diff --git a/02-peer-protocol.md b/02-peer-protocol.md index f61bd3cca..39bc730fc 100644 --- a/02-peer-protocol.md +++ b/02-peer-protocol.md @@ -382,10 +382,14 @@ This message introduces the `channel_id` to identify the channel. It's derived f #### Requirements Both peers: - - if `option_static_remotekey` or `option_anchor_outputs` was negotiated: - - `option_static_remotekey` or `option_anchor_outputs` applies to all commitment transactions + - if `option_static_remotekey`, `option_anchor_outputs` or + `option_anchors_zero_fee_htlc_tx` was negotiated: + - `option_static_remotekey`, `option_anchor_outputs` or + `option_anchors_zero_fee_htlc_tx` applies to all commitment transactions - otherwise: - - `option_static_remotekey` or `option_anchor_outputs` does not apply to any commitment transactions + - `option_static_remotekey`, `option_anchor_outputs` or + `option_anchors_zero_fee_htlc_tx` does not apply to any commitment + transactions The sender MUST set: - `channel_id` by exclusive-OR of the `funding_txid` and the `funding_output_index` from the `funding_created` message. @@ -400,10 +404,19 @@ The recipient: #### Rationale -We decide on `option_static_remotekey` or `option_anchor_outputs` at this point when we first have to generate the commitment -transaction. The feature bits that were communicated in the `init` message exchange for the current connection determine -the channel commitment format for the total lifetime of the channel. Even if a later reconnection does not negotiate this parameter, -this channel will continue to use `option_static_remotekey` or `option_anchor_outputs`; we don't support "downgrading". +We decide on `option_static_remotekey`, `option_anchor_outputs` or +`option_anchors_zero_fee_htlc_tx` at this point when we first have to generate +the commitment transaction. The feature bits that were communicated in the +`init` message exchange for the current connection determine the channel +commitment format for the total lifetime of the channel. Even if a later +reconnection does not negotiate this parameter, this channel will continue to +use `option_static_remotekey`, `option_anchor_outputs` or +`option_anchors_zero_fee_htlc_tx`; we don't support "downgrading". + +`option_anchors_zero_fee_htlc_tx` is considered superior to +`option_anchor_outputs`, which again is considered superior to +`option_static_remotekey`, and the superior one is is favored if more than one +is negotiated. ### The `funding_locked` Message @@ -825,7 +838,7 @@ A sending node: transaction, it cannot pay the fee for either the local or remote commitment transaction at the current `feerate_per_kw` while maintaining its channel reserve (see [Updating Fees](#updating-fees-update_fee)). - - if `option_anchor_outputs` applies to this commitment transaction and the sending + - if `option_anchors` applies to this commitment transaction and the sending node is the funder: - MUST be able to additionally pay for `to_local_anchor` and `to_remote_anchor` above its reserve. @@ -1042,9 +1055,13 @@ offline until after sending `commitment_signed`. Once those HTLCs, and cannot fail the related incoming HTLCs until the output HTLCs are fully resolved. -Note that the `htlc_signature` implicitly enforces the time-lock mechanism in the case of offered HTLCs being timed out or received HTLCs being spent. This is done to reduce fees by creating smaller scripts compared to explicitly stating time-locks on HTLC outputs. +Note that the `htlc_signature` implicitly enforces the time-lock mechanism in +the case of offered HTLCs being timed out or received HTLCs being spent. This +is done to reduce fees by creating smaller scripts compared to explicitly +stating time-locks on HTLC outputs. -The `option_anchor_outputs` allows HTLC transactions to "bring their own fees" by attaching other inputs and outputs, hence the modified signature flags. +The `option_anchors` allows HTLC transactions to "bring their own fees" by +attaching other inputs and outputs, hence the modified signature flags. ### Completing the Transition to the Updated State: `revoke_and_ack` @@ -1131,10 +1148,10 @@ A receiving node: #### Rationale Bitcoin fees are required for unilateral closes to be