values.yaml

# Default values for antmedia-helm.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.

replicaCount: 1

image:
  repository: nginx
  pullPolicy: IfNotPresent
  # Overrides the image tag whose default is the chart appVersion.
  tag: 2.11.3

imagePullSecrets: []
nameOverride: ""
fullnameOverride: ""

serviceAccount:
  # Specifies whether a service account should be created
  create: true
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""

podAnnotations: {}

podSecurityContext: {}
  # fsGroup: 2000

securityContext: {}
  # capabilities:
  #   drop:
  #   - ALL
  # readOnlyRootFilesystem: true
  # runAsNonRoot: true
  # runAsUser: 1000

service:
  type: ClusterIP
  port: 80

ingress:
  enabled: false
  className: ""
  annotations: {}
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
  hosts:
    - host: chart-example.local
      paths:
        - path: /
          pathType: ImplementationSpecific
  tls: []
  #  - secretName: chart-example-tls
  #    hosts:
  #      - chart-example.local

resources: 
  # We usually recommend not to specify default resources and to leave this as a conscious
  # choice for the user. This also increases chances charts run on environments with little
  # resources, such as Minikube. If you do want to specify resources, uncomment the following
  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  # limits:
  #   cpu: 100m
  #   memory: 128Mi
  requests:
    cpu: 4000m
  #   memory: 128Mi

autoscalingEdge:
  enabled: true
  minReplicas: 1
  maxReplicas: 10
  targetCPUUtilizationPercentage: 60
  # targetMemoryUtilizationPercentage: 80

autoscalingOrigin:
  enabled: true
  minReplicas: 1
  maxReplicas: 10
  targetCPUUtilizationPercentage: 60
  # targetMemoryUtilizationPercentage: 80

OriginNodeSelector: {}
EdgeNodeSelector: {}
MongoDBNodeSelector: {}
IngressNodeSelector: {}

tolerations: []

affinity: {}

origin: {}
edge: {}
mongoDB: mongo
licenseKey:

hostNetwork: true

image:
  repository: antmedia/enterprise
  tag: 2.11.3
  pullPolicy: IfNotPresent

provider:
  aws: false
  default: true

aws.ssl.arn: {}

annotations:
  default: {
    nginx.ingress.kubernetes.io/affinity: "cookie",
    nginx.ingress.kubernetes.io/proxy-body-size: "0m",
    nginx.ingress.kubernetes.io/session-cookie-name: "route",
    nginx.ingress.kubernetes.io/session-cookie-expires: "172800",
    nginx.ingress.kubernetes.io/session-cookie-max-age: "172800",
    nginx.ingress.kubernetes.io/ssl-redirect: "false"
  }
  aws: {
    alb.ingress.kubernetes.io/scheme: internet-facing,
    alb.ingress.kubernetes.io/target-type: ip,
    alb.ingress.kubernetes.io/listen-ports: '[{"HTTPS":443}, {"HTTP":80}]',
    alb.ingress.kubernetes.io/actions.ssl-redirect: '{"Type": "redirect", "RedirectConfig": { "Protocol": "HTTPS", "Port": "443", "StatusCode": "HTTP_301"}}',
    alb.ingress.kubernetes.io/target-group-attributes: stickiness.enabled=true
  }



affinityNode:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
        - matchExpressions:
          - key: nodepool
            operator: In
            
OriginCpu: {}
EdgeCpu: {}
kafkaURL:

UseGlobalIP: true
UseServerName: true
ReplaceCandidateAddress: true

TurnStunServerURL: 
TurnUsername: 
TurnPassword: 

ingress:
  ## @param ingress.enabled Enable ingress record generation for WordPress
  ##
  enabled: false
  ## @param ingress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param ingress.hostname Default host for the ingress record
  ##
  hostname: antmedia.local
  ## @param ingress.path Default path for the ingress record
  ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
  ##
  path: /
  ## @param ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/master/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param ingress.tls Enable TLS configuration for the host defined at `ingress.hostname` parameter
  ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
  ## You can:
  ##   - Use the `ingress.secrets` parameter to create this TLS secret
  ##   - Relay on cert-manager to create it by setting the corresponding annotations
  ##   - Relay on Helm to create self-signed certificates by setting `ingress.selfSigned=true`
  ##
  tls:
    - secretName: ant-media-server-origin
      hosts: []
      autoGenerated: true
      enabled: true
    - secretName: ant-media-server-edge
      hosts: []
      autoGenerated: true
      enabled: true
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: true
  ## @param ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
  ## e.g:
  ## extraHosts:
  ##   - name: wordpress.local
  ##     path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
  ## e.g:
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## e.g:
  ## extraTls:
  ## - hosts:
  ##     - wordpress.local
  ##   secretName: wordpress.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets Custom TLS certificates as secrets
  ## NOTE: 'key' and 'certificate' are expected in PEM format
  ## NOTE: 'name' should line up with a 'secretName' set further up
  ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
  ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## e.g:
  ## secrets:
  ##   - name: wordpress.local-tls
  ##     key: |-
  ##       -----BEGIN RSA PRIVATE KEY-----
  ##       ...
  ##       -----END RSA PRIVATE KEY-----
  ##     certificate: |-
  ##       -----BEGIN CERTIFICATE-----
  ##       ...
  ##       -----END CERTIFICATE-----
  ##
  secrets: []

persistence:
  config:
    enabled: true
    annotations:
    "helm.sh/resource-policy": keep
    ## bazarr configuration data Persistent Volume Storage Class
    ## If defined, storageClassName: <storageClass>
    ## If set to "-", storageClassName: "", which disables dynamic provisioning
    ## If undefined (the default) or set to null, no storageClassName spec is
    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
    ##   GKE, AWS & OpenStack)
    ##
    # storageClass: "-"
    ##
    ## If you want to reuse an existing claim, you can pass the name of the PVC using
    ## the existingClaim variable
    # existingClaim: your-claim
    accessMode: ReadWriteOnce
    size: 1Gi
    ## Do not delete the pvc upon helm uninstall
    skipuninstall: true