Skip to content

Latest commit

 

History

History
51 lines (45 loc) · 1.65 KB

README.md

File metadata and controls

51 lines (45 loc) · 1.65 KB
Raw

gtp5g - 5G compatible GTP kernel module

gtp5g is a customized Linux kernel module gtp5g to handle packet by PFCP IEs such as PDR and FAR. For detailed information, please reference to 3GPP specification TS 29.281 and TS 29.244.

Notice

Due to the evolution of Linux kernel, this module would not work with every kernel version. Please run this module with kernel version 5.0.0-23-generic or upper than 5.4 (Ubuntu 20.04).

Please check the libgtp5gnl version is the same as gtp5g, because the type translating between libgtp5gnl and gtp5g had been changed.

Usage

Compile

make clean && make

Install kernel module

Install the module to the system and load automatically at boot

sudo make install

Remove kernel module

Remove the kernel module from the system

sudo make uninstall

Create a gtp5g interface and update Rules

The gtp5g interface will be created by using libgtp5gnl scripts

  1. Checkout the latest or compatible source of libgtp5gnl
  2. cd libgtp5gnl
  3. Create an interface and update rules
    • sudo ./run.sh UPF_PDR_FAR_QER
  4. Troubleshoot
    • dmesg
    • echo #interfaceName #ID > /proc/gtp5g/pdr
    • cat /proc/gtp5g/pdr
  5. Delete an interface
    • sudo ./run.sh Clean
    • Note: It will delete list of rules and interface

Change Log

v0.2.0

  • Changed to host type between gtp5g and libgtp5gnl
  • Supported forwarding policy feature, but need to set ip rule and ip route with Linux mark by self
  • Fixed bugs about "any" and "assigned" in SDF filter

v0.1.0

  • First version
  • Supported packet matching about UE IP, TEID and SDF filter
  • Auto process packet by PDR/FAR