SCREWS_TILT_CALCULATE dialog empty when re-running SCREWS_TILT_CALCULATE without FIRMWARE_RESTART

[sjorge]

Mainsail Version:

v2.5.0

Browser:

Firefox

Device:

Desktop PC

Operating System:

macOS

What happened?

First time running SCREWS_TILT_CALCULATE the nice info dialog with how to rotate the screws pops up. After ajusting and rerunning SCREWS_TILT_CALCULATE the dialog pops up but is now empty. The console stills shows the correct information though.

What did you expect to happen instead?

The dialog to also have the info the 2nd time running SCREWS_TILT_CALCULATE.

How to reproduce this bug?

• home (G28)
• SCREWS_TILT_CALCULATE
• < adjust as suggested by the dialog >
• SCREWS_TILT_CALCULATE
• < dialog is now empty >

Additional information:

My klipper config snipper

[screws_tilt_adjust]
screw1: -6, 28
screw1_name: front left screw
screw2: 158, 28
screw2_name: front right screw
screw3: 158, 193
screw3_name: rear right screw
screw4: -6, 193
screw4_name: rear left screw
horizontal_move_z: 10
speed: 50
screw_thread: CCW-M4

[meteyou]

pls post a screenshot from your browser console

[sjorge]

first time

second time

console log:

16:14:12
rear left screw : x=-6.0, y=193.0, z=-0.02083 : adjust CCW 00:01
16:14:12
rear right screw : x=158.0, y=193.0, z=-0.06125 : adjust CCW 00:04
16:14:12
front right screw : x=158.0, y=28.0, z=-0.08167 : adjust CCW 00:06
16:14:12
front left screw (base) : x=-6.0, y=28.0, z=-0.01042
16:14:12
01:20 means 1 full turn and 20 minutes, CW=clockwise, CCW=counter-clockwise
16:14:12
probe at -6.000,193.000 is z=-0.022500
16:14:11
probe at -6.000,193.000 is z=-0.022500
16:14:10
probe at -6.000,193.000 is z=-0.022500
16:14:10
probe at -6.000,193.000 is z=-0.022500
16:14:09
probe at -6.000,193.000 is z=-0.020000
16:14:08
probe at -6.000,193.000 is z=-0.015000
16:13:59
probe at 158.000,193.000 is z=-0.062500
16:13:58
probe at 158.000,193.000 is z=-0.062500
16:13:58
probe at 158.000,193.000 is z=-0.062500
16:13:57
probe at 158.000,193.000 is z=-0.062500
16:13:56
probe at 158.000,193.000 is z=-0.060000
16:13:56
probe at 158.000,193.000 is z=-0.057500
16:13:46
probe at 158.000,28.000 is z=-0.080000
16:13:46
probe at 158.000,28.000 is z=-0.080000
16:13:45
probe at 158.000,28.000 is z=-0.082500
16:13:44
probe at 158.000,28.000 is z=-0.082500
16:13:44
probe at 158.000,28.000 is z=-0.082500
16:13:43
probe at 158.000,28.000 is z=-0.082500
16:13:34
probe at -6.000,28.000 is z=-0.012500
16:13:33
probe at -6.000,28.000 is z=-0.012500
16:13:32
probe at -6.000,28.000 is z=-0.012500
16:13:32
probe at -6.000,28.000 is z=-0.010000
16:13:31
probe at -6.000,28.000 is z=-0.010000
16:13:30
probe at -6.000,28.000 is z=-0.005000
16:13:24
SCREWS_TILT_CALCULATE
16:13:00
rear left screw : x=-6.0, y=193.0, z=-0.03042 : adjust CCW 00:00
16:13:00
rear right screw : x=158.0, y=193.0, z=-0.07458 : adjust CCW 00:04
16:13:00
front right screw : x=158.0, y=28.0, z=-0.10167 : adjust CCW 00:06
16:13:00
front left screw (base) : x=-6.0, y=28.0, z=-0.02625
16:13:00
01:20 means 1 full turn and 20 minutes, CW=clockwise, CCW=counter-clockwise
16:13:00
probe at -6.000,193.000 is z=-0.032500
16:12:59
probe at -6.000,193.000 is z=-0.032500
16:12:58
probe at -6.000,193.000 is z=-0.032500
16:12:57
probe at -6.000,193.000 is z=-0.030000
16:12:57
probe at -6.000,193.000 is z=-0.030000
16:12:56
probe at -6.000,193.000 is z=-0.025000
16:12:47
probe at 158.000,193.000 is z=-0.075000
16:12:46
probe at 158.000,193.000 is z=-0.075000
16:12:46
probe at 158.000,193.000 is z=-0.075000
16:12:45
probe at 158.000,193.000 is z=-0.075000
16:12:44
probe at 158.000,193.000 is z=-0.075000
16:12:43
probe at 158.000,193.000 is z=-0.072500
16:12:34
probe at 158.000,28.000 is z=-0.097500
16:12:34
probe at 158.000,28.000 is z=-0.100000
16:12:33
probe at 158.000,28.000 is z=-0.100000
16:12:32
probe at 158.000,28.000 is z=-0.102500
16:12:31
probe at 158.000,28.000 is z=-0.105000
16:12:31
probe at 158.000,28.000 is z=-0.105000
16:12:22
probe at -6.000,28.000 is z=-0.027500
16:12:21
probe at -6.000,28.000 is z=-0.025000
16:12:20
probe at -6.000,28.000 is z=-0.027500
16:12:19
probe at -6.000,28.000 is z=-0.027500
16:12:19
probe at -6.000,28.000 is z=-0.027500
16:12:18
probe at -6.000,28.000 is z=-0.022500
16:12:11
SCREWS_TILT_CALCULATE
16:11:33
G28

browser console:

[joaovictor-local]

I am having this issue too. Sometimes I have the page opened on multiple devices and when triggering from one, the result is only showed on others.

[jmwhelan]

is there a way to turn off that dialog? I prefer to just read the console...

[meteyou]

i found this issue and fixed it in the PR #1329

[meteyou]

@jmwhelan will come with the PR #1319

[jmwhelan]

@jmwhelan will come with the PR #1319

Love you! Lol