_T200_210315" || firmwareName == L"HUION_T200_210430") {

on the line 97 and 122 of src/huion_tablet.cpp
I'm not dev but it seems to work after rebuild.

[kurikaesu]

Excellent! I'll add those to the code and push out an update when I can. Thanks for your help!

[shabtai2]

No way ! Thanks for YOUR help and you patience with me =)