Skip to content

Latest commit

 

History

History
405 lines (334 loc) · 17.1 KB

GettingStarted.md

File metadata and controls

405 lines (334 loc) · 17.1 KB
Raw

Getting Started with the CIRCT Project

Overview

Welcome to the CIRCT project!

"CIRCT" stands for "Circuit IR Compilers and Tools". The CIRCT project is an (experimental!) effort looking to apply MLIR and the LLVM development methodology to the domain of hardware design tools.

Take a look at the following diagram, which gives a brief overview of the current dialects and how they interact:

Setting this up

These commands can be used to setup CIRCT project:

  1. Install Dependencies of LLVM/MLIR according to the instructions, including cmake and ninja.

Note: CIRCT is known to build with at least GCC 9.4 and Clang 13.0.1, but older versions may not be supported. It is recommended to use the same C++ toolchain to compile both LLVM and CIRCT to avoid potential issues.

Recommendation: In order to greatly reduce memory usage during linking, we recommend using the LLVM linker lld.

If you plan to use the Python bindings, you should start by reading the instructions for building the MLIR Python bindings, which describe extra dependencies, CMake variables, and helpful Python development practices. Note the extra CMake variables, which you will need to specify in step 3) below.

  1. Check out LLVM and CIRCT repos. CIRCT contains LLVM as a git submodule. The LLVM repo here includes staged changes to MLIR which may be necessary to support CIRCT. It also represents the version of LLVM that has been tested. MLIR is still changing relatively rapidly, so feel free to use the current version of LLVM, but APIs may have changed.
$ git clone git@github.com:circt/circt.git
$ cd circt
$ git submodule init
$ git submodule update

Note: The repository is set up so that git submodule update performs a shallow clone, meaning it downloads just enough of the LLVM repository to check out the currently specified commit. If you wish to work with the full history of the LLVM repository, you can manually "unshallow" the submodule:

$ cd llvm
$ git fetch --unshallow
  1. Build and test LLVM/MLIR:
$ cd circt
$ mkdir llvm/build
$ cd llvm/build
$ cmake -G Ninja ../llvm \
    -DLLVM_ENABLE_PROJECTS="mlir" \
    -DLLVM_TARGETS_TO_BUILD="host" \
    -DLLVM_ENABLE_ASSERTIONS=ON \
    -DCMAKE_BUILD_TYPE=DEBUG \
    -DLLVM_USE_SPLIT_DWARF=ON \
    -DLLVM_ENABLE_LLD=ON  
$ ninja
$ ninja check-mlir
  1. Build and test CIRCT:
$ cd circt
$ mkdir build
$ cd build
$ cmake -G Ninja .. \
    -DMLIR_DIR=$PWD/../llvm/build/lib/cmake/mlir \
    -DLLVM_DIR=$PWD/../llvm/build/lib/cmake/llvm \
    -DLLVM_ENABLE_ASSERTIONS=ON \
    -DCMAKE_BUILD_TYPE=DEBUG \
    -DLLVM_USE_SPLIT_DWARF=ON \
    -DLLVM_ENABLE_LLD=ON  
$ ninja
$ ninja check-circt
$ ninja check-circt-integration # Run the integration tests.

In order to use the recommended lld linker, use the -DLLVM_ENABLE_LLD=ON. Removing that flag will use your compiler's default linker. More details about these problems and their solutions can be found in the LLVM docs.

The -DCMAKE_BUILD_TYPE=DEBUG flag enables debug information, which makes the whole tree compile slower, but allows you to step through code into the LLVM and MLIR frameworks.

To get something that runs fast, use -DCMAKE_BUILD_TYPE=Release or -DCMAKE_BUILD_TYPE=RelWithDebInfo if you want to go fast and optionally if you want debug info to go with it. Release mode makes a very large difference in performance.

If you plan to use the Python bindings, you should also specify -DCIRCT_BINDINGS_PYTHON_ENABLED=ON.