effective. -With `option_anchor_outputs`, `feerate_per_kw` is not as critical anymore to -guarantee confirmation as it was in the legacy commitment format, but it still -needs to be enough to be able to enter the mempool (satisfy min relay fee and -mempool min fee). +With `option_anchors`, `feerate_per_kw` is not as critical anymore to guarantee +confirmation as it was in the legacy commitment format, but it still needs to +be enough to be able to enter the mempool (satisfy min relay fee and mempool +min fee). For the legacy commitment format, there is no general method for the broadcasting node to use child-pays-for-parent to increase its effective fee. @@ -1225,7 +1242,8 @@ The sending node: next `commitment_signed` it expects to receive. - MUST set `next_revocation_number` to the commitment number of the next `revoke_and_ack` message it expects to receive. - - if `option_static_remotekey` applies to the commitment transaction: + - if `option_static_remotekey` or `option_anchors` applies to the commitment + transaction: - MUST set `my_current_per_commitment_point` to a valid point. - otherwise: - MUST set `my_current_per_commitment_point` to its commitment point for @@ -1272,7 +1290,8 @@ A node: - SHOULD fail the channel. A receiving node: - - if `option_static_remotekey` applies to the commitment transaction: + - if `option_static_remotekey` or `option_anchors` applies to the commitment + transaction: - if `next_revocation_number` is greater than expected above, AND `your_last_per_commitment_secret` is correct for that `next_revocation_number` minus 1: diff --git a/03-transactions.md b/03-transactions.md index 92aa89301..d1bb2f396 100644 --- a/03-transactions.md +++ b/03-transactions.md @@ -124,7 +124,7 @@ If a revoked commitment transaction is published, the other party can spend this #### `to_remote` Output -If `option_anchor_outputs` applies to the commitment transaction, the `to_remote` output is encumbered by a one block csv lock. +If `option_anchors` applies to the commitment transaction, the `to_remote` output is encumbered by a one block csv lock. OP_CHECKSIGVERIFY 1 OP_CHECKSEQUENCEVERIFY @@ -134,7 +134,7 @@ The output is spent by an input with `nSequence` field set to `1` and witness: Otherwise, this output is a simple P2WPKH to `remotepubkey`. -#### `to_local_anchor` and `to_remote_anchor` Output (option_anchor_outputs) +#### `to_local_anchor` and `to_remote_anchor` Output (option_anchors) This output can be spent by the local and remote nodes respectively to provide incentive to mine the transaction, using child-pays-for-parent. Both anchor outputs are always added, except for the case where there are no htlcs and one of the parties has a commitment output that is below the dust limit. @@ -166,7 +166,7 @@ After 16 blocks, anyone can sweep the anchor with witness: #### Offered HTLC Outputs -This output sends funds to either an HTLC-timeout transaction after the HTLC-timeout or to the remote node using the payment preimage or the revocation key. The output is a P2WSH, with a witness script (no option_anchor_outputs): +This output sends funds to either an HTLC-timeout transaction after the HTLC-timeout or to the remote node using the payment preimage or the revocation key. The output is a P2WSH, with a witness script (no option_anchors): # To remote node with revocation key OP_DUP OP_HASH160 OP_EQUAL @@ -184,7 +184,7 @@ This output sends funds to either an HTLC-timeout transaction after the HTLC-tim OP_ENDIF OP_ENDIF -Or, with `option_anchor_outputs`: +Or, with `option_anchors`: # To remote node with revocation key OP_DUP OP_HASH160 OP_EQUAL @@ -207,7 +207,7 @@ The remote node can redeem the HTLC with the witness: -Note that if `option_anchor_outputs` applies, the nSequence field of +Note that if `option_anchors` applies, the nSequence field of the spending input must be `1`. If a revoked commitment transaction is published, the remote node can spend this output immediately with the following witness: @@ -218,7 +218,7 @@ The sending node can use the HTLC-timeout transaction to timeout the HTLC once t #### Received HTLC Outputs -This output sends funds to either the remote node after the HTLC-timeout or using the revocation