settings.h

/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#ifndef SETTINGS_H
#define SETTINGS_H

#include <stdbool.h>
#include <stdint.h>

#include "frequencies.h"
#include <helper/battery.h>
#include "radio.h"
#include <driver/backlight.h>
#if ENABLE_CHINESE_FULL==4

enum POWER_OnDisplayMode_t {
    POWER_ON_DISPLAY_MODE_NONE,
    POWER_ON_DISPLAY_MODE_PIC,
    POWER_ON_DISPLAY_MODE_MESSAGE

};
typedef enum POWER_OnDisplayMode_t POWER_OnDisplayMode_t;
#endif
enum TxLockModes_t {
    F_LOCK_DEF, //all default frequencies + configurable
    F_LOCK_FCC,
    F_LOCK_CE,
    F_LOCK_GB,

    F_LOCK_ALL,	// disable TX on all frequencies
    F_LOCK_NONE, // enable TX on all frequencies
    F_LOCK_LEN
};

enum {
    SCAN_RESUME_TO = 0,
    SCAN_RESUME_CO,
    SCAN_RESUME_SE
};

enum {
    CROSS_BAND_OFF = 0,
    CROSS_BAND_CHAN_A,
    CROSS_BAND_CHAN_B
};

enum {
    DUAL_WATCH_OFF = 0,
    DUAL_WATCH_CHAN_A,
    DUAL_WATCH_CHAN_B
};

enum {
    TX_OFFSET_FREQUENCY_DIRECTION_OFF = 0,
    TX_OFFSET_FREQUENCY_DIRECTION_ADD,
    TX_OFFSET_FREQUENCY_DIRECTION_SUB
};

enum {
    OUTPUT_POWER_LOW = 0,
    OUTPUT_POWER_MID,
    OUTPUT_POWER_HIGH
};


enum ACTION_OPT_t {
    ACTION_OPT_NONE = 0,
    ACTION_OPT_FLASHLIGHT,
    ACTION_OPT_POWER,
    ACTION_OPT_MONITOR,
    ACTION_OPT_SCAN,
    ACTION_OPT_VOX,
    ACTION_OPT_ALARM,
    ACTION_OPT_FM,
    ACTION_OPT_1750,
    ACTION_OPT_KEYLOCK,
    ACTION_OPT_A_B,
    ACTION_OPT_VFO_MR,
    ACTION_OPT_SWITCH_DEMODUL,
    ACTION_OPT_BLMIN_TMP_OFF, //BackLight Minimum Temporay OFF
    ACTION_OPT_D_DCD,
    ACTION_OPT_WIDTH,
#ifdef ENABLE_SIDEFUNCTIONS_SEND
    ACTION_OPT_SEND_CURRENT,
    ACTION_OPT_SEND_OTHER,
#endif
    ACTION_OPT_LEN
};

#ifdef ENABLE_VOICE
enum VOICE_Prompt_t
	{
		VOICE_PROMPT_OFF = 0,
		VOICE_PROMPT_CHINESE,
		VOICE_PROMPT_ENGLISH
	};
	typedef enum VOICE_Prompt_t VOICE_Prompt_t;
#endif

enum ALARM_Mode_t {
    ALARM_MODE_SITE = 0,
    ALARM_MODE_TONE
};
typedef enum ALARM_Mode_t ALARM_Mode_t;

enum ROGER_Mode_t {
    ROGER_MODE_OFF = 0,
    ROGER_MODE_ROGER,
    ROGER_MODE_MDC_END,
    ROGER_MODE_MDC_HEAD,
    ROGER_MODE_MDC_BOTH,
    ROGER_MODE_MDC_HEAD_ROGER

};
typedef enum ROGER_Mode_t ROGER_Mode_t;

enum CHANNEL_DisplayMode_t {
    MDF_FREQUENCY = 0,
    MDF_CHANNEL,
    MDF_NAME,
    MDF_NAME_FREQ
};
typedef enum CHANNEL_DisplayMode_t CHANNEL_DisplayMode_t;

typedef struct {
    uint8_t               ScreenChannel[2]; // current channels set in the radio (memory or frequency channels)
    uint8_t               FreqChannel[2]; // last frequency channels used
    uint8_t               MrChannel[2]; // last memory channels used
#ifdef ENABLE_NOAA
    uint8_t           NoaaChannel[2];
#endif

    // The actual VFO index (0-upper/1-lower) that is now used for RX,
    // It is being alternated by dual watch, and flipped by crossband
    uint8_t               RX_VFO;

    // The main VFO index (0-upper/1-lower) selected by the user
    //
    uint8_t               TX_VFO;

    uint8_t               field7_0xa;
    uint8_t               field8_0xb;