  1. Optionally configure your environment:

It is useful to add the .../circt/build/bin and .../circt/llvm/build/bin directories to the end of your PATH, allowing you to use the tools like circt-opt in a natural way on the command line. Similarly, you need to be in the build directory to invoke ninja, which is super annoying. You might find a bash/zsh alias like this to be useful:

build() {
  (cd $HOME/Projects/circt/build/; ninja $1 $2 $3)
}

This allows you to invoke build check-circt from any directory and have it do the right thing.

  1. Run the Verilator tests: (optional)

Verilator can be used to check SystemVerilog code. To run the tests, build or install a recent version of Verilator (at least v4.034, ideally v4.110 or later to avoid a known bug). (Some Linux distributions have ancient versions.) If Verilator is in your PATH, build check-circt should run the tests which require Verilator.

We provide a script utils/get-verilator.sh to automate the download and compilation of Verilator into a known location. The testing script will check this location first. This script assumes that all the Verilator package dependencies are installed on your system. They are:

  • make
  • autoconf
  • g++
  • flex
  • bison
  • libfl2 # Ubuntu only (ignore if gives error)
  • libfl-dev # Ubuntu only (ignore if gives error)
  1. Install GRPC (optional, affects ESI runtime only)

The ESI runtime requires GRPC for cosimulation. The utils/get-grpc.sh script installs a known good version of GRPC to a directory within the CIRCT source code. Alternatively, you can install GRPC using your package manager, though the version may not be compatible with the ESI runtime so results may vary.

  1. Install OR-Tools (optional, enables additional schedulers)

OR-Tools is an open source software suite for (mathematical) optimization. It provides a uniform interface to several open-source and commercial solvers, e.g. for linear programs and satisfiability problems. Here, it is optionally used in the static scheduling infrastructure. Binary distributions often do not include the required CMake build info. The utils/get-or-tools.sh script downloads, compiles, and installs a known good version to a directory within the CIRCT source code,

Setting up VS Code Workspace

We've provided an example VS Code file in .vscode/Unified.code-workspace.jsonc that can be used with the VS Code editor. To use the file, first copy to into a workspace file:

cp .vscode/Unified.code-workspace.jsonc .vscode/circt.code-workspace

Next, open the workspace file in VS code using the command palette (Ctrl + Shift + P) and selecting "Open workspace from file" and selecting the .vscode/circt.code-workspace file.

Alternatively, open the file using:

code .vscode/circt.code-workspace

and select "open workspace" on the bottom right.

Once the workspace is loaded, install the recommended tools and select "CMake: Build" from the command palette to start the unified build process. This will build the LLVM dependencies and CIRCT together.

where it is then picked up automatically by the build.

Windows: notes on setting up with Ninja

Building on Windows using MSVC + Ninja + Python support is straight forward, though full of landmines. Here are some notes:

  • Ninja and cmake must be run in a VS Developer Command shell. If you use Powershell and don't want to start the VS GUI, you can run:
> $vsPath = &(Join-Path ${env:ProgramFiles(x86)} "\Microsoft Visual Studio\Installer\vswhere.exe") -property installationpath
> Import-Module (Get-ChildItem $vsPath -Recurse -File -Filter Microsoft.VisualStudio.DevShell.dll).FullName
> Enter-VsDevShell -VsInstallPath $vsPath -SkipAutomaticLocation
  • VSCode's cmake configure does not operate properly with Python support. The symptom is that the build will complete, but importing circt or mlir crashes Python. Doing everything from the command line is the only way CIRCT compiles have been made to work.

