diff --git a/4-architecture.md b/4-architecture.md index 3d5344924..daf87ae16 100644 --- a/4-architecture.md +++ b/4-architecture.md @@ -91,7 +91,9 @@ Follows [IPRS spec](/IPRS.md). ### 4.4.1 mDNS-discovery -mDNS-discovery is a Discovery Protocol that uses [mDNS](https://en.wikipedia.org/wiki/Multicast_DNS) over local area networks. It emits mDNS beacons to find if there are more peers available. Local area network peers are very useful to peer-to-peer protocols, because of their low latency links. +mDNS-discovery is a Discovery Protocol that uses [mDNS](https://en.wikipedia.org/wiki/Multicast_DNS) over local area networks with zero configuration. Local area network peers are very useful to peer-to-peer protocols, because of their low latency links. + +The [mDNS-discovery](discovery/mdns.md) specification describes how to use mDNS to discover other peers. mDNS-discovery is a standalone protocol and does not depend on any other `libp2p` protocol. mDNS-discovery can yield peers available in the local area network, without relying on other infrastructure. This is particularly useful in intranets, networks disconnected from the Internet backbone, and networks which temporarily lose links. diff --git a/discovery/mdns.md b/discovery/mdns.md new file mode 100644 index 000000000..4f8a014d7 --- /dev/null +++ b/discovery/mdns.md @@ -0,0 +1,131 @@ +# Multicast DNS (mDNS) + +Author: Richard Schneider (makaretu@gmail.com) + +## Overview + +The goal is to allow peers to discover each other when on the same local network with zero configuration. mDNS uses a multicast system of DNS records; this allows all peers on the local network to see all query responses. + +Conceptually, it is very simple. When a peer starts (or detects a network change), it sends a query for all peers. As responses come in, the peer adds the other peers' information into its local database of peers. + +## Definitions + +- `service-name` is the DNS Service Discovery (DNS-SD) service name for all peers. It is defined as `_p2p._udp.local`. +- `host-name` is the fully qualified name of the peer. It is derived from the peer's name and `p2p.local`. +- `peer-name` is the case-insensitive unique identifier of the peer, and is less than 64 characters. It is normally the base-32 encoding of the peer's ID. + + If the encoding of the peer's ID exceeds 63 characters, then the [Split at 63rd character](https://github.com/ipfs/in-web-browsers/issues/89#issue-341357014) workaround can be used. + +If a [private network](https://github.com/libp2p/specs/blob/master/pnet/Private-Networks-PSK-V1.md) is in use, then the `service-name` contains the base-16 encoding of the network's fingerprint as in `_p2p-X._udp.local`. +The prevents public and private networks from discovering each other's peers. + +## Peer Discovery + +### Request + +To find all peers, a DNS message is sent with the question `_p2p._udp.local PTR`. Peers will then start responding with their details. + +Note that a peer must respond to its own query. This allows other peers to passively discover it. + +### Response + +On receipt of a `find all peers` query, a peer sends a DNS response message (QR = 1) that contains the **answer** + +``` + PTR . +``` + +The **additional records** of the response contain the peer's discovery details: + +``` +. TXT "dnsaddr=..." +``` + +The TXT record contains the multiaddresses that the peer is listening on. Each multiaddress is a TXT attribute with the form `dnsaddr=/.../p2p/QmId`. Multiple `dnsaddr` attributes and/or TXT records are allowed. + +## DNS Service Discovery + +DNS-SD support is not needed for peers to discover each other. However, it is extremely useful for network administrators to discover what is running on the network. + +### Meta Query + +This allows discovery of all services. The question is `_services._dns-sd._udp.local PTR`. + +A peer responds with the answer + +``` + _services._dns-sd._udp.local PTR +``` + +### Find All Response + +On receipt of a `find all peers` query, the following **additional records** should be included + +``` + . SRV ... + A + AAAA +``` + +### Gotchas + +Many existing tools ignore the Additional Records, and always send individual queries for the peer's discovery details. To accomodate this, a peer should respond to the following queries: + +- `. SRV` +- `. TXT` +- ` A` +- ` AAAA` + +## Issues + +[ ] mDNS requires link-local addresses. Loopback and "NAT busting" addresses should not sent and must be ignored on receipt? + +## References + +- [RFC 1035 - Domain Names (DNS)](https://tools.ietf.org/html/rfc1035) +- [RFC 6762 - Multicast DNS](https://tools.ietf.org/html/rfc6762) +- [RFC 6763 - DNS-Based Service Discovery](https://tools.ietf.org/html/rfc6763) +- [Multiaddr](https://github.com/multiformats/multiaddr) + +## Worked Examples + +Asumming that `peer-id` is `QmQusTXc1Z9C1mzxsqC9ZTFXCgSkpBRGgW4Jk2QYHxKE22`, then the `peer-name` is `ciqcmoputolsfsigvm7nx5fwkko2eq26h46qhbj6o4co7uyn2f2srdy` (base32 encoding of the peer ID). + +To make the examples more readable `id` and `name` are used. + +### Meta Query + +Goal: find all services on the local network. + +#### Question + +``` +_services._dns-sd._udp.local PTR +``` + +#### Answer + +``` +_services._dns-sd._udp.local IN PTR _p2p._udp.local +``` + +### Find All Peers + +Goal: find all peers on the local network. + +#### Question + +``` +_p2p._udp.local PTR +``` + +#### Answer + +``` +_p2p._udp.local IN PTR `name`._p2p._udp.local +``` + +#### Additional Records + +- `name`._p2p._udp.local IN TXT dnsaddr=/ip6/fe80::7573:b0a8:46b0:bfea/tcp/4001/ipfs/`id` +- `name`._p2p._udp.local IN TXT dnsaddr=/ip4/192.168.178.21/tcp/4001/ipfs/'id'