key, or to an HTLC-success transaction with a successful payment preimage. The output is a P2WSH, with a witness script (no `option_anchor_outputs`): +This output sends funds to either the remote node after the HTLC-timeout or using the revocation key, or to an HTLC-success transaction with a successful payment preimage. The output is a P2WSH, with a witness script (no `option_anchors`): # To remote node with revocation key OP_DUP OP_HASH160 OP_EQUAL @@ -237,7 +237,7 @@ This output sends funds to either the remote node after the HTLC-timeout or usin OP_ENDIF OP_ENDIF -Or, with `option_anchor_outputs`: +Or, with `option_anchors`: # To remote node with revocation key OP_DUP OP_HASH160 OP_EQUAL @@ -261,7 +261,7 @@ To timeout the HTLC, the remote node spends it with the witness: <> -Note that if `option_anchor_outputs` applies, the nSequence field of +Note that if `option_anchors` applies, the nSequence field of the spending input must be `1`. If a revoked commitment transaction is published, the remote node can spend this output immediately with the following witness: @@ -320,13 +320,13 @@ These HTLC transactions are almost identical, except the HTLC-timeout transactio * locktime: `0` for HTLC-success, `cltv_expiry` for HTLC-timeout * txin count: 1 * `txin[0]` outpoint: `txid` of the commitment transaction and `output_index` of the matching HTLC output for the HTLC transaction - * `txin[0]` sequence: `0` (set to `1` for `option_anchor_outputs`) + * `txin[0]` sequence: `0` (set to `1` for `option_anchors`) * `txin[0]` script bytes: `0` * `txin[0]` witness stack: `0 ` for HTLC-success, `0 <>` for HTLC-timeout * txout count: 1 * `txout[0]` amount: the HTLC amount minus fees (see [Fee Calculation](#fee-calculation)) * `txout[0]` script: version-0 P2WSH with witness script as shown below -* if `option_anchor_outputs` applies to this commitment transaction, `SIGHASH_SINGLE|SIGHASH_ANYONECANPAY` is used. +* if `option_anchors` applies to this commitment transaction, `SIGHASH_SINGLE|SIGHASH_ANYONECANPAY` is used. The witness script for the output is: @@ -404,32 +404,36 @@ Thus, a simplified formula for *expected weight* is used, which assumes: * Signatures are 73 bytes long (the maximum length). * There are a small number of outputs (thus 1 byte to count them). * There are always both a `to_local` output and a `to_remote` output. -* (if `option_anchor_outputs`) there are always both a `to_local_anchor` and `to_remote_anchor` output. +* (if `option_anchors`) there are always both a `to_local_anchor` and `to_remote_anchor` output. This yields the following *expected weights* (details of the computation in [Appendix A](#appendix-a-expected-weights)): - Commitment weight (no option_anchor_outputs): 724 + 172 * num-untrimmed-htlc-outputs - Commitment weight (option_anchor_outputs): 1124 + 172 * num-untrimmed-htlc-outputs - HTLC-timeout weight (no option_anchor_outputs): 663 - HTLC-timeout weight (option_anchor_outputs): 666 - HTLC-success weight (no option_anchor_outputs): 703 - HTLC-success weight (option_anchor_outputs): 706 + Commitment weight (no option_anchors): 724 + 172 * num-untrimmed-htlc-outputs + Commitment weight (option_anchors): 1124 + 172 * num-untrimmed-htlc-outputs + HTLC-timeout weight (no option_anchors): 663 + HTLC-timeout weight (option_anchors): 666 + HTLC-success weight (no option_anchors): 703 + HTLC-success weight (option_anchors): 706 Note the reference to the "base fee" for a commitment transaction in the requirements below, which is what the funder pays. The actual fee may be higher than the amount calculated here, due to rounding and trimmed outputs. #### Requirements The fee for an HTLC-timeout transaction: - - MUST BE calculated to match: + - If `option_anchors_zero_fee_htlc_tx` applies: + 1. MUST BE 0. + - Otherwise, MUST BE calculated to match: 1. Multiply `feerate_per_kw` by 663 (666 if `option_anchor_outputs` applies) and divide by 1000 (rounding down). The fee for an HTLC-success transaction: + - If `option_anchors_zero_fee_htlc_tx` applies: + 1. MUST BE 0. - MUST BE calculated to match: 1. Multiply `feerate_per_kw` by 703 (706 if `option_anchor_outputs` applies) and divide by 1000 (rounding down). The base fee for a commitment transaction: - MUST be calculated to match: - 1. Start with `weight` = 724 (1124 if `option_anchor_outputs` applies). + 1. Start with `weight` = 724 (1124 if `option_anchors` applies). 