Cheat sheet for powershell:

# Install cmake, ninja, and Visual Studio
> python -m pip install psutil pyyaml numpy pybind11

> $vsPath = &(Join-Path ${env:ProgramFiles(x86)} "\Microsoft Visual Studio\Installer\vswhere.exe") -property installationpath
> Import-Module (Get-ChildItem $vsPath -Recurse -File -Filter Microsoft.VisualStudio.DevShell.dll).FullName
> Enter-VsDevShell -VsInstallPath $vsPath -SkipAutomaticLocation

> cd <circt clone>
> cmake -B<build_dir> llvm/llvm `
    -GNinja `
    -DLLVM_ENABLE_PROJECTS=mlir `
    -DCMAKE_BUILD_TYPE=Debug `
    -DLLVM_TARGETS_TO_BUILD=X86 `
    -DLLVM_ENABLE_ASSERTIONS=ON `
    -DMLIR_ENABLE_BINDINGS_PYTHON=ON `
    -DLLVM_EXTERNAL_PROJECTS=circt `
    -DLLVM_EXTERNAL_CIRCT_SOURCE_DIR="$(PWD)" `
    -DCIRCT_BINDINGS_PYTHON_ENABLED=ON `
    -DCMAKE_EXPORT_COMPILE_COMMANDS=ON
    -DLLVM_USE_SPLIT_DWARF=ON 
    -DLLVM_ENABLE_LLD=ON
> ninja -C<build_dir> check-circt

Submitting changes to CIRCT

The project is small so there are few formal process yet. We generally follow the LLVM and MLIR community practices, but we currently use pull requests and GitHub issues. Here are some high-level guidelines:

  • Please use clang-format in the LLVM style. There are good plugins for common editors like VSCode, Atom, etc, or you can run it manually. This makes code easier to read and understand.

  • Beyond mechanical formatting issues, please follow the LLVM Coding Standards.

  • Please practice "incremental development", preferring to send a small series of incremental patches rather than large patches. There are other policies in the LLVM Developer Policy document that are worth skimming.

  • Please use "Squash and Merge" in PRs when they are approved - we don't need the intra-change history in the repository history.

  • Please create a PR to get a code review. For reviewers, it is good to look at the primary author of the code you are touching to make sure they are at least CC'd on the PR.

Submitting changes to LLVM / MLIR

This project depends on MLIR and LLVM, and it is occasionally useful to improve them. To get set up for this:

  1. Follow the "How to Contribute" instructions, and install the right tools, e.g. clang-format.
  2. Optional: Ask for LLVM commit access, the barrier is low. Alternatively, you can ask one of the reviewers on the GitHub pull-request to merge for you.

Submitting a patch

Patches are submitted to LLVM/MLIR via GitHub pull-requests, the basic flow is as follows:

  1. Check out the LLVM mono repo (as described above) or your fork of the same.
  2. Make changes to your codebase in a dedicated branch for your patch.
  3. Stage your changes with git add.
  4. Run clang-format to tidy up the patch with git clang-format origin/main.
  5. Run tests with ninja check-mlir (or whatever other target makes sense).
  6. Publish the branch on your fork of the repository and create a GitHub pull-request.

When your review converges and your patch is approved, it can be merged directly on GitHub. If you have commit access, you can do this yourself, otherwise a reviewer can do it for you.

Writing a basic CIRCT Pass

Passes can be added at several levels in CIRCT. Here we illustrate this with a simple pass, targetting the hw dialect, that replaces all of the wire names with `foo. This example is very basic and is meant for people who want to get a quick and dirty start at writing passes for CIRCT. For more detailed tutorials, we recommend looking at the MLIR docs, and their Toy tutorials.
To add a simple dialect pass, that doesn't perform any dialect conversion, you can do the following:

  1. Update your dialect’s Passes.td file to define what your pass will do in a high-level, well documented way, e.g. in include/circt/Dialect/HW/Passes.td:
def FooWires : Pass<"hw-foo-wires", "hw::HwModuleOp"> {
  let summary = "Change all wires' name to foo_<n>.";
  let description = [{
    Very basic pass that numbers all of the wires in a given module.
    The wires' names are then all converte to foo_<that number>.
  }];
  let constructor = "circt::hw::createFooWiresPass()";
}

Once this is added, compile CIRCT. This will generate a base class for your pass following the naming defined in the tablegen description. This base class will contain some methods that need to be implemented. Your goal is to now implement those.

  1. Create a new file that contains your pass in the dialect's pass folder, e.g. in lib/Dialect/HW/Transforms. Don't forget to also add it in the folder's CMakeLists.txt. This file should implement:
  • A struct with the name of your pass, which extends the pass base class generated by the tablegen description.
  • This struct should define an override of the void runOnOperation() method, e.g.
namespace {
  // A test pass that simply replaces all wire names with foo_<n>
  struct FooWiresPass : FooWiresBase<FooWiresPass> {
    void runOnOperation() override;
  };
}
  • The runOnOperation method will contain the actual logic of your pass, which you can now implement, e.g.
void FooWiresPass::runOnOperation() {
  size_t nWires = 0; // Counts the number of wires modified
  getOperation().walk([&](hw::WireOp wire) { // Walk over every wire in the module
    wire.setName("foo_" + std::to_string(nWires++)); // Rename said wire
  });
}

Note: Here getOperation().walk([&](WireOp wire) { ... }); is used to traverse every wire in the design, you can also use it to generically walk over all operations and then visit them individually using a visitor pattern by overloading type visitors defined by each dialect. More details can be found in the MLIR docs, e.g.

#include "circt/Dialect/HW/HWVisitors.h" // defines dispatchTypeOpVisitor which calls visit(op)

namespace {
  // A test pass that simply replaces all wire names with foo_<n>
  struct VisitorExamplePass 
    : public VisitorExampleBase<VisitorExamplePass>,
      public hw::TypeOpVisitor<VisitorExamplePass> // Allows for the visitor overloads to be added
  {
  public:  
    void runOnOperation() override;

    // Vistor overloads
    void visitTypeOp(hw::ConstantOp op) { /*...*/ }
    void visitTypeOp(/*other hw operations*/) { /*...*/ }
  };
}

void VisitorExamplePass::runOnOperation() {
  module.walk([&](Operation* op) { dispatchTypeOpVisitor(op); });
}
  • Finally implement the constructor for the pass, as defined in the tablegen description, e.g.
std::unique_ptr<mlir::Pass> circt::hw::createFooWiresPass() {
  return std::make_unique<FooWiresPass>();
}
  1. Define the pass constructor in the dialect's Passes.h file, e.g. in include/circt/Dialect/hw/HWPasses.h add:
std::unique_ptr<mlir::Pass> createFooWiresPass();
  1. Make sure to add a test to check your pass, e.g. in test/Dialect/HW:
// RUN: circt-opt --hw-foo-wires %s | FileCheck %s

hw.module @foo(in %a: i32, in %b: i32, out out: i32) {
  // CHECK:   %c1_i32 = hw.constant 1 : i32
  %c1 = hw.constant 1 : i32
  // CHECK:   %foo_0 = hw.wire %c1_i32  : i32
  %wire_1 = hw.wire %c1 : i32
  // CHECK:   %foo_1 = hw.wire %a  : i32
  %wire_a = hw.wire %a : i32
  // CHECK:   %foo_2 = hw.wire %b  : i32
  %wire_b = hw.wire %b : i32
  // CHECK:   %0 = comb.add bin %foo_1, %foo_0 : i32
  %ap1 = comb.add bin %wire_a, %wire_1 : i32
  // CHECK:   %foo_3 = hw.wire %0  : i32
  %wire_ap1 = hw.wire %ap1 : i32
  // CHECK:   %1 = comb.add bin %foo_3, %foo_2 : i32
  %ap1pb = comb.add bin %wire_ap1, %wire_b : i32
  // CHECK:   %foo_4 = hw.wire %1  : i32
  %wire_ap1pb = hw.wire %ap1pb : i32
  // CHECK:   hw.output %foo_4 : i32
  hw.output %wire_ap1pb : i32
}

Now re-run cmake and compile CIRCT and you should be able to run your new pass! By default, every pass is accessible using circt-opt through the name that was defined in the tablegen description, e.g. circt-opt --hw-foo-wires <file_name>.mlir. These passes can also be included in certain compilation pipelines that are well packaged in tools like firtool.
We recommend looking at recently merged Pull-Requests or other MLIR tutorials to learn how to go beyond what we've shown in this quick start guide.
The full source code of this pass is available at the following links: