diff --git a/docs/examples/neko/README.md b/docs/examples/neko/README.md
index 0777cc4..a5f04b0 100644
--- a/docs/examples/neko/README.md
+++ b/docs/examples/neko/README.md
@@ -20,15 +20,14 @@ To run this example, you need:
 * a [deployed STUNner](../../INSTALL.md#installation-1) (presumably the latest stable version),
 * optionally, an [Ingress controller](../TLS.md#ingress) to ingest traffic into the cluster.
 
-### Quick installation
+### STUNner configuration
 
-The simplest way to deploy the demo is to clone the [STUNner git repository](https://github.com/l7mp/stunner) and deploy the [manifest](neko.yaml) packaged with STUNner.
-
-Configure STUNner to act as a STUN server towards clients, and to let media reach the media server.
+First, configure STUNner to act as a TURN server towards clients, and to let media reach the media server.
 
 ```console
 git clone https://github.com/l7mp/stunner
 cd stunner/docs/examples/neko
+
 kubectl apply -f stunner.yaml
 ```
 
@@ -43,7 +42,9 @@ STUNNERIP=$(kubectl get service udp-gateway -n default -o jsonpath='{.status.loa
 > [!NOTE]
 > This IP should be accessible from your browser. If that "public IP" is behind a NAT, you can overwrite it with the actual public IP that routes to the service by hand (e.g. `STUNNERIP=<your public IP>`).
 
-We need to give this public IP the Neko configuration in the `NEKO_ICESERVERS` environment variable, inside the `json` content (basically this will tell you browser to use STUNner as a STUN/TURN server).
+### Setup Neko
+
+We need to set the STUNner public IP in the Neko configuration file under the `NEKO_ICESERVERS` environment variable, which is inside the `json` content. This will tell you browser to use STUNner as a STUN/TURN server.
 You can do that by hand, or by this fancy `sed` command:
 ```console
 sed -i "s/turn:[\.0-9]*:3478/turn:$STUNNERIP:3478/g" neko.yaml