2. For each committed HTLC, if that output is not trimmed as specified in [Trimmed Outputs](#trimmed-outputs), add 172 to `weight`. 3. Multiply `feerate_per_kw` by `weight`, divide by 1000 (rounding down). @@ -493,7 +497,7 @@ committed HTLCs: 1. Calculate which committed HTLCs need to be trimmed (see [Trimmed Outputs](#trimmed-outputs)). 2. Calculate the base [commitment transaction fee](#fee-calculation). 3. Subtract this base fee from the funder (either `to_local` or `to_remote`). -If `option_anchor_outputs` applies to the commitment transaction, +If `option_anchors` applies to the commitment transaction, also subtract two times the fixed anchor size of 330 sats from the funder (either `to_local` or `to_remote`). 4. For every offered HTLC, if it is not trimmed, add an @@ -504,7 +508,7 @@ also subtract two times the fixed anchor size of 330 sats from the funder add a [`to_local` output](#to_local-output). 7. If the `to_remote` amount is greater or equal to `dust_limit_satoshis`, add a [`to_remote` output](#to_remote-output). -8. If `option_anchor_outputs` applies to the commitment transaction: +8. If `option_anchors` applies to the commitment transaction: * if `to_local` exists or there are untrimmed HTLCs, add a [`to_local_anchor` output](#to_local_anchor-and-to_remote_anchor-output-option_anchor_outputs) * if `to_remote` exists or there are untrimmed HTLCs, add a [`to_remote_anchor` output](#to_local_anchor-and-to_remote_anchor-output-option_anchor_outputs) 9. Sort the outputs into [BIP 69+CLTV order](#transaction-input-and-output-ordering). @@ -516,7 +520,7 @@ also subtract two times the fixed anchor size of 330 sats from the funder Each commitment transaction uses a unique `localpubkey`, and a `remotepubkey`. The HTLC-success and HTLC-timeout transactions use `local_delayedpubkey` and `revocationpubkey`. These are changed for every transaction based on the `per_commitment_point`. -For `option_static_remotekey` and `option_anchor_outputs`, no key rotation +For `option_static_remotekey` and `option_anchors`, no key rotation is applied to `remotepubkey`. The reason for key change is so that trustless watching for revoked @@ -566,7 +570,7 @@ secrets are known (i.e. the private keys corresponding to `localpubkey`, `local_ ### `remotepubkey` Derivation -If `option_static_remotekey` or `option_anchor_outputs` is negotiated, the `remotepubkey` is simply the +If `option_static_remotekey` or `option_anchors` is negotiated, the `remotepubkey` is simply the remote node's `payment_basepoint`, otherwise it is calculated as above using the remote node's `payment_basepoint`. @@ -764,17 +768,17 @@ The *expected weight* of a commitment transaction is calculated as follows: - var_int: 1 byte (pk_script length) - pk_script (p2wsh): 34 bytes - output_paying_to_remote (no option_anchor_outputs): 31 bytes + output_paying_to_remote (no option_anchors): 31 bytes - value: 8 bytes - var_int: 1 byte (pk_script length) - pk_script (p2wpkh): 22 bytes - output_paying_to_remote (option_anchor_outputs): 43 bytes + output_paying_to_remote (option_anchors): 43 bytes - value: 8 bytes - var_int: 1 byte (pk_script length) - pk_script (p2wsh): 34 bytes - output_anchor (option_anchor_outputs): 43 bytes + output_anchor (option_anchors): 43 bytes - value: 8 bytes - var_int: 1 byte (pk_script length) - pk_script (p2wsh): 34 bytes @@ -788,7 +792,7 @@ The *expected weight* of a commitment transaction is calculated as follows: - flag: 1 byte - marker: 1 byte - commitment_transaction (no option_anchor_outputs): 125 + 43 * num-htlc-outputs bytes + commitment_transaction (no option_anchors): 125 + 43 * num-htlc-outputs bytes - version: 4 bytes - witness_header <---- part of the witness data - count_tx_in: 1 byte @@ -801,7 +805,7 @@ The *expected weight* of a commitment transaction is calculated as follows: ....htlc_output's... - lock_time: 4 bytes - commitment_transaction (option_anchor_outputs): 225 + 43 * num-htlc-outputs bytes + commitment_transaction (option_anchors): 225 + 43 * num-htlc-outputs bytes - version: 4 bytes - witness_header <---- part of the witness data - count_tx_in: 1 byte @@ -818,21 +822,21 @@ The *expected weight* of a commitment transaction is calculated as follows: Multiplying non-witness data by 4 results in a weight of: - // 500 + 172 * num-htlc-outputs weight (no option_anchor_outputs) - // 900 + 172 * num-htlc-outputs weight (option_anchor_outputs) + // 500 + 172 * num-htlc-outputs weight (no option_anchors) + // 900 + 172 * num-htlc-outputs weight (option_anchors) commitment_transaction_weight = 4 * commitment_transaction // 224 weight witness_weight = witness_header + witness - overall_weight (no option_anchor_outputs) = 500 + 172 * num-htlc-outputs + 224 weight - overall_weight (option_anchor_outputs) = 900 + 172 * num-htlc-outputs + 224 weight + overall_weight (no option_anchors) = 500 + 172 * num-htlc-outputs + 224 weight + overall_weight (option_anchors) = 900 + 172 * num-htlc-outputs + 224 weight ## Expected Weight of HTLC-timeout and HTLC-success Transactions The *expected weight* of an HTLC transaction is calculated as follows: - accepted_htlc_script: 140 bytes (143 bytes with option_anchor_outputs) + accepted_htlc_script: 140 bytes (143 bytes with option_anchors) - OP_DUP: 1 byte - OP_HASH160: 1 byte - OP_DATA: 1 byte (RIPEMD160(SHA256(revocationpubkey)) length) @@ -867,12 +871,12 @@ The *expected weight* of an HTLC transaction is calculated as follows: - OP_DROP: 1 byte - OP_CHECKSIG: 1 byte - OP_ENDIF: 1 byte - - OP_1: 1 byte (option_anchor_outputs) - - OP_CHECKSEQUENCEVERIFY: 1 byte (option_anchor_outputs) - - OP_DROP: 1 byte (option_anchor_outputs) + - OP_1: 1 byte (option_anchors) + - OP_CHECKSEQUENCEVERIFY: 1 byte (option_anchors) + - OP_DROP: 1 byte (option_anchors) - OP_ENDIF: 1 byte - offered_htlc_script: 133 bytes (136 bytes with option_anchor_outputs) + offered_htlc_script: 133 bytes (136 bytes with option_anchors) - OP_DUP: 1 byte - OP_HASH160: 1 byte - OP_DATA: 1 byte (RIPEMD160(SHA256(revocationpubkey)) length) @@ -903,12 +907,12 @@ The *expected weight* of an HTLC transaction is calculated as follows: - OP_EQUALVERIFY: 1 byte - OP_CHECKSIG: 1 byte - OP_ENDIF: 1 byte - - OP_1: 1 byte (option_anchor_outputs) - - OP_CHECKSEQUENCEVERIFY: 1 byte (option_anchor_outputs) - - OP_DROP: 1 byte (option_anchor_outputs) + - OP_1: 1 byte (option_anchors) + - OP_CHECKSEQUENCEVERIFY: 1 byte (option_anchors) + - OP_DROP: 1 byte (option_anchors) - OP_ENDIF: 1 byte - timeout_witness: 285 bytes (288 bytes with option_anchor_outputs) + timeout_witness: 285 bytes (288 bytes with option_anchors) - number_of_witness_elements: 1 byte - nil_length: 1 byte - sig_alice_length: 1 byte @@ -919,7 +923,7 @@ The *expected weight* of an HTLC transaction is calculated as follows: - witness_script_length: 1 byte - witness_script (offered_htlc_script) - success_witness: 324 bytes (327 bytes with option_anchor_outputs) + success_witness: 324 bytes (327 bytes with option_anchors) - number_of_witness_elements: 1 byte - nil_length: 1 byte - sig_alice_length: 1 byte @@ -960,8 +964,8 @@ Multiplying non-witness data by 4 results in a weight of 376. Adding the witness data for each case (285 or 288 + 2 for HTLC-timeout, 324 or 327 + 2 for HTLC-success) results in weights of: - 663 (HTLC-timeout) (666 with option_anchor_outputs)) - 703 (HTLC-success) (706 with option_anchor_outputs)) + 663 (HTLC-timeout) (666 with option_anchors)) + 703 (HTLC-success) (706 with option_anchors)) - (really 702 and 705, but we use these numbers for historical reasons) # Appendix B: Funding Transaction Test Vectors diff --git a/05-onchain.md b/05-onchain.md index d1d6a757c..98c737926 100644 --- a/05-onchain.md +++ b/05-onchain.md @@ -163,7 +163,7 @@ need not consume resources monitoring the channel state. There exists a bias towards preferring mutual closes over unilateral closes, because outputs of the former are unencumbered by a delay and are directly spendable by wallets. In addition, mutual close fees tend to be less exaggerated -than those of commitment transactions (or in the case of `option_anchor_outputs`, +than those of commitment transactions (or in the case of `option_anchors`, the commitment transaction may require