#ifdef ENABLE_FMRADIO
    uint16_t          FM_SelectedFrequency;
		uint8_t           FM_SelectedChannel;
		bool              FM_IsMrMode;
		uint16_t          FM_FrequencyPlaying;
		uint16_t          FM_LowerLimit;
		uint16_t          FM_UpperLimit;
#endif

    uint8_t               SQUELCH_LEVEL;
    uint8_t               TX_TIMEOUT_TIMER;
    bool                  KEY_LOCK;
    bool                  VOX_SWITCH;
    uint8_t               VOX_LEVEL;
#ifdef ENABLE_VOICE
    VOICE_Prompt_t    VOICE_PROMPT;
#endif
    bool                  BEEP_CONTROL;
    uint8_t               CHANNEL_DISPLAY_MODE;
    bool                  TAIL_TONE_ELIMINATION;
    bool                  VFO_OPEN;
    uint8_t               DUAL_WATCH;
    uint8_t               CROSS_BAND_RX_TX;
    uint8_t               BATTERY_SAVE;
    uint8_t               BACKLIGHT_TIME;
    uint8_t               SCAN_RESUME_MODE;
    uint8_t               SCAN_LIST_DEFAULT;
    bool                  SCAN_LIST_ENABLED[2];
    uint8_t               SCANLIST_PRIORITY_CH1[2];
    uint8_t               SCANLIST_PRIORITY_CH2[2];

    uint8_t               field29_0x26;
    uint8_t               field30_0x27;

    uint8_t               field37_0x32;
    uint8_t               field38_0x33;

//    bool                  AUTO_KEYPAD_LOCK;
#if defined(ENABLE_ALARM) || defined(ENABLE_TX1750)
    ALARM_Mode_t      ALARM_MODE;
#endif
#if ENABLE_CHINESE_FULL==4
    POWER_OnDisplayMode_t POWER_ON_DISPLAY_MODE;
#endif
    ROGER_Mode_t          ROGER;
    uint8_t               REPEATER_TAIL_TONE_ELIMINATION;
#ifdef ENABLE_CUSTOM_SIDEFUNCTIONS
    uint8_t               KEY_1_SHORT_PRESS_ACTION;
    uint8_t               KEY_1_LONG_PRESS_ACTION;
    uint8_t               KEY_2_SHORT_PRESS_ACTION;
    uint8_t               KEY_2_LONG_PRESS_ACTION;
#endif
    uint8_t               MIC_SENSITIVITY;
    uint8_t               MIC_SENSITIVITY_TUNING;
    uint8_t               CHAN_1_CALL;
#ifdef ENABLE_DTMF_CALLING
    char                  ANI_DTMF_ID[8];
	char                  KILL_CODE[8];
	char                  REVIVE_CODE[8];
#endif
    char                  DTMF_UP_CODE[16];

    uint8_t               field57_0x6c;
    uint8_t               field58_0x6d;

    char                  DTMF_DOWN_CODE[16];

    uint8_t               field60_0x7e;
    uint8_t               field61_0x7f;

#ifdef ENABLE_DTMF_CALLING
    char                  DTMF_SEPARATE_CODE;
	char                  DTMF_GROUP_CALL_CODE;
	uint8_t               DTMF_DECODE_RESPONSE;
	uint8_t               DTMF_auto_reset_time;
#endif
    uint16_t              DTMF_PRELOAD_TIME;
    uint16_t              DTMF_FIRST_CODE_PERSIST_TIME;
    uint16_t              DTMF_HASH_CODE_PERSIST_TIME;
    uint16_t              DTMF_CODE_PERSIST_TIME;
    uint16_t              DTMF_CODE_INTERVAL_TIME;
    bool                  DTMF_SIDE_TONE;
#ifdef ENABLE_DTMF_CALLING
    bool                  PERMIT_REMOTE_KILL;
#endif
    int16_t               BK4819_XTAL_FREQ_LOW;
#ifdef ENABLE_NOAA
    bool              NOAA_AUTO_SCAN;
#endif
    uint8_t               VOLUME_GAIN;
    uint8_t               DAC_GAIN;

    VFO_Info_t            VfoInfo[2];
    uint32_t              POWER_ON_PASSWORD;
    uint16_t              VOX1_THRESHOLD;
    uint16_t              VOX0_THRESHOLD;

    uint8_t               field77_0x95;
    uint8_t               field78_0x96;
    uint8_t               field79_0x97;

#ifdef ENABLE_CUSTOM_SIDEFUNCTIONS
    uint8_t 			  KEY_M_LONG_PRESS_ACTION;
#endif
//    uint8_t               BACKLIGHT_MIN;
#ifdef ENABLE_BLMIN_TMP_OFF
    BLMIN_STAT_t		  BACKLIGHT_MIN_STAT;
#endif
    uint8_t               BACKLIGHT_MAX;

    BATTERY_Type_t		  BATTERY_TYPE;
#ifdef ENABLE_RSSI_BAR
    uint8_t               S0_LEVEL;
	uint8_t               S9_LEVEL;
#endif
    uint32_t MDC1200_ID;
} EEPROM_Config_t;

extern EEPROM_Config_t gEeprom;

void     SETTINGS_InitEEPROM(void);
void     SETTINGS_LoadCalibration(void);
uint32_t SETTINGS_FetchChannelFrequency(const int channel);
void     SETTINGS_FetchChannelName(char *s, const int channel);
void     SETTINGS_FactoryReset(bool bIsAll);
#ifdef ENABLE_FMRADIO
void SETTINGS_SaveFM(void);
#endif
void SETTINGS_SaveVfoIndices(void);
void SETTINGS_SaveSettings(void);
void SETTINGS_SaveChannelName(uint8_t channel, const char * name);
void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode);
void SETTINGS_SaveBatteryCalibration(const uint16_t * batteryCalibration);
void SETTINGS_UpdateChannel(uint8_t channel, const VFO_Info_t *pVFO, bool keep);
void SETTINGS_WriteBuildOptions(void);
extern int               key_dir;

#endif