a child transaction to cause it to be mined). So, the only reason not to use the signature from `closing_signed` would be if the fee offered was too small for it to be processed. @@ -514,7 +514,7 @@ A local node: using the revocation private key. - SHOULD extract the payment preimage from the transaction input witness, if it's not already known. - - if `option_anchor_outputs` applies: + - if `option_anchors` applies: - MAY use a single transaction to *resolve* all the outputs. - if confirmation doesn't happen before reaching `security_delay` blocks from expiry: @@ -531,7 +531,7 @@ A single transaction that resolves all the outputs will be under the standard size limit because of the 483 HTLC-per-party limit (see [BOLT #2](02-peer-protocol.md#the-open_channel-message)). -Note: if `option_anchor_outputs` applies, the cheating node can pin spends of its +Note: if `option_anchors` applies, the cheating node can pin spends of its HTLC-timeout/HTLC-success outputs thanks to SIGHASH_SINGLE malleability. Using a single penalty transaction for all revoked outputs is thus unsafe as it could be blocked to propagate long enough for the _local node's `to_local` output_ 's @@ -587,16 +587,37 @@ Note: even if the `to_remote` output is not swept, the resulting # Generation of HTLC Transactions -If `option_anchor_outputs` does not apply to the commitment transaction, then HTLC-timeout and HTLC-success transactions are complete transactions with (hopefully!) reasonable fees and must be used directly. +If `option_anchors` does not apply to the commitment transaction, then +HTLC-timeout and HTLC-success transactions are complete transactions with +(hopefully!) reasonable fees and must be used directly. -Otherwise, the use of `SIGHASH_SINGLE|SIGHASH_ANYONECANPAY` on the HTLC signatures received from the peer allows HTLC transactions to be combined with other transactions. -The local signature MUST use `SIGHASH_ALL`, otherwise anyone can attach additional inputs and outputs to the tx. +Otherwise, the use of `SIGHASH_SINGLE|SIGHASH_ANYONECANPAY` on the HTLC +signatures received from the peer allows HTLC transactions to be combined with +other transactions. The local signature MUST use `SIGHASH_ALL`, otherwise +anyone can attach additional inputs and outputs to the tx. + +If `option_anchors_zero_fee_htlc_tx` applies, then the HTLC-timeout and +HTLC-success transactions are signed with the input and output having the same +value. This means they have a zero fee and MUST be combined with other inputs +to arrive at a reasonable fee. ## Requirements -A node which broadcasts an HTLC-success or HTLC-timeout transaction for a commitment transaction for which `option_anchor_outputs` applies: - - MUST contribute sufficient fee to ensure timely inclusion in a block. - - MAY combine it with other transactions. +A node which broadcasts an HTLC-success or HTLC-timeout transaction for a +commitment transaction: + 1. if `option_anchor_outputs` applies: + - SHOULD combine it with inputs contributing sufficient fee to ensure + timely inclusion in a block. + - MAY combine it with other transactions. + 2. if `option_anchors_zero_fee_htlc_tx` applies: + - MUST combine it with inputs contributing sufficient fee to ensure timely + inclusion in a block. + - MAY combine it with other transactions. + +Note that `option_anchors_zero_fee_htlc_tx` has a stronger requirement for +adding inputs to the final transactions than `option_anchor_outputs`, since the +HTLC-success and HTLC-timeout transactions won't propagate without additional +inputs added. # General Requirements diff --git a/09-features.md b/09-features.md index b508bac70..54cd2de6e 100644 --- a/09-features.md +++ b/09-features.md @@ -42,6 +42,10 @@ The Context column decodes as follows: | 22/23 | `option_anchors_zero_fee_htlc_tx` | Anchor commitment type with zero fee HTLC transactions | IN | | [BOLT #3][bolt03-htlc-tx], [lightning-dev][ml-sighash-single-harmful]| | 26/27 | `option_shutdown_anysegwit` | Future segwit versions allowed in `shutdown` | IN | | [BOLT #2][bolt02-shutdown] | +## Definitions + +We define `option_anchors` as `option_anchor_outputs || option_anchors_zero_fee_htlc_tx`. + ## Requirements The origin node: